dellonda DG276 3 Burner Gas Plancha and Grill BBQ Instruction Manual

: July 4, 2024
: dellonda

dellonda DG276 3 Burner Gas Plancha and Grill BBQ

Specifications

No. of burners: 3
Cooking Area (W x D): Plancha 400 x 340mm, Cooking grid 300 x 280mm
Product Dimensions (W x D x H): 795 x 475 x 215mm
Ignition: Piezo
Nett Weight: 15kg
Power: 8.5kW Plancha (2.5kW per burner), Grill 3.5kW
Product depth (front to back): 47.5cm
Product height (floor to top): 21.5cm
Product width (side to side): 79.5cm

Product Introduction

The Dellonda 3 Burner Gas Plancha/Grill BBQ is a stainless steel barbecue grill with three burners suitable for use in the garden, travel, or camping trips. Plancha cooking offers a low-fat, high-heating method with no flare- ups, making it ideal for various foods such as eggs, pancakes, sausages, salmon, steak, vegetables, and more. The Piezo ignition system ensures safe and easy startup without the need for matches.

Safety Instructions

Ensure to read all safety instructions provided in the manual before using the product. Properly handle the gas regulator and hose assembly. Always use the product in accordance with its intended purpose and follow safe operational requirements.

Usage Instructions

Assembly

Follow the assembly instructions provided in the manual, ensuring all parts are securely attached. Refer to figures for proper positioning of components.

Positioning, Lighting, Usage & Care Information

Place the grill on a stable surface before use. Follow the lighting instructions provided in the manual to ignite the burners safely. Use the grill for cooking various foods and remember to clean it after each use for maintenance.

To Check For Leaks

Prior to usage, check all gas connections for leaks. Follow the instructions in the manual for leak testing procedures.

Storage Of The Appliance

Store the appliance in a cool, dry place when not in use. Ensure it is protected from harsh weather conditions to prolong its lifespan.

Maintenance

Regular maintenance is essential to ensure the product functions properly. Schedule annual servicing with a competent engineer and do not attempt to service the appliance yourself.

Cleaning And Care

After each use, clean the grill following the provided guidelines. Use warm water and mild detergent to clean the surfaces. For persistent issues, contact Dellonda for assistance.

Troubleshooting

Problem	Possible Cause	Solution
Burners will not light	Gas cylinder empty or faulty ignition system	Replace

with a full cylinder or check/replace the ignition
system
Faulty regulator| Have regulator checked or replaced if needed
Obstructions in burner or gas hose| Clean jets and gas hose to remove obstructions

Important Information

Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use.

Specification

No. of burners: 3.
Cooking Area (W x D):Plancha 400 x 340mm. Cooking grid 300 x280mm.
Product Dimensions (W x D x H): 795 x 475 x 215mm. Ignition: Piezo.
Nett Weight 15kg.
Power: 8.5kW Plancha (2.5kW per burner Grill 3.5kW). Product depth (front to back) 47.5cm.
Product dimensions 795 x 475 x 215mm.
Product hight (floor to top) 21.5cm.
Product width (side to side) 79.5cm.

Introduction

Plancha bbq grill with three stainless steel burners. Use in the garden, travel or camping trips. Plancha cooking uses low-fat, high-heating cooking with no flare-ups and is ideal for all kinds of food such as eggs, pancakes, sausages, salmon, steak, vegetables and so much more. Piezo ignition ensures a safe and easy start-up every time, just press the button, no matches needed. Supplied with regulator and hose assembly for use with propane patio gas bottles.

Safety Instructions

GENERAL SAFETY

Read the instructions before using the appliance.
WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
WARNING! Hazardous fire or explosion may result if instructions are ignored.
WARNING! Never use a flame to do the leak test and ensure no naked flames are nearby when doing the leakage test.
WARNING! Accessible parts may be very hot. Keep young children and pets away.
WARNING! If you smell gas: turn off the gas supply at the cylinder, extinguish all naked flames, DO NOT operate any electrical appliances, check for leaks as detailed in this manual. If odour persists, contact Dellonda.
WARNING! Any modification to this appliance may be dangerous and is absolutely not permitted.
WARNING! The hood must always be open when lighting the burner.
Read the instructions carefully before assembly and retain this manual for future reference.
Use outdoors only, stand on a level surface, remember hot fat may drip out of the drip tray.
Handle the hot appliance with the help of oven gloves.
The appliance should be cleaned on a regular basis. Take care not to enlarge burner ports of orifice openings when cleaning the burner or valves.
Connect the regulator and hose onto the gas cylinder, close all the valves by turning the control knobs to the “OFF” (fully clockwise) position.
Always do the gas leak check before you use the barbecue and after a cylinder change. Test the leakage on all the connections where gas passes by.
Parts sealed by the manufacturer shall not be modified by the user.
Use outdoors only.
This appliance must be kept away from flammable materials during use.
DO NOT modify the appliance.
GAS LEAK CHECK Put soapy water on all the connections where the gas reaches. Open the gas cylinder valve and regulator. If bubbles are seen, tighten the connection. If bubbles are still seen, close all valves, turn off the regulator and contact Dellonda for help.
Never use the appliance with a leak.
The gas cylinder can only be changed by a competent person.
Use oven gloves and sturdy long handled barbecue tools when cooking on the appliance.
Be prepared if an accident or fire should occur. Know where your first aid kit and fire extinguishers are and how to use them correctly.
Keep the gas supply hose away from any heated surfaces.
Ensure the appliance has completely cooled before storing.
Cylinders must be stored outdoors, upright and out of reach of children. Protect cylinder from high temperatures and replace the plastic port cap.
This gas appliance is designed for outside use only.
DO NOT use in high winds.
When the regulator is to be used outdoors, it shall be positioned or protected against direct penetration by any trickling water.
DO NOT move the appliance during use.
Turn off the gas supply at the gas cylinder after use.

