Lynx HR-6 Alfa Audio Solutions User Manual

Lynx HR-6 Alfa Audio Solutions

Before starting to use this device, please read this instruction manual carefully.
Keep these instructions in the place where the equipment will be used and with easy access to them.

Heavy equipment

• Apply back protection when using the system. Avoid loading and unloading at heights.

Hearing damage risk

• These systems can reproduce large quantities of sound pressure which can damage hearing. Take precautions if you are going to be near them for extended amounts of time and do not get too close.

Hanging / Flying

• Do not hang the cabinets from the handles or any other part other than the designated hanging point. When flying this system please observe the technical and “Rainbow” software data. Never exceed the maximum safe working loads or ignore the instructions included within this manual. Use Only flying accessories provided by Lynx Pro Audio S.L. Rigging must be always carried out by professionals.

Delicate Material

• Please ensure no foreign object or water enters the speaker. Only clean the unit with dry clothes. Do not use solvents.

Overheating / Fire risk

• To reduce the risk of the speaker overheating, avoid direct contact with sunlight. Avoid placing the unit close to heat-inducing objects such as radiators. Do not cover the equipment in use and do not block any ventilation openings. Do not put naked flame, such as lighted candles, close or on top of the unit.

Electromagnetic and interferente emissions

• Avoid placing objects that through electromagnetic waves can damage the unit, such as mobile phones, laptops, magnetic strip cards, etc.
• This system complies with normative

EN 55103-1 (1)
EN 55103-2 (2)

1. This device may not cause harmful interferences.
2. This device may receive interference including interferences that may cause undesired working.

IMPORTANT NOTE

• This Equipment must be used per these instructions and by trained professional personnel only.
• This equipment should not be used in places with extreme tropical climates. Don’t expose this apparatus to extreme humidity and or temperature values.

CABINET CONNECTIONS

Normative

• The HR cabinets meet the following standards:
• EN 55103-1:1996: Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use (-1 Emmision).
• EN 55103-1:1996: Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. (-2 Immunity)
• EN 60065:2002: Audio, video and similar electronic apparatus. Safety requirements.

Connectors

• The HR cabinets have a connection panel at the rear of the cabinet. This consists of 2 internally bridged Neutrik NL4-MP connectors which apply no process to the signal.
• Note: If pins +-2 are not used they will still be internally bridged.
• The following table indicates which pins are used for all the models, with passive and bi-amplified modes.

PASSIVE| Connector| Speakon connections| per box| Impedance| Rated power| Program power
---|---|---|---|---|---|---
HR-6| NL4MP| ±1| 2| 16 Ω| 200 W AES| 400 W AES
HR-108| NL4MP| ±1| 2| 8 Ω| 300 W AES| 600 W AES
HR-1564/7| NL4MP| ±1| 2| 8 Ω| 700 W AES| 1400 W AES
HR-1596/7| NL4MP| ±1| 2| 8 Ω| 700 W AES| 1400 W AES
HR-1264/7| NL4MP| ±1| 2| 8 Ω| 700 W AES| 1400 W AES
HR-1296/7| NL4MP| ±1| 2| 8 Ω| 700 W AES| 1400 W AES
HR-1564/5| NL4MP| ±1| 2| 8 Ω| 500 W AES| 1000 W AES
HR-1596/5| NL4MP| ±1| 2| 8 Ω| 500 W AES| 1000 W AES
HR-1264/5| NL4MP| ±1| 2| 8 Ω| 500 W AES| 1000 W AES
HR-1296/5| NL4MP| ±1| 2| 8 Ω| 500 W AES| 1000 W AES
HR-208| NL4MP| ±1| 2| 4 Ω| 500 W AES| 1000 W AES
HR-206| NL4MP| ±1| 2| 8/4 Ω| 400 W AES| 800 W AES
HR-218/36| NL4MP| ±1| 2| 4 Ω| 3600 W AES| 7200 W AES
HR-218/20| NL4MP| ±1| 2| 4 Ω| 2000 W AES| 4000 W AES
HR-215S| NL4MP| ±1| 2| 4 Ω| 2000 W AES| 4000 W AES
HR-18/10| NL4MP| ±1| 2| 8 Ω| 1000 W AES| 2000 W AES
BI-AMP| Connector| Speakon connections| per box| Impedance| Rated power| Program power
---|---|---|---|---|---|---
HR-1564/7| NL4MP| LF ±1 / HF ±2| 2| 8 Ω| 700 W / 80 W| 1400 W / 160 W
HR-1596/7| NL4MP| LF ±1 / HF ±2| 2| 8 Ω| 700 W / 80 W| 1400 W / 160 W
HR-1264/7| NL4MP| LF ±1 / HF ±2| 2| 8 Ω| 700 W / 80 W| 1400 W / 160 W
HR-1296/7| NL4MP| LF ±1 / HF ±2| 2| 8 Ω| 700 W / 80 W| 1400 W / 160 W
HR-1564/5| NL4MP| LF ±1 / HF ±2| 2| 8 Ω| 500 W / 60 W| 1000 W / 120 W
HR-1596/5| NL4MP| LF ±1 / HF ±2| 2| 8 Ω| 500 W / 60 W| 1000 W / 120 W
HR-1264/5| NL4MP| LF ±1 / HF ±2| 2| 8 Ω| 500 W / 60 W| 1000 W / 120 W
HR-1296/5| NL4MP| LF ±1 / HF ±2| 2| 8 Ω| 500 W / 60 W| 1000 W / 120 W
HR-208| NL4MP| LF ±1 / HF ±2| 2| 4 Ω| 500 W/ 70 W| 1000 W / 140 W
HR-206| NL4MP| LF ±1 / HF ±2| 2| 8/4 Ω| 400 W / 70 W| 800 W / 140 W

