PHILIPS Ultinon Pro7000 SI Car and Truck Signaling Bulb Owner’s Manual

Owner’s Manual

Ultinon Pro7000 SI Car and Truck Signaling Bulb

Philips Ultinon Pro7000 SI
Car and truck signaling
bulb
LED-WHITE [≈P21W] Number of bulbs: 2
12/24V, 6000 K Cool White
Advanced automotive system

LUM11498CU70X2

Enjoy lasting brightness for a safer drive.

Brighter, elegant signals
For a stylish and safe drive, upgrade to Philips Ultinon Pro7000 LED-WHITE [≈P21W] for your turn indicator, reverse, rear fog and stop lights. Their cool white color looks great and increases visibility so you can signal safely and stylish.

Superior visibility for safer driving

• Signal your intent with brighter exterior lighting
• Instant safety information for other drivers
• Ergonomic design with 360° beam pattern

High-end, stylish signaling

• Upgrade your lights, upgrade your style.

Performance made to last

• Enhanced lifetime of up to 5,000 hours
• Aluminum heatsink to dissipate heat more efficiently

Simple plug-and-play replacement

• Easy to install and compatible with most car models
• Constant IC driver ensures electrical compatibility with mos
• Easy to install on your car

Car and truck signaling bulb
LED-WHITE [≈P21W] Number of bulbs: 2, 12/24V, 6000 K Cool White, Advanced automotive system

Highlights

Powerful brightness
Signaling the intended movement of your vehicle is vital to your safety. To avoid collisions, other people need to know what you’re doing. And when poor weather reduces visibility, the need for bright and vibrant signaling becomes even greater. Philips Ultinon Pro7000 LED signaling lights provide powerful brightness with 15 LEDs for your signals. They will help you to see and be seen better, warning other drivers of your movements, which is vital for them to react sooner. The more you see and are seen, the safer your drive will be!

Instant-on technology
Compared to incandescent lamps, Philips Ultinon Pro7000 LEDs light up instantly to ensure that other drivers can react faster, keeping you safer.

Uniform light distribution
For your turn indicator, reverse, rear fog and stop signals, the Philips Ultinon Pro7000 LED gives you uniform light distribution. Its 360 angle ensures that the light is projected where you need it. Not only can you see more of the road, but other drivers can also see more of you.

Elegant LED light
While the main goal of exterior lighting is to help you see and be seen, there’s no reason why you shouldn’t look good at the same time. If you’re wanting to upgrade your style without buying a newer car, replacing your exterior lighting with Philips Ultinon Pro7000 LED signals is a smart way to spend your money.

Lifetime of up to 5,000 hours
You want bright, stylish car lights but you dont want to keep replacing failed lamps. That’s a major weakness of conventional bulbs – the more powerful the light, the shorter its lifespan. Even at a higher light intensity, LEDs last much longer. Philips Ultinon Pro7000 LED lights are built to last. Due to features such as high-end LED technology and advanced heatmanagement systems, they last for up to 5,000 hours of operation.

Super-robust lamps with aluminum material
When operating, LEDs generate heat which reduces their brightness and overall lifespan. Philips Ultinon Pro7000 LED lights feature an aluminum heatsink which dissipates heat much faster than the plastic material used by low-cost, inferior-quality bulbs. That makes our lamps more robust and longerlasting.

Ready, steady, installed!
Enjoy the plug-and-play experience: Philips Ultinon Pro7000 LED lights use the same standard caps as the conventional lamps on your car, enabling you to upgrade with no modification needed, so replacement is easy and quick.

Electrical compatibility with most cars and trucks
LED retrofit and conventional bulbs differ from one another in terms of wattage, composition, and power consumption. Replacing your conventional bulbs with other LEDs may prove problematic. Thanks to the built-in constant IC driver, Philips Ultinon Pro7000 bulbs can work within 9-32 volt systems and are electrically compatible with most cars and trucks. Canbus adapters are available as accessories for troubleshooting if needed. We sell a complete solution.

Polarity-free design
Enjoy the plug-and-play experience: the Philips Ultinon Pro7000 comes with polarity-free design, so you don’t need to worry about the polarity during installation. It will save you time and make installation easier.

Marketing specifications

• Product highlight: Polarity-free, Automotive Grade LED, Powerful brightness, Uniform light distribution
• Expected benefits: Brighter, elegant signals

Product description

• Application: Reverse lights, rear and front turn indicators, stop lights, rear fog lights.
• Base: BA15S
• Designation: P21W LED White 11498 CU70 12/ 24V X2
• Homologation ECE: NO
• Range: Ultinon Pro7000 SI
• Technology: LED
• Type: LED-WHITE [≈P21W]
• Voltage: 12V+24V V

Lifetime

• Life time: 5000 hrs

Light characteristics

• Lumens: 340lm(12V), 420lm(24V) lm
• Color temperature: 6000 K

Electrical characteristics

• Wattage: 2.6W(12V), 3.3W(24V) W
• Voltage: 12V+24V V

Ordering information

• Order entry: 11498CU70X2
• Ordering code: 72677930

Packaging Data

• EAN1: 6974260726779
• EAN3: 6974260726786
• Packaging type: X2

Packed product information

• Length: 7,0 cm cm
• Width: 2,5 cm cm
• Height: 11,5 cm cm
• Pack Quantity: 2 pcs
• MOQ (for professionals): 10 packs
• Gross weight per piece [g]: 40

Outerpack information

• Length: 19,5 cm cm
• Width: 15,5 cm cm
• Height: 8,5 cm cm
• Gross weight [kg]: 0,46

Issue date 2024-04-05
Version: 3.3.1
EAN: 69 74260 72677 9

© 2024 Koninklijke Philips N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V. or their respective owners.
www.philips.com

• Non-ECE compliant

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>