SECOMP AG 3206 CPS – Freestanding Leveling Feet Instruction Manual

June 9, 2024
SECOMP AG

3206 CPS – Freestanding Leveling Feet

Installation

CPS – Freestanding leveling feet
Art.-Nr.: 3206

Installation manual

manual instruction

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de

Caution!

Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.

If necessary, the installation area should also be secured. Falling parts can cause
injuries and material damage.

The materials included in the scope of delivery may not be suitable for the special
conditions at the installation site. Please check this in advance and replace it
with suitable materials if necessary.

If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.

Scope of delivery

scoupe

guide installation

Please take care of the orientation. (A) in the drawing is the back side.

Do not over tighten the screw. Leave a gap of 4 mm. That way the crossbar (A) will slide into the two feet (B and C).

installation

Assembly example

assemblyDimensions

Dimensions

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals