STERLING 6505-39 Finesse Framed Pivot Shower Door Owner’s Manual
- July 4, 2024
- STERLING
Table of Contents
STERLING 6505-39 Finesse Framed Pivot Shower Door
Product Information
The FinesseTM Framed Pivot Shower Door 6505-39 is a high-quality shower door designed for durability and style. It meets ANSI Z97.1, CAN/CGSB-12.1, and CPSC 16CFR 1201 standards for safety and performance.
Specifications:
- Product: FinesseTM Framed Pivot Shower Door 6505-39
- Dimensions: Min 36-1/2″ (927 mm), Max 39-1/2″ (1003 mm) width
- Height: 65-1/2″ (1664 mm)
- Threshold: 11/16″ (17 mm)
- Base-To-Wall: 1/2″ (13 mm)
- Shower Ledge Min: 2-1/8″ (54 mm)
- Shower Wall Min: 1-1/2″ (38 mm)
Installation:
- Refer to the installation guide provided with the product for detailed instructions.
- Ensure a minimum vertical opening of 66″ (1676 mm) for proper installation clearance.
- Follow the specified dimensions for base-to-wall, shower ledge, and shower wall to ensure a secure installation.
FAQ
Q: Where can I find detailed warranty information?
A: Visit the manufacturer's website or contact customer service at 18007837546 for detailed warranty information.
Q: Can I customize the glass options for this shower door?
A: Yes, the FinesseTM Framed Pivot Shower Door 6505-39 offers customizable glass options. Refer to the available glass options and codes provided.
Q: Are there any specific codes or standards this product complies with?
A: This product meets ANSI Z97.1, CAN/CGSB-12.1, and CPSC 16CFR 1201 standards for safety and quality.
Features
- Framed, 1/8″ (3 mm) thick tempered glass
- Exterior towel bar
- Tempered glass ensures enhanced safety and durability
Material
- Anodized aluminium prevents rust and corrosion
Installation
- Out-of-plumb adjustability simplifies installation
- Not for use in hospitality
- For residential use only
Codes/Standards
- ANSI Z97.1
- CAN/CGSB-12.1
- CPSC 16CFR 1201
Available Glass Options
Code Description
- Rain
Dimension
Limited Warranty
STERLING® Bath and Shower Doors Five-Year Limited Warranty
See the website for detailed warranty information
www.sterlingplumbing.com.
Technical Information
All product dimensions are nominal.
- Base-To-Wall Radius – Max: 1/2″ (13 mm)
- Shower Ledge Min Flat: 2-1/8″ (54 mm)
- Shower Wall Min Flat: 1-1/2″ (38 mm)
Notes
- Install this product according to the installation guide.
- The vertical opening should be a minimum of 66″ (1676 mm) to allow for installation clearance.
Contact Information
- 1-800-STERLING (1-800-783-7546)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.sterlingplumbing.com.
- 3-22-2024 22:31 – US
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>