70mai A510 Series Dash Camera User Manual
- July 10, 2024
- 70mai
Table of Contents
70mai Dash Cam A510 Series User Manual
Scan the QR code and email us at help@70mai.com
View the User guide for product functions and FAQs.
https://help.70mai.asia/2371.html
Product overview
Please read this manual carefully before using the product and keep it in a safe place.
- Display screen
- Function buttons
- Power button
- Rear camera port
- Type-C power port
- Memory card slot
- Camera
- Speaker
- Mount slot
- Microphone
- Indicator light
- Adhesive sticker
Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
Download 70mai app
This product may be used in conjunction with the 70mai app. You can download
and install the app by scanning the QR code or finding “70mai” in the app
store.
Note: Android 5.0 & iOS 11.0 or above is required to connect to the dash
cam’s Wi-Fi hotspot with a mobile phone.
https://www.70mai.com/download/
Package contents
If you purchased the dash cam only, check the following items in the package:
- Dash Cam × 1
- Mount × 1
- Power cord × 1
- Car charger × 1
- Wiring trim tool × 1
- Electrostatic sticker × 2
- Adhesive sticker × 1
- User manual × 1
If you purchased the Dash Cam Set, check the following items in the package:
- Dash Cam × 1
- Mount × 1
- Power cord × 1
- Car charger × 1
- Wiring trim tool × 1
- Electrostatic sticker × 2
- Adhesive sticker × 1
- User manual ×1
- Rear camera package* × 1
- This package contains the rear camera (integrated with lead wire), signal wire and other accessories for the rear camera. For more information, please refer to the rear camera user manual.
Installation
-
Installing the electrostatic sticker
Paste the electrostatic sticker on the recommended area on the front windshield. Press the sticker to remove air bubbles out.
Avoid the edge of the windshield and select the flat and smooth area for the installation.
Note: Keep the windshield clean and dry without liquid residue to prevent the sticker from losing adhesion and dash cam from dropping. -
Installing the mount
Attach the mount to the mount slot and slide up. -
Installing the memory card
Insert the memory card into the slot. -
Mounting the dash cam
Paste the dash cam onto the electrostatic sticker. -
Routing cable
Route the power cord to the vehicle’s power outlet and connect to power.
Start the car engine, and the dash cam will automatically turn on.
Notes:
• Use the included wiring trim tool to hide the power cord underneath the vehicle’s headliner and rubber seal along the A-pillar.
• Depending on the vehicle, the power outlet may be located in a different position. The provided figure is for reference only. -
Adjusting the camera angle
Adjust the camera angle based on the image presented on the main screen when dash cam is turned on.
Accessories (optional)
The rear recording function of this product needs to be used with a rear
camera. Scan the QR code to obtain the user guide for the rear camera.
Note: To avoid the rear camera malfunction due to device incompatibility,
it is recommended to use a rear camera from 70mai brand.
https://help.70mai.asia/1472.html
Specifications
Product: Dash Cam
Model: A510, A510-1, A510-2
Input: 5V 2A
Battery capacity: 500mAh
Resolution: 2592 × 1944
Lens: FOV 138°/ F1.8
Battery type: Li-ion battery
Power supply: Car cigarette lighter
Wireless connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz,
Bluetooth® 4.2
Bluetooth/Wi-Fi operation frequency: 2400–2483.5MHz
GPS/GLONASS operation frequency: 1559–1610MHz
Bluetooth maximum output: < 13dBm
Wi-Fi maximum output: < 20dBm
Memory card instructions
- A memory card (sold separately) must be installed in the dash cam before use.
- The dash cam supports standard microSD cards. Please use memory cards with capacity of 32GB ~ 256GB and rating of class 10, U1 or higher.
- The default file partition format of the memory card may be inconsistent with the format supported by the dash cam. When inserting the memory card for the first time, please format it in the dash cam before use. Formatting the memory card will delete all files on the card. Please back up important data to another device beforehand.
- The memory card may become damaged or deteriorated after repeated cycles of overwriting, and this may affect its ability to save video and image files. If this occurs, immediately replace it with a new memory card.
- Please use a high-quality memory card purchased from a reputable vendor. Inferior memory cards may have issues such as actual reading/writing speeds that do not match the stated speeds, and an actual storage capacity that does not match the stated storage capacity. We shall not be held liable for lost or damaged videos caused by the use of a lowquality memory card.
- Do not insert or remove a memory card while the dash cam is turned on.
Precautions
Before using this dash cam, please read all the precautions and user guide to ensure correct and safe use.
- This dash cam is a driving aid designed to record external images of the vehicle. And it does not have the function of ensuring the user’s driving safety. Users must abide by local traffic rules and regulations and take driving safety as a priority consideration. Do not operate this product while driving.
- Due to differences in vehicle conditions, driving style, driving environment, and other factors, some functions may not work properly. A power failure, usage in environments outside the normal operating temperature or humidity range, a collision, or a damaged memory card may cause the dash cam to function abnormally. There is no guarantee that this dash cam will function normally under all circumstances. Videos recorded by this dash cam are for reference purposes only.
- Please install this dash cam correctly, and do not block the driver’s line of sight, or block the vehicle’s airbag, in order to avoid product failure or personal injury.
- If the front windshield where the dash cam is installed is covered with colored automotive film, it may affect the video recording quality or cause video distortion.
- Avoid collisions or forceful jolts to the dash cam, otherwise the product may malfunction. Keep this dash cam away from any strong magnetic fields.
- Never use chemical solvent or detergent to wash the dash cam.
- Do not use this dash cam in environments with temperatures over 60°C or below -10°C.
- When the dash cam has been operating for a period of time, the temperature of the outer casing will rise, please be careful when touching.
- Please only use this dash cam within the scope permitted by law.
- Please use the included car charger, power cord, and other accessories in order to avoid product failure due to non-conformance. We shall not be held liable for any loss or damage caused by the use of a non-genuine car charger or power cord.
- If you use power adapter to charge the dash cam, only use the power adapters that comply with the local safety standards or certified and supplied by qualified manufacturers.
- The dash cam and its accessories may contain small parts. To avoid choking or other hazards or damages caused by the children,keep the dash cam out of the reach of children.
Regulatory compliance information
WEEE information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as terms and conditions of such collection points.
EU declaration of conformity
The manufacturer hereby, declares that this equipment is in compliance with
the applicable Directives and European Norms, and amendments. The full text of
the EU declaration of conformity is available at the following internet
address:
https://help.70mai.asia/1193.html
Hereby, 70mai Co.,Ltd. declares that the radio equipment types A510, A510-1,
A510-2 are in compliance with Radio Equipment Regulations 2017. The full text
of the UKCA declaration of conformity is available at the following internet
address: https://help.70mai.asia/2145.html
Cautions
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- This device is equipped with a built-in battery that cannot be removed or replaced. Do not disassemble or modify the battery by yourself.
- Replacement of a battery with an incorrect type can defeat a safeguard (for example, in the case of some lithium battery types).
FCC
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
FCC ID: 2AOK9-A510
ISED compliance statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
ISED Radiation Exposure statement
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
IC: 28033-A510 CAN ICES-3(B) /NMB-3(B)
Service: help@70mai.com
For further information, please go to www.70mai.com
Manufacturer: 70mai Co., Ltd.
Address: Room 2220, Building 2, No. 588 Zixing Road, Minhang District,
Shanghai, China
V1.0-20240326
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>