viveroo REV20211220 Premium IPad User Manual

: October 30, 2023
: viveroo

Table of Contents

Safety Information
Technical Data
Installation
Notes on PoE Adapters
Warranty
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

viveroo REV20211220 Premium IPad

Safety Information

! Warning Please read the assembly instructions included carefully. Please read this iPad wall mount user manual completely before using it. Please follow the instructions and recommendations to ensure proper use and maximum enjoyment.

Safety information All viveroo mounting sets are intended for use in enclosed and dry living spaces.

The following conditions must be provided:

Operating temperature between 0° C (32° F) and 35° C (95° F).
Relative humidity (during use): 20 % to 90 %, non-condensing.
No external environmental influences such as oil, chemicals, salt, extensive dust, etc.

Installation, service or repairs, if necessary, may only be performed by authorized persons.
The maximum altitude is 2.000m.

The installer is responsible for selecting the proper mounting location and safe installation of the one. This also applies to installation in movable parts, such as doors. The installer is responsible for performing and documenting all necessary safety tests.
All electrical installation work may only be conducted by authorized, trained electricians, always adhering to the general rules and regulations applying to electrical installation.
Should it become apparent that safe operation of the one is not assured, then the one must immediately be taken out of service and secured against potential misuse. If the one functions are limited, blocked or disabled, if an unusual odor is present, if noises such as scratching are audible or damage is visible, safe operation can no longer be guaranteed.

Technical Data

Product contents

User manual one
Mounting plate
screw set

Compatibility

Electrical operation of viveroo iPad mounts is permitted only in connection with viveroo Mounting Set and power supply and cable included in the Mounting Set. Operation of viveroo iPad mounts without a Mounting Set will lead to immediate loss of guarantee and warranty.

Measurements in millimeter

Measurements design cover one for …

… iPad mini 217 x 143
… iPad 10.2 inch, Air, Pro 10.5 inch 275 x 183
… iPad Pro 11 inch 270 x 187
… iPad 10.9 inch (10 Gen) 270 x 187
… iPad Pro 12.9 inch 307 x 224

Depth one 15
Mounting plate 3
Size of opening (for furniture installation) Round hole 40mm to put the connector through

Size of opening (for flush-mounted box) elongated hole 68 x 139

Installation depth (for furniture) 30
Installation depth (for flush-mounted box) 75

Weight in gram

… iPad mini 740
… iPad 10.2 inch, Air, Pro 10.5 inch 866
… iPad Pro 11 inch 952
… iPad 10.9 inch (10 Gen) 952
… iPad Pro 12.9 inch 1.118

Electrical connections

Power supply 100-240Vac, 50-60Hz 12,5Watt – 18Watt
Power consumption depending on iPad and power supply

Removal from power supply The one may be removed from the power supply via the circuit breaker in the respective rooms.

Installation

Use the corresponding MountingSet to install your one. All MountingSets come with specific mounting instructions.
Illustration are examples. Depending on the iPad and USB port, another power adapter and cables can be supplied.

Step 1 The one can be installed in both portrait and landscape format. Please refer to the assembly instructions for the respective assembly set.
! Note: These instructions show the assembly in a cavity wall with a flush- mounted cavity wall socket (Inwall assembly set). The one is installed here in landscape format as an example. If you screwed the one directly to the surface without a flush-mounted box, please continue with Step 2.

Connect the USB connector that will later be used to power the iPad.
For one with PoE (power and data via the network cable): Insert the PoE adapter into the installation socket from your mounting set and attach the adapter plate of the mounting set. For using the one with a PoE Adapter, also see the notes on page 6 of this document.
Step 2 2.1 Attach the adapter plate of the one to the assembly set using the holes provided for this purpose. Guide the USB cable through the long hole in the middle of the plate.

Alternatively
2.2 If you want to install the one without the viveroo mounting set or if you want to screw the bracket directly onto the wall, use the four outer holes and the screws provided. See also the notes on page 6 of these instructions.
Step 3 Take the frame of the one and run the USB cable in the middle and fix it in the cable duct. The cable should then protrude about 2 cm from the cable duct.
Step 4 Mount the frame on the adapter plate. The 4 middle holes are used for this. There are several threads for aligning the one.
Step 5 Place the iPad in the iPad in the one and connect the USBC or Lightning connector. Warning: In this state, the iPad is not yet secured in the one to prevent it from falling out.
Step 6 Secure the iPad with the cap and fix it with the two small screws. Now the iPad is secured and can no longer fall out.

Notes on PoE Adapters

PoE Adapter for iPads with Lightning connector.

PoE Adapter for iPads with USB-C connector.
Note : Use the orange wall box and mounting plate to attach the viveroo iPad mount to the wall. Place the PoE Adapter inside the backbox. Please also note the enclosed instructions of the PoE Adapter.

Warranty

viveroo products come with a one year warranty from date of purchase by the original end customer, unless the device was repaired or replaced during the warranty period. In this case, the warranty is valid until the end of the regular two year warranty or six months following the repair/replacement, whichever comes first.

Warranty claims and verification Should your viveroo product for any reason not perform as expected, please contact your dealer and provide the original invoice with serial number as well as a brief description of your complaint

Warranty claims and verification

The following devices are excluded from the warranty
Devices with damages caused by:

acts of nature,
misuse, including but not limited to disregarding the user manual and mounting instructions,
inappropriate handling,
connection to an incorrect power supply,
repairs or attempted repairs by unauthorized persons,
use of the device in connection with third party products, devices on which the serial number of the producer has been changed, deleted, removed or made illegible.

Apple, iPad and Lightning are registered trademarks of Apple Inc.