Zelus V20240401 Outdoor Adjustable Basketball System User Manual

Zelus V20240401 Outdoor Adjustable Basketball System

Specifications

• Height Range: Adjustable
• Height Graduation: Not specified
• Backboard Dimensions: Not specified
• Hoop Diameter : Not specified
• Telescopic Upper Rod Dimensions: Not specified
• Telescopic Middle Rod Dimensions: Not specified
• Telescopic Lower Rod Dimensions: Not specified
• Backboard Bracket Inner Lifting Rod: Not specified
• Outer Lifting Rod : Not specified
• Base Dimensions: Not specified
• Water Capacity: Not specified

Product Usage Instructions

Installing the Base

1. Choose a flat, dry surface for installation and final placement.
2. Assemble the parts according to the provided diagram.
3. Screw the telescopic lower rod (L) to the base as shown.
4. Apply the long pole braces (I) and short pole braces (R) to the base using provided locknuts.
5. Feed the wheel pin (Q) through one side of the base to the other, pivoting the wheels (H).

Installing the Backboard and Rim

1. Hook the net (C) to the rim (B) as shown.
2. Place the backboard on a solid surface.
3. Align the holes of the rim with those on the backboard and secure them with provided nuts.

Installing the Backboard Brace
Attach the big springs to the bracket and bolt as shown.

Installing the Lifting Rod
Follow the assembly instructions provided in the manual to install the lifting rod.

Filling in Sand or Water
You can fill the base with either sand or water to provide stability. Follow the instructions provided in the manual.

Adjustment

1. To adjust the height of the rim, hold the lever and push the handle up or down.
2. Release the lever when the rim is adjusted to the desired height.

Maintenance
Regularly check all parts for wear and tear. Contact customer support for any maintenance needs.

FAQ

• Can I adjust the height of the basketball system?
  Yes, you can adjust the height of the rim by following the adjustment instructions provided in the manual.

• What should I fill the base with, sand or water?
  You can fill the base with either sand or water based on your preference for stability.

• How do I contact customer support?
  You can contact customer support at contact@b2csupport.com for any questions or assistance.

Safety Information

WARNING
Read these instructions carefully before use and keep them for future reference. Provide them to anyone who will use this product and provide them with this product if it is ever given or sold to a third party. Failure to follow these instructions may lead to serious property damage and severe personal injury.

• ALWAYS check that the lever on the handle can lock the rim at a fixed height. If not, cease use and mark the system “Out of Order”. Do not resume use until the problem is fixed.
• ONLY use this product for recreation and fitness, but not for fierce competition.
• NEVER dunk on or jump and yank at the hoop. The backboard WILL fall.
• ONLY use this system in the backyard or any space contained and protected from road traffic and unauthorized use.
• Check the system every time before use. Check all fasteners and the base for any sign of leakage. Refrain from use if any are found. Only resume use after all problems have been fixed.
• Fill the base with water or sand of the correct amount after installation to prevent the backboard from collapsing.
• Place the base on a level ground.
• Keep the base away from sharp edges.
• DO NOT lie around the basketball hoop.
• DO NOT allow use by children, or by persons whose mental or physical condition precludes safe use.
• DO NOT use while under the influence of alcohol, drugs, or any medication that negatively affects your judgment or reflexes.
• Keep children and bystanders away during installation.
• ONLY transfer the system with it lying on the vehicle or dolly.
• Drain the base when the temperature is lower than 0°C to avoid damage to the base.
• ONLY fill the base with sand when the temperature is lower than 0°C.
• Protect the metal parts from the element if to be used outdoors.
• Follow the rules of playing basketball. Seek training if needed.
• Keep your fingers away from the moving parts when adjusting the height.
• Adjust the basketball rim to the lowest level before moving.
• Avoid friction with the ground while moving.
• ONLY LET PROFESSIONALS INSTALL THIS PRODUCT.

Specifications

Parts List

Main Parts

N
O| Short Backboard Braces| 2
P
Q| Wheel Pin| 1
R| Short Pole Braces| 2

Fastener Package

Note: Match bolts, washers, nuts and springs according to their labels.

Assembly

WARNING

• ALWAYS use personal protective equipment (PPE) suitable to your task. Always wear ANSI and OSHA-approved eye, breathing, and hand protection while installing this product.
• Other equipment such as ear, head, and body protection are also necessary depending on your work, work environment, and other equipment.
• Dress properly for assembly. Do not wear loose clothing or jewelry and keep hair, clothing, gloves, hoses, and tools away from any moving parts during assembly.
• DO NOT overreach. Keep proper footing and balance at all times.
• In case of an accident or injury, have a first aid kit and a communication device (e.g., a phone) readily available. Know the location of emergency medical facilities.
• Although the wrenches are provided, it is recommended to use an electric drill and sockets to ensure complete tightness.
• Three people are needed for assembling and adjusting.
• ONLY LET PROFESSIONALS INSTALL THIS PRODUCT.

