ROVIN SL3516 Solar Powered Multicoloured String Light Instruction Manual

SL3516
Solar Powered
Multicoloured
String Light

INSTRUCTION MANUAL

WARNINGS & SAFETY INFORMATION

WARNING: The manufacturer is not responsible for any potential injury from misuse
WARNING: Risk of Electric Shock. (Avoid making connections or disconnections when the equipment is wet. Do not Submerse. Keep lamps at least 16 feet from pools and spas. Keep receptacles dry).
WARNING: When using outdoors basic safety precautions should always be followed to reduce the risk of fire,electric shock and personal injury.
Install in accordance with these instructions and current electrical codes such as the National Electric Code(NEC). When used outdoors in Wet Locations,Ground Fault Circuit Interrupter protection(GFCI) is to be provided on the circuits or outlets. The receptacle cover should always be in place to prevent the entry of water (unless a plug is inserted).

• Light sockets must be installed base on so that bulbs are facing down only.
• Not intended for installation in ceilings, sofa, cabinets or other enclosed spaces.
• Keep bulbs from combustible material. Do NOT allow lamps or sockets to come into contact with fabrics associated with shades, blinds or other materials. The bulbs is at least 3 inches away from the nearest object.
• Do not cluster the bulbs.
• Disconnect power at source prior to wiring, restart or servicing in any way.

BOX CONTENTS

REMOTE CONTROL

Strobe: One color serves as the main color for most bulbs, while another color appears randomly among the remaining bulbs. Press the button to change colors; there are a total of 6 programs. The programs feature mainly red and sky blue in the remaining bulbs, mainly green and purple in the remaining bulbs, mainly blue and yellow in the remaining bulbs, mainly yellow and blue in the remaining bulbs, mainly sky blue and red in the remaining bulbs, and mainly purple and green in the remaining bulbs, in that order.
Fade: The string light will change colors one by one every few seconds. The program includes the colors red, orange, yellow, green, sky blue, dark blue, purple, and pink, in that order. There are a total of 8 colors in this program.
Twinkle: The string light will flash single colour 3 times as 1 round. 3 rounds will change into the next colour. The colours are white, purple, sky blue, yellow, dark blue, green and red in order. Totally 7 colours.
Breath: The string light will change colors one by one every few seconds. The program includes the colors red, orange, yellow, green, sky blue, dark blue, purple, and pink, in that order. There are a total of 8 colors in this program.
Chaser: Several colors appear simultaneously, resembling a snake that flashes forward. Press the button to change to other color combinations. There are a total of 6 programs, with 3 programs featuring a single-color chase in red, green, and dark blue, respectively. The remaining 3 programs involve different color chases, with sequences including sky blue, red, purple, green, red, yellow, green, purple, white, and sky blue, in that order.
Random: lt will changes the colour randomly.
RGBW Flash: One color serves as the main color and flashes regularly across all bulbs. Press the button to change the color. There are 7 available colors: red, green, dark blue, yellow, purple, sky blue, and white, in that order.
Voice: The string light responds to voice or music, automatically flashing in sync with the sound.
NOTE: When you are playing single colour light, you can press the speed button to adjust the brightness. When you are playing the program functional buttons like Strobe Fade etc. You can press the speed button to adjust the frequency of flashes or voice and music. To meet your requirements for the speed or brightness of all buttons.

INSTALLATION INSTRUCTIONS

Using a Guide wire with S-hooks or Zip ties (not included)

Installation

1. Screw existing lamps by holding the socket in one hand and twisting the lamp clockwise. Lamps may be tight in the sockets.
   WARNING: The bulbs must only be used with the string unit, never in other sockets, and no mains powered bulbs to be used with the string

2.  Screw the bulb into the socket clockwise until top of the socket forms a tight seal around the bulb and the bulb makes solid contact with the socket.
   

SPECIFICATIONS

Lights

for different application scenarios
Control Distance| 8-10 Meters
Input /Output Voltage| 3.7V/5V
Outdoor /Indoor use| Yes
Cable Colour| Black

Solar Panel

WARRANTY INFORMATION

Our product is guaranteed to be free from manufacturing defects for a period of 12 Months.
If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for intended purpose.
This warranty will not cover modified product; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure.
To claim warranty, please contact the place of purchase. You will need to show receipt or other proof of purchase. Additional information may be required to process your claim.
Any expenses relating to the return of your product to the store will normally have to be paid by you.
The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law in relation to the goods or services to which this warranty relates.

This warranty is provided by:
Electus Distribution
Address 46 Eastern Creek Drive, Eastern Creek NSW 2766
Ph. 1300 738 555

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>