EnVision LED 5-CCT Backlit Line LED Panels Installation Guide

EnVision LED 5-CCT Backlit Line LED Panels

Product Information

Specifications

• Model: Backlit-Line LED Panels
• CCT: 5-CCT (30/35/40/50/65k)
• Power Selectable: 3 options (20/30/40w, 30/40/50w, 30/40/50w, 45/55/65w, 20/30/40w)
• Voltage: 120/277V
• Lumens: 2600/3900/4400 (20/30/40w), 3900/4400/5500 (30/40/50w), 5625/6875/8125 (45/55/65w)
• Color Rendering Index (CRI): >80

Features

• CCT Selectable-5
• Powder-Coated White Frame
• Unique Back-Lit Design
• Frosted Lens
• Sticky Slim Test Button: Pre-installed test button on the fixture
• Works for Drop Ceiling Flange, Surface Mount Application
• Emergency Backup Integrated Driver

Dimensions

• 1X4: 48″ x 1.5″ x 12″
• 2X2: 24″ x 1.5″ x 24″
• 2X4: 48″ x 1.5″ x 24″

Accessories

• Suspension Kits
  • SK-10FT-Y-LC-CB: 10′ Suspension Kit
  • SK-20FT-Y-LC-CB: 20′ Chain Hanging Kit
  • CK-6FT-V: 6′ Chain Hanging Kit
  • LED-PNL-2X4-SK: 3.5′ Suspension Kit, works for all sizes
• Sensors
  • S-BMS-INT-1: Bi-Level Motion + Daylight Sensor
  • S-PP-BT: Bluetooth Power Pack
  • S-BMS-INT-1-BT: Bluetooth Power Pack with Bi-Level Motion + Daylight Sensor

Contact Information

• EnVision LED Lighting, Inc.
• 6023 Bandini Blvd. | Bell, CA 90040
• Tel.: 323-604-0066
• Website: www.envisionledlighting.com

Rev. 10.23

Product Usage Instructions

Installation

1. Determine the desired location for the LED panel installation.
2. If using a suspension kit, follow the instructions provided with the kit to install the suspension hardware.
3. If surface mounting, ensure the surface is suitable for mounting and use appropriate mounting hardware.
4. Connect the LED panel to the power source using the provided wiring or a certified electrician.

Operation

1. Turn on the power supply to the LED panel.
2. Use the CCT Selectable feature to choose the desired color temperature (30/35/40/50/65k).
3. If applicable, use the Power Selectable feature to adjust the brightness (20/30/40w, 30/40/50w, 30/40/50w, 45/55/65w).
4. The LED panel will provide consistent and uniform lighting.

Maintenance

1. Regularly clean the surface of the LED panel with a soft, lint-free cloth to remove dust and debris.
2. Avoid using harsh chemicals or abrasive materials that may damage the surface or components of the LED panel.
3. If any issues or malfunctions occur, refer to the troubleshooting section of the user manual or contact EnVision LED Lighting for assistance.

FAQ

• Q: Can I customize the color of the LED panel?
  A: Yes, custom colors are available. Please contact EnVision LED Lighting for more information.

• Q: Can I adjust the height of the suspension kits?
  A: Custom height options are available. Please contact EnVision LED Lighting for more information.

• Q: How do I test the LED panel using the pre-installed test button?
  A: Press the test button on the flange of the fixture to check if the LED panel is functioning properly. No external junction box is required for the test switch.

Models

Regular Versions

HL Versions

Specifications

Detail Specifications:

• Finish: White, Custom finishes available
• IP Rating: Damp Location (IP44)
• 5CCT: 30/35/40/50/65K
• Beam Angle: 110°
• Chip: SMD 2835, R9 >50, CRI >80
• Operating Temperature: -40° – 114° F
• Lens: PS (polystyrene) frosted, non-yellowing, & shatter resistant
• Housing: Iron
• Average life (L70) of 50,000 hours

Applications:

• General Indoor Lighting
• Utility & Storage
• Garage Structures
• Office and Meeting Rooms
• Education, Healthcare, Retail, Hospitality
• Commercial and Industrial

Product Information:

• Metal housing finished with corrosion-free powder coat
• Even light distribution
• Lightweight for easier installation
• Select-n-Switch Technology: 5-CCT + 3-Power Selectable

Driver Options:

• UNV: 120-277V 0-10V Dimmable (Dim to Off)
• Optional 347-480V step-down transformer available
• Standard EMB used:
  • 40W: 8W EMB (LED-EMB-8W-HV-0-10V-2P)
  • 50W: 15W EMB (LED-EMB-15W-HV-0-10V-2P)
• Higher wattage emb (up to 25W) is available by request. Pricing will vary.
• THD: <15% (+/-5% tolerance), PF >0.9, 50/60Hz
• Isolated Driver
• Flicker Free

Mounting & Installations:

• Lay-in ceilings for 5/8” and 3/8” ceiling widths
• Built-in earthquake clips
• Optional 9′ suspension kit available
• Optional surface mount, and drywall kit available
• Use a surface mount and suspension kit for an aesthetically pleasing design

Certifications:

• ETL Listed for USA and CA
• DLC Listed/ DLC Premium Listed (HL Versions)
• Approved for CA T24
• 5-Year Limited Warranty
• FCC CFR 47, GCC Part 15, Subpart B:2017

Specs and model numbers are subject to change with or without notice. Customization of products is available.

FEATURES

DIMENSIONS

ACCESSORIES

80
LED-BPL-2X2-3M50-5CCT-HL| 120/277V| 30/40/50w| 3900/4400/5500| 30/35/40/50/65k| >80
LED-BPL-2X4-3M50-5CCT| 120/277V| 30/40/50w| 3900/4400/5500| 30/35/40/50/65k| 80
LED-BPL-2X4-3M65-5CCT-HL| 120/277V| 45/55/65w| 5625/6875/8125| 30/35/40/50/65k| >80
LED-BPL-1X4-3M40-5CCT| 120/277V| 20/30/40w| 2600/3900/4400| 30/35/40/50/65k| 80

SUSPENSION KITS

SENSORS

ENVISION SMART APP)
S-BMS-INT-1-BT| S-BMS-INT-1-BT: Bi Level Motion + Daylight Sensor W/ Bluetooth Control (ENVISION SMART APP)

SURFACE MOUNT KITS

DRYWALL KITS

TRIMS

EnVision LED Lighting, Inc.
6023 Bandini Blvd. | Bell, CA 90040 | Tel.: 323-604-0066 | www.envisionledlighting.com.

References

• Envision Led - Envision LED Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>