Connectors

• To connect the speaker follow the instructions in fig. 1:
• Insert the male speakon in its corresponding hole and turn right until it clicks. This fixes it safely and strongly and helps stop it from being pulled out by mistake.
• At the other end of the cable connect in the same way to the amplifier channel.
• Furthermore, the cabinets HR-6 and HR-108 can be supplied with 4 terminal blocks (7.62 mm between pins) instead of the Neutrik NL4-MP.

Recommendations

Always ensure cables are in good condition. Know the recommended cable length and thickness according to the cabinet and quantity you are installing. An incorrect connection can affect the functioning of the system or even damage it. Cable thickness will vary according to cabinet impedance, quantity and distance. This is especially important when connecting Subwoofers.

Maximum recommended cable length for low-impedance systems

Wire section

|

AWG number

|  | Maximum recommended lenght (in meters)
Cable resistance in 100 meters| 2 Ω| 4 Ω| 8 Ω| 16 Ω
13.3 mm²| 6| 0.25 Ω| 24| 57| 122| 253
6.63 mm²| 8| 0.49 Ω| 12| 28| 61| 126
5.26 mm²| 10| 0.62 Ω| 10| 23| 48| 100
3.31 mm²| 12| 0.99 Ω| 6| 14| 30| 63
2.08 mm²| 14| 1.57 Ω| 4| 9| 19| 40
1.31 mm²| 16| 2.49 Ω| 2| 6| 12| 25
0.82 mm²| 18| 3.98 Ω| 2| 4| 8| 16
0.52 mm²| 20| 6.28 Ω| 1| 2| 5| 10
0.33 mm²| 22| 9.89 Ω| 1| 1| 3| 6

As a guide, please see the following table which outlines the thickness depending on the power and length of the cable.
Bear in mind Ohm ratings on the amplifiers used to power the cabinets. For example, 2-ohm amplifier configurations are not recommended due to the excessive power from the amp output.

Coverage change with the rotatable horn

Many HR cabinets enable the horn to be rotated offering further coverage options. The rotatable horn feature enables the installer to also set the cabinet up horizontally whilst maintaining the horn features such as horizontal and vertical coverage. This is helpful in installs with low ceilings or where esthetically the cabinet looks better horizontally.
The following HR cabinets have rotatable horns:

• HR-1564/7 (60º x 40º)
• HR-1596/7 (90º x 60º)
• HR-1264/7 (60º x 40º)
• HR-1296/7 (90º x 60º)
• HR-1564/5 (60º x 40º)
• HR-1596/5 (90º x 60º)
• HR-1264/5 (60º X 40º)
• HR-1296/5 (90º x 60º)
• HR-208 (90º x 60º)
• HR-108 (90º x 60º)

To turn the horn the user must first remove the cabinet grill, unscrew the horn, rotate it 90º and screw it back in. Just be sure to maintain the connection and put the grill back on.

Mode passive or bi-amp
All the HR cabinets are supplied from the factory in passive mode. To change from passive to bi-amp mode is very simple, you only have to unscrew the connector panel located at the rear of the cabinet and change the cable from the PASSIVE plug to the ACTIVE plug. These plugs are marked on the circuit board.

• Change the cable from one plug to the other and screw the connector panel again. That’s all.
• You will have the cabinet ready in bi-amp mode, with pin ± 1 connected to Low Frequencies and pin ± 2 connected to High Frequencies.

NOTE: The bi-amp mode works without the internal crossover so without its protection for the speakers.

CABINET INSTALLATION

Mounting advice

• The HR cabinets are designed to be used in all kind of fixed installations.
• Cabinets must be installed and suspended by professional installers.
• All responsibility lies with the installation company.
• Never place the safety of personnel at risk.
• Always check the accessories, slings etc are in good condition and the suspension point is secure and free of excess weight, vibration, etc.
• Be careful where the cabinets are suspended from.

