MIGHTY BRIGHT BrightFlex Rechargeable LED Light User Guide
- May 15, 2024
- MIGHTY BRIGHT
Table of Contents
MIGHTY BRIGHT BrightFlex Rechargeable LED Light
Product Information
Specifications
- Product Name : BrightFlex Rechargeable LED Light
- Power Switch : 3 dimming levels
- Features : Audience light shield, Detachable clip, Screw-on light connector
- Charging Port : Micro USB
- Battery Capacity : 2500 mAh
Product Usage Instructions
Powering On/Off and Adjusting Brightness
To power on the BrightFlex Rechargeable LED Light, locate the power switch and press it. The light has 3 dimming levels that can be adjusted by toggling the power switch.
Attaching/Detaching Clip
To attach the detachable clip, align it with the designated slot on the light and slide it until it clicks into place. To detach the clip, gently press the release button and slide the clip off.
Charging the Light
Locate the Micro USB charging port on the light and connect it to a power source using a compatible cable. The battery bank has capacity of 2500 mAh, ensuring long-lasting illumination.
Using the Audience Light Shield
The audience light shield helps direct light towards your intended target without causing glare or distractions. Adjust the shield as needed to focus the light beam.
Replacing Light Connector
If you need to replace the light connector, unscrew the existing connector and securely screw on the new one to ensure proper connection and functionality.
FAQ
- Q: How do I know when the battery is low?
- A : The LED light will indicate a low battery by flashing or dimming. Make sure to recharge the light promptly.
- Q: Can I use any Micro USB cable for charging?
- A : It is recommended to use the provided Micro USB cable or a certified compatible one to ensure safe and efficient charging.
- Q: Is the light suitable for outdoor use?
- A: The BrightFlex Rechargeable LED Light is designed for indoor use. Avoid exposing it to moisture or extreme weather conditions.
Read all instructions prior to using your new product.
USING YOUR BRIGHTFLEX RECHARGEABLE LED LIGHT:
- If the blue LED battery indicators are not illuminated, “wake up” the battery bank by pressing the battery bank button on the side of the battery bank opposite of the clip. Blue LED lights will illuminate to show the current battery level.
- Once “awake”, turn on the light by pressing the power switch located on the top of the light head. Press it again to begin cycling through the three light levels (90 | 45 | 20 Lumens, and off).
- Your BrightFlex Rechargeable LED light uses energy-efficient LEDs that will never need to be replaced.
- The BrightFlex is powered by an included 2500 mAh rechargeable battery.
- The battery fully charges in 3.5 hours (using the included 4-meter micro USB charging cable,) providing 8, 15, or 25 hours of illumination, depending on the brightness level being used.
- The light head can be removed, and be powered by any USB port, including laptops, other battery banks, etc.
- When the light head is removed, the battery bank can be used to charge small electronics like cell phones or tablets (the charging percentage will vary based on the capacity of the battery within your particular device). Ensure the battery bank is awake to charge.
- The clip can be removed from the battery bank to reduce the overall size (ideal for travel or when on the go).
- The rechargeable battery is FAA-compliant and can travel inside an airline cabin. Never put rechargeable batteries in checked luggage.
SAFETY INFORMATION
- This product is not a toy and is not intended for children under 13 years of age. Do not stare directly into the LEDs or shine them into the eyes of others. Do not attempt to remove or replace the LEDs.
- Improper use of this or any other battery-operated product may cause batteries to leak or explode, which may result in chemical burns and/or personal injury.
If any amount of battery leakage comes in contact, directly or indirectly, with skin, eyes, inside of mouth, or anywhere on the body: 1) immediately flush the affected area with plenty of cool, running water (do not use hot water). 2) Contact your local doctor, Poison Control Center, or hospital emergency room, or call the 24-hour National Button Battery Ingestion
Hotline at : 1-202-625-3333, which accepts collect calls from both the US and Canada.
Also, give the hotline number to your doctor or hospital emergency room. If injury appears serious, call: 911.
CUSTOMER SERVICE:
For questions and assistance please contact us at:
- 800.922.3233
- customerservice@mightybright.com
Visit us at:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>