OPTICON OPN-2006 Small Compact Barcode Scanner User Manual

• Bar Code Sample : Optoelectronics Test Chart, N/W ratio = 1:2.5
• Angle : ± = 0° ² = 15° ³ = 0°
• Curvature : R =

Pitch, Skew, and Tilt

• Pitch : ± ≦ ±35°
• Skew : ² ≦ ±50° (Excluding dead zone)
• Dead Zone : ² ≦ ±8 ° (Decoding may fail in some areas as a result of specular reflection)
• Tilt : ³ ≦ ±20°

Conditions

• Bar Code Sample Optoelectronics Test Sample

• Distance 110 mm from the edge of the OPN-2006
  <Pitch, Skew and Dead Zone>
  PCS 0.9, Resolution 0.25 mm, 9-digit Code 39,
  Quiet Zone 10 mm, N/W Ratio = 1 : 2.5
  PCS 0.9, Resolution 0.5 mm, 3-digit Code 39, Quiet Zone 15 mm

• Angle:  Pitch and Tilt angles calculated with Skew angle ² = +15° Skew angle / Dead zone: ± = 0°, ³ = 0°

• Curvature: R = •

Figure 4: Pitch

Figure 5: Skew

Figure 6: Tilt

Curvature

With 8-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R ≧ 15 mm
With 13-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R ≧ 20 mm

Conditions

• Bar Code Sample Optoelectronics Test Sample
  PCS 0.9, Resolution 0.26 mm, Quiet Zone 10 mm

• Distance 110 mm from the edge of the scanner

• Angle Skew angle ² = +15

Figure 7: Curvature

Interface Specifications

USB

Settings

The interface is full-speed USB.

Cable

Dedicated cable with PC connector is provided.

Connector

Mini USB B connector

Figure 8: USB B connector

Interface Circuit

Figure 9: Interface circuit

Bluetooth

Module

The OPN-2006 is equipped with a low power fully certified Bluetooth module.

Specifications

Bluetooth standard: 3
High speed UART interface
Supported profiles: SPP (serial port profile) and HID (keyboard emulation)

Product Label

The label shown below is attached to the back of the OPN-2006.

Figure 10: Product & Laser Caution Label

Packaging Specifications

Individual Packaging Specification

Assembled package size: 125 x 112 x 40 (WDH mm)

Figure 11: Individual Packaging

Collective Packaging Specification

A: Barcode serial label for shipment box stick this label  on a side of the box that is visible when the box is placed on a pallet.

B : Missing serial number label
Attach this label when there are more than 3 labels of which serial numbers are out of order ( not in a correct sequence).

Durability

Ambient Light Immunity

Scanning performance is guaranteed when the barcode surface is illuminated as follows.

• Incandescent light : 0 ~ 4,000 lx
• Fluorescent light : 0 ~ 4,000 lx (excluding high-frequency
• lighting) Sunlight : 0 ~ 80,000 lx

< Conditions>

• Barcode Test Sample: OPTOELECTRONICS test chart
  PCS = 0.9, Resolution 0.25 mm, 9-digit Code 39, Quiet
  Zone 10 mm, N/W Ratio = 1:2.5

• Distance 100 mm from the front edge of the
  scanner. Angles Pitch: ± = 0°, Skew: ² = 15°, Tilt: ³ = 0°

• Curvature R = •

• Power Voltage 3.7 V

Be sure that direct light or specular reflection does not enter the light receiving section of the OPN-2006.

Vibration Strength (without packing)

There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in the non-operating state. Repeat this in each X, Y and Z direction.

Vibration Strength (in individual packing)

There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in the individual packaged state. Repeat this in each X, Y and Z direction.

Drop Impact Strength (without packaging)

There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner 3 times (18 times in total), at each 6 face, from a height of 150 cm onto a concrete floor as shown below.

Electrostatic Discharge Immunity

• Air discharge: 8 kV Max. (No malfunction)
  15 kV Max. (No destruction)

• Contact discharge: 4 kV Max. (No malfunction) [Discharged from the frame of the USB connector.] 10 kV Max. (No destruction)

• Measurement environment: Use electrostatic testing device compliant with IEC 61000-4-2

• Discharge resistance: 330 ©

• Capacitor charging: 150 pF

MTBF

MTBF (Mean Time Between Failures) 30,000 hours (excluding the following parts)
Laser diode : 10,000 hours
Mirror scan unit : 10,000 hours

Regulatory Compliance

Laser Safety

IEC 60825-1 Ed.2: 2007 Class 2
CDRH ClassⅡ

EMC

EN55022
EN55024
FCC Part 15 Subpart B Class B

This device complies with part 15 of the FCC Rules. Operation is subject To the following two conditions: ( 1 ) this device may not cause harmful Interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation.

VCCI Class B

This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.

RoHS

The OPN-2006 is compliant with RoHS.

RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95/EC

Precautions

Precaution against Laser Light

*Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Caution

Do not stare into the laser light from a scanning window. It may harm your eyes.
Do not point the laser directly at others’ eyes. It may harm your eyes.
Do not stare into the beam with optical instruments. It may harm your eyes

Handling

Handle this product carefully. Do not deliberately subject it to any of the following:

Shock

• Do not drop this product from a height greater than specified in this manual.
• Do not place this product under or between any heavy items.
• Do not swing this product around holding the hand strap.

Temperature Conditions:

• Do not use this product at temperatures outside the specified range.
• Do not pour boiling water on this product.
• Do not throw this product into a fire.

Foreign Materials:

• Do not immerse this product in water or other liquid.
• Do not expose this product to chemicals.

Others

• Do not disassemble this product.

• Do not use this product near a radio or a TV. It may cause reception problems.

• This product may be affected by a momentary voltage drop caused by lightning.

• This product may not perform properly in a place where it will be subjected to a flickering light, such as a CRT (computer monitor, television, etc.).

• This specification manual is subject to change without prior notice.

Appendix 1: Mechanical Drawing

Figure 14: Mechanical Drawing

All information subject to change without notice.

Document History

Model Number: OPN-2006
Edition: 1.0
Date: 2014-02-16
Specification Number: P1402160
Original Spec Number: –

Copyright 2014 Opticon. All rights reserved.

This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.

Limited Warranty and Disclaimers

PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT.

Serial Number

A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty.

Warranty

Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages.

Packaging

The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty.

Trademarks

Trademarks used are the property of their respective owners.

Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd.,
12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002.
TEL +81-(0) 48-446-1183;
FAX +81-(0) 48- 446-1184

SUPPORT

USA

Phone: 800-636-0090
Email: support@opticonusa.com
Web: www.opticonusa.com

Europe

Email: support@opticon.com
Web: http://www.opticon.com/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>