Installation accessories
The HR cabinets are designed to be used in installations and the full-range cabinets come with rigging points so that they can be easily installed. To fix the cabinets to a wall or to hold them from the ceiling is very easy using some simple accessories:

HOW TO USE ACCESSORIES FOR INSTALLATION

UBR (U bracket)
UBR is the horizontal mounting system specially designed for Lynx Pro Audio cabinets. It is composed by the U type of support made of steel and 4 special fixing screws (2 per side) to fix the cabinet to the U support.

How to use it?
Before starting with the installation please note that the UBR bracket offers three different options and you have to select one of them before installing the support. Simply check the following drawings and select the best option to achieve the coverage required.

• The angles show the different variations available (from A to B) to fix the center of the cabinet (front grill). Please pay special attention to the optimal positioning of your cabinet.

RAINBOW 3D Acoustic Prediction Software
Lynx Pro Audio’s R&D department is working on Rainbow 3D, a new acoustic simulation software with dynamic 3D features. With a sophisticated design, Rainbow 3D stands out for its speed, being able to provide a simulation in just a few seconds. It also provides algorithms for beam steering and optimizing the listening area.

Designed from scratch by professionals
Rainbow 3D has been programmed from scratch by Lynx Pro Audio engineers, using new programming procedures that achieve an effective simulation with really low calculation time.

Multiple listening zones
The program can simulate all Lynx Pro Audio’s acoustic enclosures located in a 3D space, including the classic side, top and front views. It can also define multiple listening zones and allows offset positioning and symmetry. Blueprint images, textures and PNG format pictures can be imported.

Unlimited sound sources
Allows the acoustic simulation for an unlimited number of sound sources and audio systems. You can place as many systems (subwoofers, line arrays, columns and individual boxes) as you desire. Also, the line arrays can be placed in stack or flown configuration.

Beam steering
Rainbow 3D can add DSP processing to the simulation and uses algorithms to control the directivity (beam steering) in columns, without the need to tilt them physically, being able to divide the column into several beams that point to different zones.

Accurate optimization thanks to FIR filters
Optimized algorithms are used in the listening area to improve the sound coverage and the frequency response. This feature can be executed in a matter of seconds. Additionally, the export of FIR coefficients can be performed with the optimization for later loading in the DSP via Ethernet or a USB device. Shortly direct communication with Lynx Pro Audio and OCS will be available.

Multiple measures and tools
Likewise, the R&D department is developing multiple measurement and analysis tools for the calculated data. For example, the sound pressure curves (SPL) in the listening areas and the capture of virtual measurements that show the frequency response in the points of location indicated and added. Among other tools, you will find auto-play and a wizard to set up different subwoofer arrangements.

HR-6

• Ultra-compact, light and very versatile passive enclosure specially designed for all types of installation projects, both indoors and outdoors (outdoor version available). It consists of a 6.5” transducer (impedance 16 ohm) and a 1” high frequency Mylar tweeter.
• It offers 119 dB SPL (400 W program).
• It is an excellent solution for large installation projects or basic installations. It has a complete range of accessories to provide an easier installation. Although this cabinet can be used without a processor, we strongly recommend that the cabinet presets are applied for maximum optimization and performance.
• For Low-Frequency reinforcement, several subwoofer options are available.

Technical Data

• Components:
  • LF: 1 x 6.5”, 2” voice coil
  • HF: 1 x Tweeter 1” – 1.25” aluminum voice coil, Mylar diaphragm
• Frequency range: 62 Hz – 20 KHz (-10dB)
• Frequency response: 88 Hz – 18 KHz (± 3dB)
• Sensitivity: 93 dB (1W@1m)
• Max SPL / Peak: 116 dB – 122 dB Peak
• Coverage angle: 90º H x 90 º V
• Power: 200 W (400 W program, 800 W peak)
• Crossover: Passive
• Nominal impedance: 16 Ω
• Connectors: 2 x Neutrik Speakon NL4MP / 4 x Terminal Block 7.62 mm between pins
• Finish: Polyurea coating – other colors (RAL) available
• Material: 15 mm premium birch plywood
• Dimensions: 300 x 236 x 220 mm (H x W x D)
• Weight: 7.5 Kg (17 lbs)

Key features

• Ultra-compact
• Versatile sound reinforcement
• High performance
• 90º x 90º wide dispersion
• ARK processor-optimized preset
• Multiple rigging / mounting options

Perfectly suited for

• Club & bar installations
• Sound reinforcement
• Theatres
• Houses of worship
• Multi-media spaces
• Public address

Dimensions

Weather-resistant version

Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.
Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminum logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-108

• Passive ultra-compact, lightweight, and very versatile enclosure specially designed for all types of installation projects.It consists of a 8” transducer with a Neodymium magnet and a 1” high-frequency compression driver.
• It offers 125 dB SPL (600 W program).
• It is an excellent solution for all types of fixed installations and has a complete range of accessories to provide an easier installation. Although this cabinet can be used without a processor, we strongly recommend that the cabinet presets are applied for maximum optimization and performance.
• For Low-Frequency reinforcement, several subwoofer options are available.

