ASUS AAS01 Ergo Monitor Arm User Guide
- July 3, 2024
- Asus
Table of Contents
ASUS AAS01 Ergo Monitor Arm
Specifications
- Model: ROG ERGO MONITOR ARM (AAS01)
- Dimensions:
- Arm at max extension: 100.00mm (3.94″)
- Arm in full up position: 200.00mm (7.87″)
- Monitor mount: 295.00mm (11.61″)
- Range of motion: 320mm (12.60″)
- Weight capacity:
- For tilt adjustment: 3~11.5Kg (6.6~25.3lbs)
- For lift strength adjustment: 3~8.5Kg (6.6~18.7lbs)
Product Usage Instructions
Safety Information
Ensure the monitor arm is properly assembled and mounted to avoid personal
injuries or equipment damages.
Installation and Assembly
- Mount and assemble all components before adjusting the position, rotation, and tilt of the monitor arm.
- Ensure smooth movement through the full range of motion; the arm should stay in place once set.
- Double-check adjustments if movement is not smooth.
Desk Placement Options
Choose between desk clamp options based on the thickness of your desk
surface.
Tilt and Lift Strength Adjustment
- Increase Tilt: If equipment is too heavy and doesn’t stay raised, increase tilt.
- Decrease Tilt: If equipment is too light and doesn’t stay lowered, decrease tilt.
- Increase Lift Strength: Adjust lift strength for heavier equipment that doesn’t stay raised.
- Decrease Lift Strength: Adjust lift strength for lighter equipment that doesn’t stay lowered.
Friction Adjustment
- Increase Friction: Tighten to increase friction if the arm moves too easily.
- Decrease Friction: Loosen to decrease friction if the arm is difficult to move.
Frequently Asked Questions (FAQ)
-
Q: How do I prevent damage or injuries when using the monitor arm?
A: Follow all safety instructions, ensure proper assembly, and adjust settings according to the weight of your equipment. -
Q: What should I do if the monitor arm does not stay in position?
A: Adjust the tilt, lift strength, or friction based on whether the equipment is too heavy or too light.
ROG ERGO MONITOR ARM (AAS01)
USER GUIDE
https://www.asus.com
Copyright © ASUSTeK Computer Inc. All Rights Reserved
Package contents
Safety Information
- Ensure to mount and assemble all the components before adjusting the position, rotation, and tilt of your monitor arm. Movement should be smooth and easy through the full range of motion and the monitor arm should stay in place once set. If this is not the case, double check that you have followed the adjustment instructions.
- Whenever equipment is added or removed from your monitor arm, leading to a change in the weight of the mounted load, repeat the adjustments steps to ensure safe and optimal operation.
- Ensure your mounting surface is strong and wide enough to support the monitor arm and mounted equipment.
- Ensure the connected cables have sufficient slack to accommodate the full range of motion.
- Ensure the connected cables are properly routed to avoid cable pinching. Cable pinching may cause damages to the monitor arm or personal injuries.
- DO NOT exceed the listed maximum weight capacity as this may cause damages to the monitor arm and mounted equipment or personal injuries.
WARNING
DO NOT remove mounted equipment from the monitor arm unless the monitor arm
has been moved to the highest position. The monitor arm may rapidly move
upwards when mounted equipment is removed, due to tension in the arm
mechanism. This may cause severe personal injuries and damages to the
equipment.
Dimensions
Arm in full up position
Top view of Arm
Desk clamp
Range of motion
IMPORTANT! Ensure to mount and assemble all the components before adjusting the position, rotation, and tilt of your monitor arm. Movement should be smooth and easy through the full range of motion and the monitor arm should stay in place once set. If this is not the case, double check that you have followed the adjustment instructions.
Desk placement options
Installation and assembly
CAUTION! DO NOT overtighten or remove the screw, doing so may cause damage to the monitor arm.
NOTE: Ensure
the lift strength is adjusted according to the weight of your monitor.
CAUTION!
- DO NOT overtighten the screw, doing so may cause damage to the monitor arm.
- DO NOT exceed the listed maximum weight capacity as this may cause damage to the monitor arm and mounted equipment or personal injuries
CAUTION! DO
NOT remove the screw, doing so may cause damage to the monitor arm.
NOTE
- Ensure the connected cables have sufficient slack to accommodate the full range of motion.
- To remove or route cable through the cable organizer, gently pry open the cable organizer (tip of the arrow in the illustration above).
CAUTION! Ensure the connected cables are properly routed to avoid cable pinching. Cable pinching may cause damages to the monitor arm or personal injuries.
Product specifications
| Model | AAS01 |
|---|
Recommended Display Size
| ≤34”
* Display size is an approximation.
** Dimension is the diagonal measurement of the display.
*** The display size may be exceeded as long as the weight of the display does not exceed the maximum weight capacity of the mount.
Weight Capacity
| Flat display| 3Kg ~ 11.5Kg (6.6lbs ~ 25.3lbs)
Curved display| 3Kg ~ 8.5 Kg (6.6lbs ~ 18.7lbs)
* Due to the difference in weight distribution between flat and curved display, the applicable size range of curved displays is smaller.
Lift| 32cm (12.6”)
Tilt Swivel
Pivot
| +80° ~ -25°
+90° ~ -90°
360°
Pan
Rotation
| 360°
360°
Maximum Height
Maximum Extension
| 49.97cm (19.67”)
63.72cm (25.08”)
Physical Dimension (W x L x H)
Box Dimension (W x L x H)
| 57.8cm x 65.6cm x 15.4cm (22.76” x 25.83” x 6.06”)
77.5cm x 13.5cm x 23.2cm (30.51” x 5.31” x 9.13”)
Net Weight| 4.5Kg (9.9lbs)
Gross Weight
Desk Clamp Range
| 5.8Kg (12.8lbs)
10mm ~ 80mm (0.39” ~ 3.15”)
VESA Wall Mounting| 100mm x 100mm (3.94” x 3.94”)
Product serial number
Please provide the product serial number when contacting customer service.
Refer to the illustration below for the location of the product serial number.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>