SECOMP 15.99.2188 PCIe GbE SFP Network Adapter User Manual
- July 11, 2024
- SECOMP
Table of Contents
SECOMP 15.99.2188 PCIe GbE SFP Network Adapter
Specifications :
- Product Name : VALUE PCIe GbE SFP Network Adapter
- Model Number : 15.99.2188
- Version: Ver. 1.00
- Features:
- Supports common 1G SFP optical and Direct Attached Copper modules
- Supports EEE (Energy Efficient Ethernet)
- Up to 9.5K Jumbo Frames
- IP, TCP and UPD checksum offloading (IPv4, IPv6) capabilities
- Designed to meet PCI Express Specification Revision 2.1
- One lane (x1) PCI Express compatible with x4, x8 and x16 PCI Express slots
- IEEE 802.1Q Tagged VLAN
- Supports Preboot eXecution Environment (PXE)
- Hardware Requirements:
- PCIe slot : 1-Lane PCI-Express slot Gen 2.0 or later
- Processor: Quad Core 3.0GHz or higher
- RAM: 4GB memory or higher
- Software Requirements:
- 32- and 64-bit operating systems are supported
- Windows 7/8.x/10/11
- Windows Server 2008 R2/2012 R2/2016/2019/2022
Product Usage Instructions
Hardware Installation:
- Turn off your computer.
- Unplug the power cord and remove your computer’s cover.
- Remove the slot bracket from an available PCIe slot.
- To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.
- Replace the slot bracket’s holding screw to secure the card.
- Secure the computer cover and reconnect the power cord.
Driver Installation:
You can download the driver from www.secomp-international.com
Verifying the Installation:
- Click on the Device Manager tab in the Windows Control Panel. Start > Control Panel > Device Manager
- Expand the Network adapters item, and you can read Intel(R)I210 Gigabit Fiber Network Connection in the Device Manager.
FAQ
- Q: What types of modules does the network adapter support?
- A: The network adapter supports common 1G SFP optical and Direct Attached Copper modules.
- Q: What are the recommended hardware specifications for the network adapter?
- A: The recommended hardware specifications include a PCIe slot: 1-Lane PCI-Express slot Gen 2.0 or later, Processor: Quad Core 3.0GHz or higher, and RAM: 4GB memory or higher.
All brand names and trademarks are the property of their respective owners.
Introduction
Chapter 1: Introduction
Product Introduction
This PCIe 1G SFP Network Adapter is a cost-effective solution that delivers fast and reliable 1 Gbps network access at longer distances. Using the SFP transceiver of your choice, you can connect your PCI Express-based server or workstation directly to your 1G fiber optic network.
Features
- Supports common 1G SFP optical and Direct Attached Copper modules
- Supports EEE (Energy Efficient Ethernet)
- Up to 9.5K Jumbo Frames
- IP, TCP and UPD checksum offloading (IPv4, IPv6) capabilities
- Designed to meet PCI Express Specification Revision 2.1
- One lane (x1) PCI Express compatible with x4, x8 and x16 PCI Express slots
- IEEE 802.1Q Tagged VLAN
- Supports Preboot eXecution Environment (PXE)
Requirements
Hardware
The following system specifications are recommended as a minimum:
- PCIe slot : 1-Lane PCI-Express slot Gen 2.0 or later
- Processor: Quad Core 3.0GHz or higher
- RAM : 4GB memory or higher
Software
32- and 64-bit operating systems are supported
- Windows 7/8.x/10/11
- Windows Server 2008 R2/2012 R2/2016/2019/2022
Package Contents
- 1 x PCIe 1-Port Gigabit SFP Network Adapter
- 1 x User Manual
Chapter 2: Getting Started
Hardware Layout
Link/Act
Link/Activity Indicator:
LED | Description |
---|---|
**Link Speed LED** | • Solid Green = 1000Mbps |
**Link /Activity LED** | • Solid Green = Network port is |
connected
• Flashing Green = Network port is active
Hardware Installation
- Turn off your computer.
- Unplug the power cord and remove your computer’s cover.
- Remove the slot bracket from an available PCIe slot.
- To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.
- Replace the slot bracket’s holding screw to secure the card.
- Secure the computer cover and reconnect the power cord.
Driver Installation
You can download the driver from www.secomp-international.com
Verifying the installation
-
Click on the “Device Manager” tab in the Windows Control Panel.
Start > Control Panel > Device Manager -
Expand the “Network adapters” item, and you can read “Intel(R) I210 Gigabit Fiber Network Connection” in the Device Manager.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>