Technical Data

• Components:
  • LF: 1 x 8” Neodymium – 2” aluminum voice coil Kapton cone
  • HF: 1” Exit Compression Driver, 1.75” aluminum voice coil, Polyester diaphragm
• Frequency range: 60 Hz – 20 KHz (-10dB)
• Frequency response: 78 Hz – 18 KHz (± 3dB)
• Sensitivity: 97 dB (1W@1m)
• Max SPL / Peak: 122 dB – 128 dB Peak
• Coverage angle: 90º x 90 º rotatable
• Power: 300 W (600 W program, 1200 W peak)
• Crossover: Passive
• Nominal impedance: 8 Ω
• Connectors: 2 x Neutrik Speakon NL4MP / 4 x Terminal Block 7.62 mm between pins
• Finish: Polyurea coating – other colors (RAL) available
• Material: 15 mm premium birch plywood
• Dimensions: 420 x 274 x 298 mm (H x W x D)
• Weight: 10 Kg ( 22 lbs)

Key features

• Ultra-compact
• Versatile sound reinforcement
• High performance
• 90º x 90º wide dispersion
• ARK processor-optimized preset
• Multiple rigging / mounting options

Perfectly suited for

• Club & bar installations
• Sound reinforcement
• Theatres
• Houses of worship
• Multi media spaces
• Public address

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminum logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-1564/7 & HR-1596/7

• High performance, ultra-compact, full range, two-way bi-amp/passive cabinet. It consists of a 15” transducer and a 1.4” high-frequency compression driver.
• They offer 2 dispersion options. The model HR-1564/7 provides a narrow dispersion of 60º x 40º (rotatable) and the model HR1596/7 offers a wide dispersion of 90º x 60º (rotatable). 129dB SPL (1400W program)
• This cabinet is ideal for a wide variety of applications and has a range of accessories that provide an easier assembly. Although this cabinet can be used without a processor, we strongly recommend that the cabinet presets are applied for maximum optimization and performance.
• For Low-Frequency reinforcement, several subwoofer options are available.

Technical Data

• Components:
  • LF: 15”, 3.5” aluminum voice coil, waterproof front side cone treatment, neodymium magnet
  • HF: 1.4” Exit Compression Driver, 2.5” aluminum voice coil, Titanium diaphragm
• Frequency range: 58 Hz – 20 KHz (-10dB)
• Frequency response: 64 Hz – 18 KHz (± 3dB)
• Sensitivity: Passive Mode: 94 dB (1W@1m)
• Max SPL / Peak: Passive Mode: 123dB – 129dB Peak
  • Bi-Amp LF: 126dB – 132dB Peak
  • Bi-Amp HF: 127dB – 133dB Peak
• Coverage angle: Constant directivity horn (Rotatable)
  • 90º x 60º (HR-1596/7) / 60º x 40º (HR-1564/7)
• Power: Passive mode: 700 W (1400 W program, 2800 W peak)
  • Bi- Amp LF: 700 W (1400 W program, 2800 W peak)
  • Bi-Amp HF: 80 W (160 W program, 320W peak)
• Crossover: Bi-amp / Passive (selectable)
• Nominal impedance: 8 Ω Passive / Bi-amp LF 8 Ω, HF 8 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating – other colors (RAL) available
• Material: 15 mm premium birch plywood
• Dimensions: 790 x 444.5 x 541 mm (H x W x D)
• Weight: 32 Kg (70.5 lbs)

Key features

• Versatile sound reinforcement
• High performance
• Coverage 60ºx40º or 90ºx60º, rotatable horns
• ARK processor-optimized preset
• Precise band pass directivity control
• Multiple rigging and mounting options

Perfectly suited for

• Club & bar installations
• Sound reinforcement
• Theatres
• Houses of worship
• Conferences
• Public address

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminum logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-1564/5 & HR-1596/5

• High performance, ultra-compact, full range, two-way bi-amp/passive cabinet. It consists of a 15” transducer and a 1” high-frequency compression driver.
• They offer 2 dispersion options. The model HR-1564/5 provides a narrow dispersion of 60º x 40º (rotatable) and the model HR1596/5 offers a wide dispersion of 90º x 60º (rotatable). 129dB SPL (1000W program).
• This enclosure is ideal for a wide variety of applications and has a range of accessories that provide an easier assembly. Although this cabinet can be used without a processor, we strongly recommend that the cabinet presets are applied for maximum optimization and performance.
• For Low-Frequency reinforcement, several subwoofer options are available.