Regulator And Hose

Only use regulators and hose approved for LPG at the above pressures. The life expectancy of the regulator is estimated as 10 years. It is recommended that the regulator is changed within 10 years of the date of manufacture.
The use of the wrong regulator or hose is unsafe; always check that you have the correct items before operating the appliance.
The hose used must conform to the relevant standard for the country of use. The length of the hose must be 1.5 meters (maximum). Worn or damaged hose must be replaced. Ensure that the hose is not obstructed, kinked, or in contact with any part of the appliance other than at its connection. Change the hose when the national conditions require it.
The hose should not be twisted or kinked when attached to the regulator and outdoor gas appliance.
No part of the hose should touch any part of the appliance. Site the cylinder out to the left hand side of the appliance at the maximum distance permitted by the hose length.

Gas Regulator IGT 27mm Push type
Regulator marked to BS EN 16129 standard
CE UK CA
Regulator cannot be fitted unless in the off position.
Capacity 1.5kg/h Type.A127
Inlet pressure minimum 1 bar maximum.16 bar.
Propane 37mbar ∆ P2=2mbr.
ΔP (Delta P) is a mathematical term symbolizing a change (Δ) in pressure (P).
The downstream installation pressure shall not exceed the ΔP marked on the device.

Assembly

WARNING! Although we take every effort to ensure that the assembly process is as easy as possible, it is inherent with fabricated steel parts that corners and edges can cause cuts if improperly handled during assembly procedures. Be careful while handling any parts during assembly. It is strongly recommended that you protect hands with a pair of work gloves.
Attach the feet to the burner unit (fig.1). Use part 3 under the feet for adjustment if the appliance standing is not flat.(fig.1.3)
Attach burner plate 5 and cooking rack 6 for grilling. (fig.3).
Attach grease tray 8 (fig.5).
Connect the gas hose to the appliance using the clips supplied. Connect the regulator to the hose.
Connect the regulator to the cylinder valve following the regulator instructions supplied with the regulator.
Turn all of the control knobs to the ‘OFF’ position before turning on the gas supply to the appliance.
Operate the regulator in accordance with the instructions supplied with the regulator.

Positioning, Lighting, Usage & Care Information

Ensure the appliance is positioned on a permanent, flat, level, heat resistant non-flammable surface that is capable of safely carrying the weight of the appliance.
Position the appliance away from flammable items.
Ensure the appliance has a minimum of 2m overhead clearance and has a minimum 2m clearance from other surrounding items.
Follow these instructions carefully to avoid seriously damaging your appliance and causing injury to yourself and to property.

To Check For Leaks

Never check for leaks with a naked flame, always use a soapy water solution
Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid with 3 parts water.
Ensure the control valve is “OFF”.
Connect the regulator to the cylinder and connect regulator with hose and outdoor gas grill, ensure the connections are secure then turn ON the gas.
Brush the soapy solution on to the hose and all joints. If bubbles appear you have a leak, which must be rectified before use. Turn off the gas supply in the event of gas leak.
Retest after fixing the fault. Turn OFF the gas at the cylinder after testing.
If detected leakage can not be rectified, do not attempt to cure leakage but consult Dellonda.

