SECOMP 19993230 VALUE Clamp On Power Strip Holder Instruction Manual
- June 9, 2024
- SECOMP
Table of Contents
SECOMP 19993230 VALUE Clamp On Power Strip Holder
installation
Clamps onto surfaces up to 2″(50mm) thick.
IMPORTANT: Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding or factory warranty.
INSTRUCTIONS OF SAFETY AND WARNINGS
Make sure that the mounting surface is strong enough to handle a mounted
product and equipment
DO NOT EXCEED THE MAXIMUM LISTEDWEIGHT CAPACITY.
- Always use an assistant or a mechanical lifting device to safely lift and position heavy products.
- Tighten screws firmly, but do not over tighten. Over tightening can cause product damage that greatly reduces the holding.power
- Keep a clear area and distance from moving parts when using the product.
- Do not use this product for any purpose not explicitly specified by the manufacturer. nis prOduct is intended ror indoor use ony.
- Any attempts to reconstruct the construction aren’t allowed.
- This product may contain small items that could be a choking hazard if swallowed. Keep children away uniess the product Is intended ror thneir use and all instructions and manuals are rully reviewed and understood by them.
- Check that the product is secure and safe to use at regular intervals (at least every three months)
should you ever have any questions or feel you require help please contact your place of purchase for assistance.
Ensure that you have received all parts according to the manual prior to installation. If any of the components are missing or damaged, contact your local seller for a replacement.
Read User Manual Online (PDF format)
Loading......