Technical Data

• Components:
  • LF: 15”, 2.5” voice coil, Malt Cross Cooling System
  • HF: 1.4” Exit Compression Driver, 1.75” aluminum voice coil
• Frequency range: 58 Hz – 20 KHz (-10dB)
• Frequency response: 63 Hz – 18 KHz (± 3dB)
• Sensitivity: Passive Mode: 96 dB (1W@1m)
• Max SPL / Peak: Passive Mode: 123dB – 129dB Peak
  • Bi-Amp LF: 125dB – 131dB Peak
  • Bi-Amp HF: 126dB – 132dB Peak
• Coverage angle: Constant directivity horn (Rotatable)
  • 90º x 60º (HR-1596/5) / 60º x 40º (HR-1564/5)
• Power: Passive mode: 500 W (1000 W program, 2000 W peak)
  • Bi- Amp LF: 500 W (1000 W program, 2000 W peak)
  • Bi-Amp HF: 60 W (120 W program, 240W peak)
• Crossover: Bi-amp / Passive (selectable)
• Nominal impedance: 8 Ω Passive / Bi-amp LF 8 Ω, HF 8 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating – other colors (RAL) available
• Material: 15 mm premium birch plywood
• Dimensions: 790 x 444.5 x 541 mm (H x W x D)
• Weight: 30 Kg (66 lbs)

Key features

• Versatile sound reinforcement
• High performance
• Coverage 60ºx40º or 90ºx60º, rotatable horns
• ARK processor-optimized preset
• Precise band pass directivity control
• Multiple rigging and mounting options

Perfectly suited for

• Club & bar installations
• Sound reinforcement
• Theatres
• Houses of worship
• Conferences
• Public address

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic color paint.

1. Anodized aluminium logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-1264/7 & HR-1296/7

• High performance, ultra-compact, full range, two way bi-amp/passive cabinet. It consists of a 12” transducer and a 1.4” high-frequency compression driver.
• They offer 2 dispersion options. The model HR-1264/7 provides a narrow dispersion of 60º x 40º (rotatable) and the model HR1296/7 offers a wide dispersion of 90º x 60º (rotatable). 129dB SPL (1400W program).
• This cabinet is ideal for a wide variety of applications and has a range of accessories that facilitate its assembly. Although this cabinet can be used without a processor, we strongly recommend that the cabinet presets are applied for maximum optimization and performance.
• For Low-Frequency reinforcement, several subwoofer options are available.

Technical Data

• Components:
  • LF: 12”, 3.5” aluminum voice coil, waterproof front side cone treatment, neodymium magnet
  • HF: 1.4” Exit Compression Driver, 2.5” aluminum voice coil, Titanium diaphragm
• Frequency range: 59 Hz – 20 KHz (-10dB)
• Frequency response: 65 Hz – 18 KHz (± 3dB)
• Sensitivity: Passive Mode: 94 dB (1W@1m)
• Max SPL / Peak: Passive Mode: 123dB – 129dB Peak
  • Bi-Amp LF: 125dB – 131dB Peak
  • Bi-Amp HF: 127dB – 133dB Peak
• Coverage angle: Constant directivity horn (Rotatable)
  • 90º x 60º (HR-1296/7) / 60º x 40º (HR-1264/7)
• Power: Passive mode: 700 W (1400 W program, 2800 W peak)
  • Bi- Amp LF: 700 W (1400 W program, 2800 W peak)
  • Bi-Amp HF: 80 W (160 W program, 320W peak)
• Crossover: Bi-amp / Passive (selectable)
• Nominal impedance: 8 Ω Passive / Bi-amp LF 8 Ω, HF 8 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating – other colors (RAL) available
• Material: 15 mm premium birch plywood
• Dimensions: 705 x 377 x 495 mm (H x W x D)
• Weight: 26 Kg (57 lbs)

Key features

• Versatile sound reinforcement
• High performance
• Coverage 60ºx40º or 90ºx60º, rotatable horns
• ARK processor-optimized preset
• Precise band pass directivity control
• Multiple rigging and mounting options

Perfectly suited for

• Club & bar installations
• Sound reinforcement
• Theatres
• Houses of worship
• Conferences
• Public address

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminum logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-1264/5 & HR-1296/5

• High performance, ultra-compact, full range, two way bi-amp/passive cabinet. It consists of a 12” transducer and a 1” high-frequency compression driver.
• They offer 2 dispersion options. The model HR-1264/5 provides a narrow dispersion of 60º x 40º (rotatable) and the model HR1296/5 offers a wide dispersion of 90º x 60º (rotatable).
• This enclosure is ideal for a wide variety of applications and has a range of accessories that provide an easier assembly. Although this cabinet can be used without a processor, we strongly recommend that the cabinet presets are applied for maximum optimization and performance.
• For Low-Frequency reinforcement, several subwoofer options are available.

