AVIGILON H6A Ceiling Mounting Template Instructions
- July 9, 2024
- aVIGILON
Table of Contents
AVIGILON H6A Ceiling Mounting Template
Product Specifications:
- Model: H6A In-Ceiling Mounting Template
- Bezel: 8.66 in (220.0 mm)
- Spring Clearance: 9.81 in (249.2 mm)
- Camera Hole: 7.5 in (190.5 mm)
Product Usage Instructions
Print this mounting template on an 11”x17” paper in order to maintain the correct size of the mounting template. Print this template at its original size and do not use any scaling in your print options.
Verify that the template is printed to the correct size by measuring the outer magenta-colored box and comparing it to the dimensions below:
- Height: 259 mm (10.2”)
- Width: 259 mm (10.2”)
Printing and Verifying Mounting Template:
- Print the mounting template on an 11×17 paper without scaling.
- Measure the outer magenta-colored box to verify correct sizing.
- Dimensions to check: Height – 259 mm (10.2 in), Width – 259 mm (10.2 in).
Frequently Asked Questions
Q: Can I scale the template when printing?
A: It is recommended to print the template at its original size without
any scaling to ensure accuracy in mounting.
Q: What should I do if the printed template does not match the specified
dimensions?
A: If the printed template does not match the dimensions mentioned
(Height: 259 mm, Width: 259 mm), please recheck your printing settings and
reprint without scaling.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>