Kara Pure Air to Water Dispenser User Manual

: July 10, 2024
: KARA

Table of Contents

Kara Pure Air to Water Dispenser
FAQ
Introductions
How Kara Pure works
Safety And Features
Filter Priming
Setup And Operation
Maintenance
The KaraPure Unit
Technical Specifications
Warranty
Contact Us
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kara Pure Air to Water Dispenser

FAQ

Q: How often should I replace the filters?
- A: Filter replacement is recommended as per the user manual guidelines or when the water quality starts to deteriorate.
Q: Can Kara Pure be used without a power outlet?
- A: No, Kara Pure requires a power source to operate efficiently.

Please read all Instructions before connecting your appliance to a power supply.
This user manual is for Kara Pure.

Read This Manual First

Important: Keep this manual in a safe place www.KaraWater.com

Introductions

Welcome to your new Kara Pure™.

Beginning today, you’ll be tapping into a brand new source of water, drawn from the very air around you. The purity is unquestionable. Its origin is organic.
Never question the source of your drinking water again.

For the best experience, please read the instructions before operating Kara Pure™.
Just wait until this water touches your lips. Your new experience is waiting for you.

What’s included in the box:

The Kara Pure unit
Power Cord
Drip Tray
Key
WIFI Manual
This User Manual

Introduction

Congratulations on your purchase of Kara Pure, the most advanced desiccant- based water harvester on the market. Simply plug in and enjoy the purest, freshest water you have ever tasted. No plumbing, mess or extra cost to install.

Simply plug in and enjoy!

Notes

Ensure that inlet and outlet exhaust ports are free from obstructions with a gap of at least 12 inches
Exhaust duct is on the left side of the unit.
Always ensure that outlet or power strip has surge protection when plugging in Kara Pure.

How Kara Pure works

Kara Pure harnesses the desiccant property of Zeolite. Zeolite is a naturally occurring volcanic rock that has a three dimensional crystalline structure which allows it to absorb and desorb water. Zeolite has a slight coconut taste.
Kara Pure operates on a simple three stage process using a circular zeolite harvesting “engine”:

Humid air is drawn into the unit and passed over the zeolite which then absorbs and captures the suspended water vapor.
The zeolite wheel is slowly rotated and heated to the point that the captured water is evaporated then moved by the fan into a chilled stainless steel reservoir where it becomes a liquid.
When the user presses the water dispensing butt on water is drawn from the reservoir and passed through five filter elements:
- Carbon filter 2x
- Anti-bacterial
- Ultraviolet
- Antioxidant
- Air filter (2 types)
- Anti -bacterial
- Anti -odor
- Ultrafilter (UF)
- Removal of particulate
- Alkaline Antioxidant Filter (AF)
- Improves odor and taste
- Alkalization (pH increase to 8.5 – 9.5
- Beneficial mineral release
- Ultra Violet (UV)
- Disinfectant for bacteria

Precautions

Ensure that inlet and outlet exhaust ports are free from obstructions with a gap of at least 12 inches
Unit must be kept upright
Do not place anything on top of unit
If unit is to be exposed to freezing temperatures, all water must be drained from the system

Safety And Features

Safety

The electrical output must be equipped with proper grounding
Always unplug the unit before maintenance
Always use parts supplied by the manufacturer. Failure to do so will void the warranty.
Before moving the location of the device, unplug and drain water reservoir
Indoor use only

Features

Simple one button operation
Activated carbon air filtration
10 liter water capacity
Five-stage water filtration
Food grade stainless steel water reservoir
Automatic recirculating loop for continuous sanitization
Built in fault and service indicati on system
See maintenance for further detail

Filter Priming

NO TOOLS REQUIRED.
Filter priming is an automatic function that occurs upon first use of your Kara Pure and can manually be entered when replacing your filters. Each new filter must be primed before consumption of the water.
During first use, your Kara Pure will automatically initiate Filter Priming.
Kara Pure will generate 3L of water which will take between 4 to 6 hours, depending on room humidity.
Once water generation is complete, Kara Pure’s interface will automatically change and ask to proceed to the next step.
Please follow the on-screen instructions to complete the Filter Priming of your Kara Pure.
Place a cup into pouring area and press “Begin” to start priming.
**Water may initially be discolored as loose particles from the filters are being removed. These particles contain carbon and minerals from the filters that naturally become loose during shipment and need to be recompacted. This is completely normal and will become clear upon completion on filter priming.
Continually pour water and discard. Your Kara Pure will change screens when you have completed the Filter Priming process.
Press “Conti nue’ to complete.