Technical Data

• Components:
  • LF: 12”, 2.5” voice coil, Malt Cross Cooling System
  • HF: 1.4” Exit Compression Driver, 1.75” aluminum voice coil
• Frequency range: 60 Hz – 20 KHz (-10dB)
• Frequency response: 65 Hz – 18 KHz (± 3dB)
• Sensitivity: Passive Mode: 94 dB (1W@1m)
• Max SPL / Peak: Passive Mode: 121dB – 127dB Peak
  • Bi-Amp LF: 124dB – 130dB Peak
  • Bi-Amp HF: 126dB – 132dB Peak
• Coverage angle: Constant directivity horn (Rotatable)
  • 90º x 60º (HR-1296/5), 60º x 40º (HR-1264/5)
• Power: Passive mode: 500 W (1000 W program, 2000 W peak)
  • Bi- Amp LF: 500 W (1000 W program, 2000 W peak)
  • Bi-Amp HF: 60 W (120 W program, 240W peak)
• Crossover: Bi-amp / Passive (selectable)
• Nominal impedance: 8 Ω Passive / Bi-amp LF 8 Ω, HF 8 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating – other colors (RAL) available
• Material: 15 mm premium birch plywood
• Dimensions: 705 x 377 x 495 mm (H x W x D)
• Weight: 25 Kg (55 lbs)

Key features

• Versatile sound reinforcement
• High performance
• Coverage 60ºx40º or 90ºx60º, rotatable horns
• ARK processor-optimized preset
• Precise band pass directivity control
• Multiple rigging and mounting options

Perfectly suited for

• Club & bar installations
• Sound reinforcement
• Theatres
• Houses of worship
• Conferences
• Public address

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminium logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-26

• The HR-26 enclosure is a high-performance passive full range, with an excellent power-size ratio. It consists of two 6.5” transducers (at 8ohm impedance) and a 1” high-frequency compression driver. It offers a wide dispersion of 90º x 60º and 122dB SPL (800W program).
• This enclosure offers a selectable operation between bi-amp or passive mode and is ideal for a wide variety of applications and has several accessories that provide an easier installation. Although this cabinet can be used without a processor, we strongly recommend that the cabinet presets are applied for maximum optimization and performance.
• For Low-Frequency reinforcement, several subwoofer options are available.

Technical Data

• Components:
  • LF: 2 x 6.5”, 2” voice coil
  • HF: 1” Exit Compression Driver, 1.75” aluminum voice coil, PM-4 polymer diaphragm
• Frequency range: 72 Hz – 20 KHz (-10dB)
• Frequency response: 78 Hz – 18 KHz (± 3dB)
• Sensitivity: Passive Mode: 90 dB (1W@1m)
• Max SPL / Peak: Passive Mode: 117dB – 122dB Peak
  • Bi-Amp LF: 119dB – 125dB Peak
  • Bi-Amp HF: 125dB – 131dB Peak
• Coverage angle: 80º H x 60 º V Constant directivity horn
• Power: Passive mode: 400 W (800 W program, 1600 W peak)
  • Bi- Amp LF: 400 W (800 W program, 1600 W peak)
  • Bi-Amp HF: 70 W (140 W program, 280W peak)
• Crossover: Bi-amp / Passive (selectable)
• Nominal impedance: 8 Ω – also available in 4 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating, black color
• Material: 15 mm premium birch plywood
• Dimensions: 249 x 568 x 252 mm (H x W x D)
• Weight: 15 Kg (33 lbs)

Key features

• Ultra-compact lightweight
• Versatile sound reinforcement
• High performance
• 80º x 60º wide dispersion
• ARK processor-optimized preset
• Multiple rigging / mounting options

Perfectly suited for

• Club & bar installations
• Sound reinforcement
• Theatres
• Houses of worship
• Multi media spaces
• Public address

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic color paint.

1. Anodized aluminium logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-28

• The HR-28 enclosure is a high-performance passive full range, with an excellent power-size ratio. It consists of two 8” hexacone transducers and a 1” high-frequency compression driver. It offers a wide dispersion of 90º x 60º and 126 dB SPL (1000W program).
• This enclosure offers a selectable operation between bi-amp or passive mode and is ideal for a wide variety of applications and has several accessories that provide an easier installation. Although this cabinet can be used without a processor, we strongly recommend that the cabinet presets are applied for maximum optimization and performance.
• For Low-Frequency reinforcement, several subwoofer options are available.

