Envision LED 12-24W-5CCT 24W LED 12 Inch Surface Mount Selectable Ceiling Light Instruction Manual
- July 4, 2024
- Envision LED
Table of Contents
Envision LED 12-24W-5CCT 24W LED 12 Inch Surface Mount Selectable Ceiling
Light
Product Information
Specifications:
- Brand: Envision LED Lighting
- Model: 120V Dimmable
- Dimming Range: 10% – 100%
- Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K
Product Usage Instructions
Installation Instructions:
- Installation must comply with local electrical codes and should be done by a certified electrician.
- Ensure the integrated driver is compatible with most regular dimmers (low voltage electronic dimmer recommended).
- Refer to the compatible dimmer list for the best disability.
Before Installation:
Hold the mounting bracket up to the junction box with the flange facing down. Align the breach side of the mounting bracket parallel to the nearest wall and screw the mounting bracket to the J-box.
After Installation:
- Connect the green ground wire from the fixture to the bare copper ground wire from the junction box using a wire nut.
- If house wiring does not include a ground wire, consult your electrical code for approved grounding methods.
- Connect the black fixture wire to the black power supply wire and the white fixture wire to the white power supply wire using wire nuts.
Mounting Instructions:
Attach provided indents to the mounting tabs on the back of the fixture with indents in the mounting bracket.
FAQ
-
Q: Is this product compatible with all dimmer switches?
A: The integrated driver is dimmable with most regular dimmers; however, it is recommended to refer to the compatible dimmer list for best disability. -
Q: What color temperatures are available for this product?
A: This product is available in color temperatures of 2700K, 3000K, 3500K, 4000K, and 5000K.
IMPORTANT SAFETY INSTRUCTIONS
Instructions about a risk of fire, electric shock or injury to others.
WARNING
Installation must be done according to local electrical codes. Installation
should be done by a certified electrician.
The integrated driver is dimmable with most regular dimmers (low voltage
electronic dimmer suggested) For best visibility see the compatible dimmer
list. Dimming range up to: 10% – 100%
Installation Instructions for 120V Dimmable
Instructions Before Installations
WARNING • BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT BREAKER • WARNING
Installation Instructions
-
Hold the mounting bracket up to the junction box with the flange facing down. Align the breach side of the mounting bracket parallel to the nearest wall. Screw mounting bracket to J-box
-
Before connecting, attach to the hook side of the safety cable on the mounting bracket.
-
With Power OFF
Connect the green ground from the fixture to the bare copper ground from the junction box using a wire nut (if house wiring does not include a ground wire, consult your electrical code for approved grounding methods
Use wire nuts to connect the black fixture wire to the black power supply wire and the white fixture wire to the white power supply. -
Attach provided to indents (opening) of the mounting tabs on the back of the fixture with indents in the mounting bracket.
-
Using a sticker on the fixture (reference point for mounting tab) and on the ceiling as a reference point, lift the fixture up to the ceiling and rotate clockwise until the fixture is secured (45˚ turn until it locks).