OSRAM PLATFORMA FG Highbay User Manual
- July 9, 2024
- OSRAM
Table of Contents
OSRAM PLATFORMA FG Highbay
Product Specifications :
- Dimensions: L: 116.5mm, W: 55mm, H: 13mm
- Power Source: AAA batteries
Product Usage Instructions
Key Functions:
-
ON/OFF Auto Reset: Set light permanently ON or
OFF without motion mode. -
Power (80%/100%) Brightness (+/-): Adjust
power output to 80% or 100%. -
Function: Switch to sensor mode and restore
the latest sensor setting. -
Program Mode: Enter program mode, set
parameters, save settings, and apply them. -
Setting the Light:
Press and hold the specific buttons as mentioned in the manual to configure the light settings according to your preference. -
Sensor Settings:
Adjust sensitivity, hold time, standby dimming level, standby period, and daylight threshold using the program mode function. -
Power Adjustment:
To adjust power output from 20% to 100%, press and hold the corresponding button as instructed.
Frequently Asked Questions (FAQ):
-
Q: What should I do if the program mode exits automatically?
A: After pressing the Start button, ensure you select a parameter within 30 seconds. If no button is pressed during this time, the program mode will exit automatically. -
Q: What is the significance of the ambient brightness setting?
A: The sensor operates based on ambient brightness levels. When set to ‘disable’, it detects motion regardless of ambient light conditions. -
Q: How can I save the settings I have configured?
A: Press the Memory button after selecting your desired parameters in program mode to save the settings.
PLATFORMA® FG Highbay
Programable one key commission remote controller
User Manual
- Please read the instruction carefully before using the product
- Please keep the instruction as reference in the future
PLATFORMA® FG Highbay- Remote Controller
The Remote control requires AAA batteries to operate.
| Key | Function |
|---|---|
| ON/OF | Setting the light permanent ON or OFF without motion mode |
| Auto | Switch to sensor mode and restore the latest sensor setting |
| Reset | Turn the sensor in a default setting (3s hold time, 0s stand-by period, |
lux disable, 100% sensitivity).
Power (80%/100%)| Quick setting to turn power output to 80% or 100%
Brightness (+/-)| Press and hold this button to adjust the power output from
20% to 100%, applicable in both permanent ON mode and sensor mode.
| Key | Function | |
|---|---|---|
| Start | Program Mode |
- Press Start to enter program mode, then choose from the following options by pressing the corresponding button:
- Sensitivity
- Holdtime
- Standby dimming level
- Standby period
- Daylight threshold
- Press Memory to save the parameters selected in step 1 (1 -5 )
- Apply to transmit the selected parameters (1 -5) to the target sensor. Remark: After pressing the Start button, you must select any parameter button (1 -5) within 30 seconds. The time window between pressing any button is also 30 seconds. If no button is pressed within this timeframe, the program mode will automatically exit.
Memory| Save Setting
Apply| One Key Apply
Sensitivity| | In this area, movement will be detected and able to trigger the
sensor. 100% detection area is also known as the strongest sensitivity.
Hold time| | The duration for which the light maintains 100% brightness after
moving objects have left the detection area.
Stand-by dimming level| The dimming level in the standby period.
Stand-by period| The duration during which the light remains at a low output
before being fully switched off. When set to “+∞”, the light continuously
operates at a low output if no movement is detected in the detection area,
remaining illuminated without turning off.
Daylight threshold| Definition of ambient brightness: The sensor operates
only when the ambient brightness falls below the preset lux threshold. When
set to ‘disable’, the sensor detects motion regardless of ambient brightness
levels.
SERVICE CONTACT
- Haneco Lighting Australia Pty LTD 262 Marion Road, Netley, South
- Australia 5037
- Phone: 1300 001 533
- Haneco.com.au
- 1300 001 533
- OSRAM is a trademark of OSRAM GmbH.
- TRAXON is a licensee of product trademark OSRAM for a fixed list of General Lighting product.
- Haneco Lighting Australia is a Traxon distributor of OSRAM products in Australia, New Zealand and Pacific Islands.
- OSRAM OFFICIAL LICENSEE
- Traxon Technology Ltd. 213 Wireless Centre,
- 3 Science Park East Avenue, Science Park, Shatin,
- New Territories, Hong Kong
- Phone: +852 2943 3488 www.traxon-ecue.com