Technical Data

• Components:
  • LF: 2 x 8”, 2” aluminum voice coil, hexacore cone
  • HF: 1” Exit Compression Driver, 1.75” aluminum voice coil, Polyester diaphragm
• Frequency range: 54 Hz – 20 KHz (-10dB)
• Frequency response: 60 Hz – 18 KHz (± 3dB)
• Sensitivity: Passive Mode: 93 dB (1W@1m)
• Max SPL / Peak: Passive Mode: 120 dB – 126 dB Peak
  • Bi-Amp LF: 120 dB – 126 dB Peak
  • Bi-Amp HF: 125 dB – 131 dB Peak
• Coverage angle: 90º x 60 º (Rotatable)
• Power: Passive mode: 500 W (1000 W program, 2000 W peak)
  • Bi- Amp LF: 500 W (1000 W program, 2000 W peak)
  • Bi-Amp HF: 70 W (140 W program, 280W peak)
• Crossover: Bi-amp / Passive (selectable)
• Nominal impedance: 4 Ω Passive / Biamp LF 4 Ω, HF 8 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating, black color
• Material: 15 mm premium birch plywood
• Dimensions: 665 x 279 x 298 mm (H x W x D)
• Weight: 17 Kg (37 lbs)
• Fittings: 11 x M10 points

Key features

• Ultra-compact lightweight
• Versatile sound reinforcement
• High performance
• 90º x 60º wide dispersion
• ARK processor-optimized preset
• Multiple rigging / mounting options

Perfectly suited for

• Club & bar installations
• Sound reinforcement
• Theatres
• Houses of worship
• Multi media spaces
• Public address

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminum logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-218/36

• The HR218 / 36 is a high-performance passive subwoofer designed to work in conjunction with the full range of the HR series, offering a powerful high power boost between 34 and 200 Hz.
• High power, sub-bass cabinet with dual 18” low-frequency transducers in bass reflex, direct radiation configuration. 145dB SPL (7200W Program).
• This enclosure offers an extraordinary power-volume-weight ratio, being a highly versatile sub-system in all types of installation projects.

Technical Data

• Components:
  • LF: 2 x 18”, 4” tetra coil dual voice coil
• Frequency range: 29 Hz – 200 Hz (-10dB)
• Frequency response: 34 Hz – 200 Hz (± 3dB)
• Sensitivity: 103 dB (1W@1m) π
• Max SPL / Peak: 139 dB – 145 dB Peak
• Coverage angle: Omnidirectional
• Power: 3600 W (7200 W program, 14400 W peak)
• Crossover: Active
• Nominal impedance: 4 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating – other colors (RAL) available
• Material: 18 mm premium birch plywood
• Dimensions: 585 x 1080 x 781 mm (H x W x D)
• Weight: 82 Kg (180 lbs)

Key features

• Incredible size-to-power ratio
• Versatile sound reinforcement
• High performance 3600 W
• ARK processor-optimized preset

Perfectly suited for

• Club & bar installations
• Live sound
• Theatres
• Houses of worship
• Multi media spaces
• Sound reinforcement

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminium logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-218/20

• The HR218/20 is a high-performance passive subwoofer designed to work in conjunction with the full range of the HR series, offering a powerful reinforcement for low frequencies.
• Medium power, subwoofer cabinet with dual 18” low-frequency transducers in bass reflex, direct radiation configuration. 142dB SPL (4000W Program).
• This enclosure offers an excellent power-volume-weight ratio, being a very versatile subwoofer in all types of installation projects.

Technical Data

• Components:
  • LF: 2 x 18”, 3” copper voice coil
• Frequency range: 40 Hz – 200 Hz (-10dB)
• Frequency response: 46 Hz – 200 Hz (± 3dB)
• Sensitivity: 105 dB (1W@1m) π
• Max SPL / Peak: 136 dB – 142 dB Peak
• Coverage angle: Omnidirectional
• Power: 2000 W (4000 W program, 8000 W peak)
• Crossover: Active
• Nominal impedance: 4 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating – other colours (RAL) available
• Material: 18 mm premium birch plywood
• Dimensions: 585 x 1080 x 624 mm (H x W x D
• Weight: 68 Kg (150 lbs)

Key features

• Incredible size-to-power ratio
• Versatile sound reinforcement
• High performance 2000 W
• ARK processor-optimized preset

Perfectly suited for

• Club & bar installations
• Live sound
• Theatres
• Houses of worship
• Multi media spaces
• Sound reinforcement

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminum logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-215S

• The HR-215S is a high-performance compact subwoofer designed to work with the HR range full range cabinets, offering impressive low-frequency reinforcement with an excellent power-volume-to-weight ratio.
• High power, ultra-compact, sub-bass cabinet with two 15” low-frequency transducers with rubber suspension in triple band-pass configuration. 139dB Peak (4000W program).