Setup And Operation

Remove the unit from the packaging and place on the floor in desired location which is close to a power outlet. Attach supplied power cord to unit. Place unit in a desired location close to a power outlet and plug in the wall socket.
Verify that power button is illuminated and that LCD, located at the top of the unit, is illuminated and displays the humidity in the room. You should also hear the fan start. If not, please refer to troubleshooting section.
Filters must be primed first or water may contain carbon or other loose particles from the filters. (See Filter Priming)

First Setup – WIFI

Welcome screen
Setup WIFI.
- Chose your access point
- Enter password
You can skip WIFI setup

System Status Screen

On the status screen you can see the device status and related information.
System status: Running or stopped.
System Error: In case of machine malfunction you can see possible a reason.
Wifi status.
Hot water temperature. Factory set.
Filter status. Over time, filters should be changed. You can see filter usage statistic and a notification when it should be changed.
Ambient temperature and humidity.

Maintenance

Filter Replacement

Unlock and open the back door
Filters are located at the bottom
“Water Sanitation/Carbon” filter is on the left and “Mineralizer” is on right
- NOTE: the order of filters is important!
To remove filters, twist to the left and the filter will detach
Replace old filter with new filter in the cap and twist to the right
NOTE: Do not over-twist because cap may become dislodged, damaged or it may break.

Cleaning

Air filters need to be vacuumed or cleaned every 3 months. Ensure vents are free of dust and debris.

The KaraPure Unit

Parts of the unit

Key

Pour Butt on
Air Filter Vent
Main Power Butt on
Door Lock
LCD Interface
Drip Tray

Accessing the Filters

To open the unit, position Kara Pure away from any obstructions.
Unplug the unit. Locate the key that arrived with the unit.
Locate the locking mechanism on the right hand side of the unit. Use the key to open the lock. You can now open the back door.

Technical Specifications

Model: Kara Pure™
Dimensions: 1070 mm/42.1” (H)
- 400 mm/15.75” (W)
- 220 mm/8.66” (D)
Power (AC): 110-120V or 220-240V
- 50-60Hz
Power Consumption: 588W
Color: Stainless Steel
Water Capacity: 10 Liters
Weight (empty): 32kg (71 lbs)
Operating Rh: 60%-80% Rh
Acoustic Footprint: 30 dB
- (harvesting mode)
Air Purification (ACH): 200 cfm
Water Output Purity: 99.9999%
Water pH: 8.5b to 9.5
- TDS-90-130
- (mineral content)
Particulates (TDS): <60
ORP (mV): -300 to -150
Construction: Stainless steel
- (food grade)
- BPA free plastic

Warranty

Kara Water warrants to the original purchaser of this product that it will be free from manufacturing defects in workmanship or material for a period of agreed warranty term of 1 year from shipment date. If within your warranty term from the shipment of this product fails due to defect in workmanship or material, Kara Water will replace the defective part with a new, or rebuilt part. Warranty is non-transferable.

The Warranty does not cover or apply to:

Damage to the product due to misuse, mishandling, or abuse
Product not assembled or installed according to manufacturer’s instructions
Normal wear and tear
Improper environmental placement of appliance
Lack of water production due to humidity or temperature levels
Not following the User’s Manual
Acts of God
Consequential damage and incidental damages such as damage to person or property

Refer to www.karawater.com/contact and click on Support for more information or email to support@karawater.com
Go to www.karawater.com/support for updated versions of this User Manul.