Installing the Base

1. Choose a flat, dry surface for installation and final placement.

2. Turn the base (A) over and screw a M8×45 mm bolt through a washer into the hole of the base.

3. Screw the telescopic lower rod (L) to the base as shown.

4. Apply the long pole braces (I) and short pole braces (R) to the base using provided 4 M8×20 mm screws, 8 washers, and 4 locknuts.

5. Fix the four pole braces to the lower rod using an M10×100 mm bolt, 2 washers, and a nut.

6. Feed the wheel pin (Q) from one side of the base to the other, pivoting the wheels (H).

7. Attach the triangular pad (E) to the long pole braces using 4 M8×45 mm bolts, washers, and nuts.

8. Insert the tapered part of the telescopic middle rod (J) into the telescopic lower rod (L) and align the holes of the two rods and fix them with the provided M10×85 mm bolt, washer, and nut.

Installing the Backboard and Rim

1. Hook the net (C) to the rim (B) as shown.

2. Put the backboard on a solid wooden box.

3. Align the holes of the rim and those on the backboard bracket, and fix them with 2 M8×45 mm bolts, washers, and nuts.

4. Arrange the bowl washers, M8×120 mm bolts, and small springs as shown.

5. Insert them into the remaining 2 holes on the rim from the rim side of the backboard and tighten them using 2 M8 nuts.

Installing the Backboard Brace

1. Insert the M12×160 mm bolt and a washer into the hole of one of the short backboard braces (H) and put an M12 washer on the bolt.
   Note: Pay attention to the position of the hole.

2. Fix the two short backboard braces to the bracket using 2 M12 washers and a nut through the Ø16×70 mm bushing as shown.
   Note:

   • 2 M12 washers must be between the short backboard brace and the bracket.
   • To avoid wear to the backboard braces, 2 washers need to be added between the bolt and the short backward brace.

3. Repeat steps 1–2 to install the long backboard brace (J) using the M12×160 mm bolt, 4 M12 washers, and a nut. and a Ø16×70 m
   Note: Pay attention to the position of the hole.

4. Pass the M10×160 mm bolt through the middle holes of the two short backboard braces, and use an M10 nut to lock it.

5. Hook the ends of the big springs onto the bracket and the other ends on the M10 bolt as shown.

6. Fix the telescopic upper rod (K) to the link bracket (F) using an M10×85 mm bolt, washer, and nut as shown.

7. Attach the upper rod to the backboard braces using 2 M12×160 mm bolts, 8 M12 washers, and 2 nuts.
   Note: Place the washer at the location indicated by the arrow.

Installing the Lifting Rod

1. Connect the top end of the outer lifting rod (G) to the end of the long backboard using the M12×160mm bolt.
   Note: The Ø20×12 mm bushings must be between the long backboard brace and the outer lifting rod.

2. Attach the triangular bracket to the middle rod using 2 M8×80 mm bolts, washers, and nuts.
   WARNING

   • Support the system as shown for the final assembly step and adjustment.
   • At least three people are needed.

3. Lean the basketball hoop on a ladder or similar object.

4. With the help of more than two people, connect the upper part of the system to the lower part.

5. Secure the upper rod into and middle rod using an M10×85 bolt, washer, and nut.

6. Attach the lifting rod to the triangular bracket using an M8×45 mm bolt, washer, and nut.

Filling in Sand or Water
WARNING
Two people are needed to hold the basketball stand while water or sand is being added.
Note:
If the product does not need to be moved frequently, sand is better than water, because water freezes when the temperature drops below 0°C and it may damage the base. However, if removing the sand is needed, disassemble the base from the system first.

1. Secure the system with the help of at least two people.
2. Open the cover of the base and fill it with sand or water.
3. Stop when the required amount has been filled.

Note:

• The amount may vary.
• Stop when maximum stability is reached.
• It is recommended to use a funnel to add water or sand.

Adjustment

To adjust the height of the rim,

1. Hold the lever and push the handle up or down.

2. Release the lever when the rim is adjusted to your desired height.
   Note:

   • Adjust the rim to the lowest level before moving.
   • Move to the right place then raise the rim slowly.

Maintenance

• Check all parts of the basketball system regularly, including the rim, net, backboard, rods, and base. Look for signs of wear, rust, or damage.
• Periodically check and tighten all fasteners to ensure stability.
• If used outdoors, protect metal parts from the elements. Applying silicone spray or light oil to exposed metal parts. If rust does appear, sand it off gently and apply a rust-resistant paint.
• Keep the backboard clean. For acrylic or polycarbonate backboards, avoid abrasive cleaners.
• Check the water or sand level regularly to ensure the required amount is maintained. Drain the water before freezing temperatures to prevent the base from cracking.
• If not to be used for a long time, drain the water and store in a dry and cool place.

Contact Us

• Thank you for choosing our products! If you have any questions or comments, contact us at contact@b2csupport.com and we’ll resolve your issue ASAP!
• For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>