Homeline 392215 TV Wall Mount Instruction Manual

Homeline 392215 TV Wall Mount

Specifications

• Compatible TV Sizes: 75x75mm/3×3 to 200x200mm/8×8
• Maximum TV Weight: 44 LBS (20 KG)
• Installation Surface: 0.5(12.7mm) thick or above wooden board

Product Usage Instructions

Check Compatibility:
Ensure your TV is within the specified VESA sizes and weight limits mentioned above.

Gather Installation Tools:

• 2M Band Tape
• Pencil
• Screwdriver
• Electrodrill
• Socket Wrench 5/32(4mm) 1/2(13mm) Wood Drill Bit

Safety Precautions:
Read the instruction manual carefully before installation. Ensure the wall can support the weight of the TV and mount. Only use the hardware on the specified wooden board.

Assembly:
Follow the step-by-step assembly instructions provided in the manual, including disassembling the wall plate unit, choosing the configuration, selecting TV screws, attaching the TV plate to the TV back, and installing the wall plate securely.

Wall Plate Installation:
Ensure all lag bolts are firmly tightened to prevent unwanted movement of the wall plate assembly. Perform a wall plate installation integrity test before hanging the TV.

FAQ

• What should I do if my TV does not meet the VESA size requirements?
  If your TV does not fall within the specified VESA size range, this mount is not compatible with your TV.

• Can I install this mount on a surface other than a wooden board?
  No, this mount is designed for installation on a 0.5(12.7mm) thick or above wooden board.

• What is the maximum weight capacity for this mount?
  The maximum weight capacity for this mount is 44 LBS (20 KG).

Before getting started, let’s make sure this mount is perfect for you!

1. Before getting started, let’s make sure this mount is perfect for you!

2. Does your TV (including accessories) weigh less than 44 LBS (20 KG)?

3. Where can you install this mount?

4. Installation Tools (Not Included)

5. Safety Caution
   Please read this instruction carefully before installation.

   • The hardware provided in the package can only use in 0.5″ thick or above wooden board installation on RV.
   • The wall must be capable of supporting five times the weight of the TV and mount combined. According to the wall you’re going to install, the structure of your RV may require additional reinforcement.
   • Do not apply this product to any purpose not indicated by Mounting Dream.
   • Make sure to stow the TV and fully lock the mount in place before your RV is moving.
   • Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.

ASSEMBLY INSTRUCTION

• STEP 1 Attach TV Plate To TV
  Parts and Hardware
  WARNING:This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. NOTE: Not all hardware included will be used.

1. Disassemble Wall Plate Unit into Two Pieces
2. Choose Configuration
3. Select TV Screws
4. Need Spacer?
  1. No, go to PAGE 4 I for detailed combination.
  2. Yes, go to PAGE 4 II for detailed combination.
5. Attach TV Plate to TV Back
  1. Screw and washer
  2. Spacer(s), screw and washer  

Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to remove the inner circle.

• STEP 2 Attach Wall Plate To Wall****  

CAUTION:

  * To avoid potential personal injury or property damage:
  * All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
  * To prevent the TV falling down, the Bolt Head Must Keep UP at this step!!

• STEP 3 Hang And Secure TV To Wall Plate
  Before hanging TV, please conduct “wall plate installation integrity test” first.

• STEP 4 Adjustment

1.  **Tilting angle adjustment (+5°/-15°)：**  

Loosen handle and tilting bolt, adjust TV to your desired position, then tighten handle and tilting bolt.

2.  **TV leveling adjustment (±5°):**  

Loosen 2 leveling bolts on the rear of TV plate by maximum 2 turns, adjust to level, and retighten to secure.

• STEP 5 Lock TV In Place/Unlock

  • Lock
    Push your TV to the wall. Pull down the strap and lock the TV plate to the wall plate.
    Important ! Make sure to stow the TV and fully lock the mount in place before your RV moves.

  • Unlock****  

PRODUCT DIMENSION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>