Technical Data

• Components:
  • LF: 2 x 15” transducers
• Frequency range: 30 Hz – 160 Hz (-10dB)
• Frequency response: 35 Hz – 150 Hz (± 3dB)
• Sensitivity: 100 dB (1W@1m) π
• Max SPL / Peak: 133 dB – 139 dB Peak
• Coverage angle: Quasi omnidirectional
• Power: 2000 W (4000 W program, 8000 W peak)
• Crossover: Active
• Nominal impedance: 4 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating – other colours (RAL) available
• Material: 18 mm premium birch plywood
• Dimensions: 644 x 463 x 600 mm (H x W x D)
• Weight: 59 Kg (130 lbs)

Key features

• Ultra-compact triple band-pass
• Versatile sound reinforcement
• High performance 1200 W
• ARK processor-optimized preset

Perfectly suited for

• Club & bar installations
• Live sound
• Theatres
• Houses of worship
• Multi-media spaces
• Sound reinforcement

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminum logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

HR-18/10

• The HR-18/10 is a compact subwoofer with a great power-volumeweight ratio. This cabinet is designed to work together with the full range units of the HR series, offering significant reinforcement for the low frequencies.
• Medium power, subwoofer cabinet with one 18”low frequency in bass reflex, direct radiation configuration. 135dB SPL (2000W Program).

Technical Data

• Components:
  • LF: 1 x 18”, 3” copper voice coil
• Frequency range: 40 Hz – 200 Hz (-10dB)
• Frequency response: 46 Hz – 200 Hz (± 3dB)
• Sensitivity: 101 dB (1W@1m) π
• Max SPL / Peak: 129 dB – 135 dB Peak
• Coverage angle: Omnidirectional
• Power: 1000 W (2000 W program, 4000 W peak)
• Crossover: Active
• Nominal impedance: 8 Ω
• Connectors: 2 x Neutrik Speakon NL4MP
• Finish: Polyurea coating – other colours (RAL) available
• Material: 18 mm premium birch plywood
• Dimensions: 511 x 505 x 681 mm (H x W x D)
• Weight: 32 Kg (70.5 lbs)

Key features

• Incredible size-to-power ratio
• Versatile sound reinforcement
• High performance 1000 W
• ARK processor-optimized preset

Perfectly suited for

• Club & bar installations
• Sound reinforcement
• Theatres
• Houses of worship
• Multi media spaces
• Public address

Dimensions

Weather-resistant version

• Our Weather-resistant speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.

Colours

• Black polyurea coating with microtextured metal parts.
• RAL available on request. Polyurea coating with aliphatic colour paint.

1. Anodized aluminum logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with a protective layer and micro-textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).

DECLARATION OF CONFORMITY

• Lynx Pro Audio S.L.
• Calle 1 – Pol. Ind. Picassent
• 46220 Picassent (Valencia)
• SPAIN – EU
• Tel.: (+34) 961 10 96 01
• www.lynxproaudio.com

Lynx Pro Audio S.L. declares that HR series conforms with the following EC directives:

• Low Voltage Directive 2014/35/UE
• Electromagnetic Compatibility EMC 2014/30/UE
• RoHS Directive 2011/65/UE
• RAEE (WEEE) 2012/19/UE

In accordance with Harmonized European Norms:

• EN 60065:2014 Audio, video and similar electronic apparatus. Safety requirements
• EN 55032:2012 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and entertainment lighting control apparatus for professional use. Part 1: Emission.
• EN 55103-2:2009 Electromagnetic compatibility. Product family standard for audio, video, audiovisual, and entertainment lighting control apparatus for professional use. Part 2: Immunity.
• EN 50581:2012 Technical documentation for the assessment of electrical and electronic products to the restrictions of hazardous substances.
• HR models: HR-6 HR-108 HR-206 HR-208 HR-1264/5
• HR-1296/5 HR-1264/7 HR-1296/7 HR-1564/5 HR-1596/5
• HR-1564/7 HR-1596/7 HR-215S HR-18/10 HR-218/20
• HR-218/36

LYNX PRO AUDIO GUARANTEE

• Lynx products are guaranteed against every kind of manufacturing fault 3 year after the date of sale. When products are under guarantee, the repairing and the free supplying of the device parts to correct any kind of defect are guaranteed by Lynx Pro
• Audio S.L. In the case that the product could not be returned to the factory for checking and repairing, Lynx Pro Audio S.L. would supply all the necessary parts.
• Lynx Pro Audio S.L. is not responsible for any damage or defect caused during the transport or caused by an undue or improper handling y a non-authorized person during the life of this guarantee.
• All our products undergo rigorous tests and quality controls. We guarantee the characteristics described here within and their quality against any fabrication defect.
• The user loses all warranty rights if he incorporates or carries out any modification to the product if he uses it outside of the stated safe working loads or does not secure the system properly using all the pins in their corresponding holes.
• For any question regarding the product, the user must quote the model and serial number.

WEEE Declaration: Electrical and electronic equipment must be disposed of separately from normal waste at the end of its operational lifetime. Please dispose of this product according to the respective national regulations or contractual agreements. If there are any further questions concerning the disposal of this product please contact Lynx Pro Audio S.L.

www.lynxproaudio.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>