UIC BEZEL8-S, BEZEL8-S Credit Card Reader User Manual
- July 10, 2024
- UIC
Table of Contents
UIC BEZEL8-S, BEZEL8-S Credit Card Reader
Specifications:
- Processor: Microchip SAMA5D23
- Memory: DDR3 256MB
- Storage: QSPI-Flash 32MB
- Display: Graphic LCD @ 128 x 64
- OS: Linux
- Audio: Buzzer 70dB @ 10cm
- Reader:
- Magnetic Card Reader: Bi-directional, support triple tracks ISO7811, Speed 5 to 40 IPS, 1,000,000 swipe times
- Smart Card Reader: ISO7816, T=0 , T=1, EMV Level 1, Support 5V/3V, 500,000 inserted times
- Contactless Reader: Support ISO 14443 Type A/B and Mifare with 4 LEDs, EMV contactless L1
- I/O: RS-232/USB
Product Usage Instructions
Installation Guide (RS232 Interface):
- Plug the RS232 cable into the port of the PC or system.
- The reader will boot up automatically.
FAQ:
-
What are the environmental specifications of the BEZEL8-S Credit Card Reader?
The storage temperature range is 5% to 90% humidity. The reliability requirements include an MTBF of 50,000 hours and ESD resistance of Contact+/- 8KV Air+/-15KV. -
How many LED indicators are present on the reader?
There are four LED indicators for RFID, one set for MSR, and one set for ICC. -
What communication options are available with the BEZEL8-S Credit Card Reader?
The reader supports communication via Ethernet and optional WiFi.
Specification
Specification
Processor| Microchip SAMA5D23
Memory| DDR3 256MB
Storage| QSPI-Flash 32MB
Display| Graphic LCD @ 128 x 64
OS| Linux
Audio| Buzzer≧70dB @ 10cm
Reader
Magnetic Card Reader
| Bi-directional, support triple tracks ISO7811
Speed 5 to 40 IPS
1,000,000. swipe times
Smart Card Reader
| ISO7816, T=0 , T=1
EMV Level 1, Support 5V/3V 500,000. inserted times
Contactless| Support ISO 14443 Type A/B and Mifare with 4 LEDs, EMV
contactless L1
I/O
RS-232/USB| USB(VCOM) or RS232, Cable-select
AUX| RS232, as auxiliary port
LAN| 10BASE-T/100BASE-T ethernet
DC in| 5V, 1A
SAM| x 1
Debug console| Special cable through auxiliary port
LED indicator| x 4 for RFID, 1 set for MSR, 1 set for ICC
Buttons| Rubber button x 2
Communication
Ethernet| x 1 (Optional)
Wifi| x 1 (Optional)
Environment
Operating Temperature| -20°C to +70°C
Storage Temperature| -30°C to +80°C
Humidity| 5% to 90%
Reliability Requirements
MTBF| 50,000 hours
ESD| Contact：+/- 8KV Air：+/-15KV
Centurion/ Metal card：+/- 8KV(insert half of the card)
| Button | 1M times |
|---|---|
| IP Level | IP54 |
| IK Level | IK06 |
| UV | UV exposure resistance |
Installation guide
RS232 Interface
| 1 | Plug the RS232 cable to the port of PC or system |
|---|---|
| 2 | The reader will boot up automatically |
| 3 | The reader will boot up automatically |
Photos
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FC C Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
CAUTION
Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF exposure statements
This Transmitter must not be co‐located or operating in conjunction with any
other antenna or transmitter. 2. This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body or nearby persons.
Uniform Industrial Corp. 2901 Bayview Dr, Fremont, CA 94538 TEL :
+1-510-438-6799 FAX :
+1-510-438-6790 E-Mail :
info@uicusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>