Lighting The Burners

Connect the gas cylinder to the appliance following the instructions supplied with the regulator.
Turn all the control knobs to the ‘OFF’ position.
Turn ‘ON’ the gas supply at the cylinder or regulator switch following the regulator connection and operating instructions. Check with the use of soapy water for any gas leakage between the bottle and the regulator and the gas valve. Any leakage will show as bubbles in the area of the leak. If leak is found do not use the appliance. Consult your gas or appliance supplier for advice.
To light the left hand burner, push down the left hand control knob and keep pressing whilst turning anti-clockwise to the “Full rate” position whilst press the ignition button sited between the two knobs up to four times in rapid succession. This will light the left hand burner. If not please repeat this process.
If the burner has not lit after two attempts, turn ‘OFF’ the gas tap and wait 5 minutes before retrying the ignition sequence.
If the burner does not stay alight, please repeat step 4.
When the burner is lit, adjust the heat by turning the knob to the High/Low position.
To light the right hand burner, push down the right hand control knob and keep pressing whilst turning anti-clockwise to the “Full rate” position whilst pressing the ignition button sited between the two knobs up to four times in rapid succession. This will light the right hand burner. If not please repeat this process.
If the burner has not lit after two attempts, turn ‘OFF’ the gas tap and wait 5 minutes before retrying the ignition sequence.
If the burner does not stay alight, please repeat step 8.
When the burner is lit. Adjust the heat by turning the knob to the High/Low position (the operating temperature of this appliance is 0 – 370).
To turn ‘OFF’ the appliance, turn the cylinder valve or regulator switch to the ‘OFF’ position by following the regulator instructions, turn all of the control knobs on the appliance clockwise to the “OFF” position when the flame have extinguished.
WARNING: If any burner fails to ignite, turn the control knob off (clockwise) and also turn the cylinder valve off. Wait five minutes before attempting to relight with ignition sequence.
After use, close the gas supply by either turning ‘OFF’ the switch on the regulator or turning ‘OFF’ the cylinder valve.
In the event of flash back whilst the appliance is in use. Turn all the controls, cylinder valve and regulator switch to the ‘OFF’ position. Wait 5 minutes before attempting to relight the appliance.
If the problem persists after relighting, consult Dellonda, or a qualified gas engineer for assistance or repair. Never try to rectify the problem yourself as this could result in serious injury and/or property damage.

Using The Appliance

Toss vegetables and rub meat with neutral oil. Never add oil directly to the surface of the appliance (it may ignite).
When appliance is very hot (water dropped on appliance will bead), use tongs to add ingredients to appliance in a single layer.

Storage Of The Appliance

Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed from the appliance. When the appliance is not to be used for a period of time it should be stored in its original packaging in a dry dust free environment.
Clean the appliance of excess fat, before storage, with a damp cloth using a mild detergent solution as the cleaning agent.
Store the appliance in a clean dry environment.
DO NOT store your gas cylinder indoors.
Store in a well ventilated area away from direct sunlight.

Gas Cylinder

The appliance can be used with any gas cylinder of weights between 4.5KGS and 15KGS butane and 3.9KGS to 13KGS propane. The gas cylinder should not be dropped or handled roughly. If the appliance is not in use, the cylinder must be disconnected. Replace the protective cap on the cylinder after disconnecting the cylinder from the appliance.
Cylinders must be stored outdoors in an upright position and out of the reach of children. The cylinder must never be stored where temperatures can reach over 50° C. Do not store the cylinder near flames, pilot lights or other sources of ignition. DO NOT SMOKE.
The cylinder should be changed away from any source of ignition.

Maintenance

In normal conditions of use, in order to ensure correct operation of the installation it is recommended that this device is changed within 10 years of the date of manufacture.

Cleaning And Care

• DO NOT open the grease tray during use.
• CAUTION: All cleaning and maintenance should be carried out when the barbecue is cool and with the fuel supply turned OFF at the gas cylinder. We would recommend that this gas grill should be serviced by your localgas retail outlet at least once a year by a competent engineer. Do not attempt to service this appliance yourself.

Cleaning

COOKING SURFACE

Clean the appliance while it is still hot. Soak several paper towels with water, and roll them up together like a cigar. Using a pair of tongs to hold paper towels, rub surface of appliance to remove residue. Let appliance and grill cool before removing appliance.
Use a mild soapy water solution. Non-abrasive scouring powder can be used on stubborn stains then rinse with water.

OUTSIDE SURFACE

Use mild detergent or baking soda and hot water solution. Non-abrasive scouring powder can be used on stubborn stains, then rinse with water.

NEVER USE OVEN CLEANER

PLASTIC SURFACES

Wash with a soft cloth and hot soapy water solution. Rinse with water. DO NOT use abrasive cleaners, degreasers or a concentrated barbecue cleaner on plastic parts.

GREASE TRAY

DO NOT open the grease tray during use.
When clean the grease tray, take away the grease cup first then pull out the grease tray.
Please check the grease cup regularly and clear the grease when 1/3 full.
To remove the grease tray carefully lift the tray straight up before pulling it sideways out of the appliance.
Let the fat cool before attempting to clean the grease tray.

CLEANING THE BURNER ASSEMBLY

Turn the gas OFF at the control knob and disconnect the cylinder.
Remove hot plate.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with a new burner.
Reinstall the burner, check to ensure that the Gas valve orifices are correctly positioned and secured inside the burner inlet (venturi).
In some cases your barbeque will light back because of an insect crawling inside the burner venturi or a spider spinning its web inside the burner. This can be rectified by using a bottle brush inserted through the burner venturi and pushing it into the burner over the burner length. If condition persists consult Dellonda.