AVIGILON OP-EX-4E 4-Port Expansion Board User Guide
- July 10, 2024
- aVIGILON
Table of Contents
AVIGILON OP-EX-4E 4-Port Expansion Board User Guide
Installing
-
Snap the included standoffs into an enclosure.
-
Install the expansion board into the standoffs.
-
Connect the expansion board to the Access Control Core using the included USB cable.
-
Connect the expansion board to the power supply using the included power cable.
Warning: Do not apply power during wiring. Ensure the power supply is unplugged until all wiring is complete
-
Apply power to the power supply.
Example: North American power cord and outlet
Connecting Avigilon or Wiegand Readers
LED and BZR connections are not supported.
Connecting a Lock or Strike
Wiring a fail-safe lock or strike will unlock when power is out. Fail-secure
will remain locked when power is out.
Certifications
CE, IC, FCC, UKCA, RCM, UL 294
Power rating: 12VDC-24VDC*
Operating current requirements depend on the number of readers. For more
information, refer to the datasheet.
For More Information
Scan the following QR codes:
OP-EX-4E
Video Library
QuickStartGuide-OP-EX-4E-Rev2
© 2024, Avigilon Corporation. All rights reserved. AVIGILON and the AVIGILON logos are trademarks or registered trademarks of Avigilon Corporation. All other trademarks are the property of their respective owners. Unless stated explicitly and in writing, no license is granted with respect to any copyright, industrial design, trademark, patent or other intellectual property rights of Avigilon Corporation or its licensors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>