DAYSNEW BN982 ANC Bluetooth Headphone User Manual

DAYSNEW BN982 ANC Bluetooth Headphone

INTRODUCTION
Dear customers: Thank you for purchasing the high-quality ANC Bluetooth Headphone BN982 provided by DAYSNEW.

FEATURE

1. This headphone with sophisticated electronics can reduce low frequency ambient noise by up to 40dB. Environmental noises in airplanes, trains, buses, and noise caused by air-conditioners can be reduced by ANC function. For this reason, sound with high frequency portion, from car horns telephones and human voices, remain relatively intact for your travel safety.
2. ANC function will protect your hearing with comfortable volume when you enjoying favorite music in public. You can also take a nap or do some meditations quietly by activating ANC function with no music.
3. 50 hours play time with ANC function.
4. Transparent mode of noise cancelling function.

COMPATIBLE WITH VARIOUS DEVICES
BN982 can be widely adapted to audio devices with Bluetooth function, such as mobile phones, computers, tablets, laptops, MP3 players, etc.

ABOUT ACTIVE NOISE CANCELLATION

ANC Headphone BN982 creates a sound wave with the same amplitude but with inverted phase (also known as antiphase) that is 180 degrees out of phase from the original sound wave (noise). The waves combine to form a new wave, in a process called interference, and effectively cancel each other out – an effect which is called destructive interference. This effectively reduces the volume of the perceivable noise.

PACKAGE CONTENTS

1. Active Noise Cancelling Headphone
2. USB-A→USB-C Charge Cable
3. User Manual

OPERATION

CHARGE

1. Please charge the headphone more than 5 hours before first use. It will activate the best performance of the batteries. Please turn off the headphone before charging.
2. Please use the cable attached with the package to charge. Connect USB-C jack to headphone and USB-A to adapter (not included), then connect to the main power source.
3. Power LED is in solid red when charging. Headphone will be fully charged in 5 hours and red LED will turn into green.

HOW TO USE

POWER ON/OFF

1. ON: When headphone is off, press and hold the power button for 3 seconds until the power LED lights up in blue, you will hear voice prompt “Power on”. If the headphone is not paired with any audio device, you will hear voice prompt “Pairing”. Power LED will flash in blue, indicating headphone is waiting for pair. The headphone will automatically turn off in 5 minutes if no device is paired.
2. OFF : When headphone is on, press and hold the power button for 3 seconds until the power LED turn off, you will hear voice prompt “Power off”. If ANC function is already on, this function will be turned off at the same time and ANC LED will be off.

PAIRING MODE

1. When headphone is off, press and hold the power button for 5 seconds until the power LED blinks in blue, you will hear voice prompt “Power on” and “Pairing”. Now headphone is ready to pair.
2. Turn on Bluetooth of your device, search the pairing device BN982 then connect it. You will hear voice prompt “Connected” when the pairing process is completed.
3. To pair a new audio device, please disconnect original device from headphone first. Then you will hear voice prompt “Pairing”, new device can be paired to headphone now.
4. The duration of pairing mode is 5 minutes. If you don’t connect any device to the headphone, it will turn off automatically and you will hear voice prompt “Power off”.

MEMORY RE-CONNECTING
After the headphone and device are paired successfully, headphone will automatically connect with the device that previously paired with next time. Please press and hold the power button for 3 seconds until the power LED lights up in blue, you will hear voice prompt “Power on” and “Connected”.

ANC FUNCTION

1. The ANC function can only be used after the headphone is turned on, ANC function will be off when headphone power is off. When headphone power is on, press and hold ANC button for 2 seconds to activate ANC function. You will hear voice prompt “ANC on” and ANC LED will glow in solid red.

2. You can activate ANC function without connecting any device or playing audio, it will provide a quiet space by reducing low-frequency ambient noise from surrounding. If the headphone is in pairing mode or not connecting any device, power and ANC function will automatically turn off in 5 minutes. Please connect the headphone to device before activating ANC function for hours.

3. Transparent mode
   When ANC function of headphone is activated, press and hold ANC button for 2 seconds ANC LED will be off. Then switch to transparent mode and hear voice prompt. In this mode you will hear more details of external sound for travel safety. It will be more clear when you have conversation with people without removing headphone.

4. When headphone is in transparent mode, press and hold ANC button for 2 seconds to deactivate all ANC function, you will hear voice prompt “ANC off”.

PLAY CONTROL

• Play /Pause/ Answer/Hang up: Press
• Reject calls: MFB button press and hold 25
• Voice Assistant: MFB button triple-click
• Volume up: Press (Beep indicates maximum volume)
• Volume down: Press (Beep indicates minimum volume)
• Previous song: Hold
• Next song: Hold

LED STATUS

TROUBLESHOOTING

Q1. ANC function will affect the sound quality of music?
A: It won’t be. Active Noise Cancellation function creates a sound wave with the same amplitude but with inverted phase (also known as antiphase) that is 180 degrees out of phase from the original sound wave (noise). The waves combine to form a new wave, in a process called interference, and effectively cancel each other out. It won’t interfere with the transmission and decoding of audio signals. You will enjoy music with more details in a quiet space.

Q2. Can I turn on ANC without playing music?
A: Certainly you can. But please don’t forget turn on headphone before activating ANC. When power is on, headphone will automatically turn off without pairing any device in 5 minutes. We recommend you connect a Bluetooth device to headphone first. Then you can activate ANC without playing audio or sound so that you would take a nap or do some meditations quietly.

Q3. Headphone cannot be paired?
A: Please find out what status of the headphone through the power LED (Please refer to the above LED STATUS). If you still can’t confirm whether the headphone is paired, please turn off the headphone. After that press and hold the power button for 5 seconds until the power LED blinks in blue, you will hear voice prompt “Pairing”. Now headphone is ready to pair, connect to device you will hear voice prompt “Connected” when the pairing process is completed.

Q4. How to reboot headphone?
When headphone power is on, press and hold ANC button, MFB button for 10 seconds to reboot the headphone.

SPECIFICATIONS

• Bluetooth Version: V5.2
• Chipset : BES2300
• Driver Unit: 40mm
• Frequency Response: 20Hz~20KHz
• ANC Effect: 40dB
• Working Time: 60 Hours
• Charge Time: 5 Hours
• Working Range: 30 Meters

FCC

CAUTION For your travel safety, DO NOT uses the headphone when crossing the road or riding.
Prolonged exposure to Excessive sound pressure from headphones may cause permanent hearing loss.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC ID：2APBSBN982-001R

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>