SONOFF CAM-S2 WiFi Smart Security Camera User Manual

SONOFF CAM-S2 WiFi Smart Security Camera

User Manual

Introduction

The CAM Slim Gen2 is a Wi-Fi security camera with 1080P resolution, capable of capturing every detail clearly. It supports real-time viewing of home situations and remote conversations on the app. You can push messages to the app in time by setting motion detection messages, and share them with your family.

• Long press the button for 5 seconds (device emits a “beep” sound): The device enters pairing mode (pairing duration: 30 minutes).

③ Microphone| ⑦ Power input interface (Type-C)
④ TF card slot|

Instruction of LED Indicator Status

button to exit pairing mode).
Keeps on| Online
---|---
Flashes once quickly and lights up strongly at the same time| Device exits the network configuration state after being offline, network exception, or failure to connect to the network.
Flashes twice rapidly| Device detects TF card (device will emit two “beep” sounds).
Flashes once rapidly| Device being watched

Audio Alerts

pairing mode.
Double “beep beep” sounds| Device detects TF card.

Compatible Voice Assistants

Download the eWeLink App

Please download the “eWeLink” app from Google Play Store or Apple App Store.

Scan QR Code to Add Device

Installation

This device can be placed on a desktop (Figure ①), mounted on a wall (Figure ②), or installed on the ceiling (Figure ③).

FCC compliance statement

1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

2.  This device may not cause harmful interference, and

3. This device must accept any interference received, including interference that may
   cause undesired operation.

4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the  eceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement:

The device has been evaluated to meet general RF exposure requirement,This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.

EU Declaration of Conformity

Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type CAM-S2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/

For CE frequency

EU Operating Frequency Range:

• Wi-Fi: 802.11 b/g/n20 2412–2472 MHz, 802.11 n40: 2422-2462 MHz
• BLE: 2402–2480 MHz

EU Output Power:

• Wi-Fi 2.4G≤20dBm
• BLE≤10dBm

WEEE Disposal and Recycling Information

WEEE Disposal and Recycling Information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct  disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
ZIP code: 518000 Service email: support@itead.cc
Website: sonoff.tech Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>