VERTIV Smart Row 2 Infrastructure Solution Instruction Manual

: July 10, 2024
: VERTIV

Table of Contents

VERTIV Smart Row 2 Infrastructure Solution
Specifications
Product Usage Instructions
- Installation and Setup
Frequently Asked Questions (FAQ)
INTRODUCTION
Submittal Drawings
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VERTIV Smart Row 2 Infrastructure Solution

Specifications

Row IT Load Capacity : 20 kW
Power Redundancy UPS: Yes
Power Redundancy rPDU: Yes
Cooling Redundancy: Yes
Dimensions:
- Length: 13.78 ft
- Depth: 4.6 ft
- Height: 7.38 ft

Product Usage Instructions

Installation and Setup

Before starting the installation, ensure you have all the necessary components mentioned in the submittal drawings.

Unpacking and Placement
Unpack the SmartRowTM 2 Infrastructure Solution components carefully and place them in the desired location following the provided layout visuals.

Assembly
Assemble the VertivTM MSR2 IT Rack and Power Management Cabinet as per the provided isometric views.

Wiring and Connections
Refer to the wiring diagrams for proper installation of the Power Management Units, Cable Trays, Monitoring Systems, and other components.

Configuration
Configure the system based on your power requirements using the Maximum Power Configuration Schematic Diagrams.

Testing
After installation and configuration, test the system to ensure all components are functioning correctly.

Frequently Asked Questions (FAQ)

How can I resolve installation or operational issues with the product?
Check the relevant sections of the manual for outlined procedures. For additional assistance, visit Vertiv Technical Support Site.

INTRODUCTION

The information contained in this document is subject to change without notice and may not be suitable for all applications. While every precaution has been taken to ensure the accuracy and completeness of this document, Vertiv assumes no responsibility and disclaims all liability for damages result from use of this information or for any errors or omissions.
Refer to local regulations and building codes relating to the application, installation, and operation of this product. The consulting engineer, installer, ‘ and/or end user is responsible for compliance with all applicable laws and regulations relation to the application, installation, and operation of this product.
The products covered by this instruction manual are manufactured and/or sold by Vertiv. This document is the property of Vertiv and contains confidential and proprietary information owned by Vertiv. Any copying, use, or disclosure of it without the written permission of Vertiv is strictly prohibited.
Names of companies and products are trademarks or registered trademarks of the respective companies. Any questions regarding usage of trademark names should be directed to the original manufacturer.

Technical Support Site
If you encounter any installation or operational issues with your product, check the pertinent section of this manual to see if the issue can be resolved by following outlined procedures.
Visit https://www.vertiv.com/en-us/support/ for additional assistance.