elna 5-7mm Straight Stitch Foot Instructions
- July 2, 2024
- Elna
Table of Contents
elna 5-7mm Straight Stitch Foot Instructions
Product Information
This sewing machine model is designed for straight stitch sewing on fabric widths of 5-7mm. It is ideal for working with delicate fabrics due to its precise stitching capabilities.
Specifications
- Stitch Type: Straight stitch (Center needle position)
- Thread Tension: Auto or 3 – 6
- Stitch Length: 1.5 – 4
- Stitch Width: 0
Product Usage Instructions
- Place the fabric under the presser foot, aligning it with the seam guideline on the needle plate.
- Select the straight stitch setting with the central needle position on the machine.
- Adjust the thread tension to auto or between 3 – 6 based on your fabric type and thickness.
- Set the stitch length between 1.5 – 4 to achieve the desired stitch appearance.
- Ensure the stitch width is set to 0 for straight stitching.
- Gently guide the fabric along the seam guide line, letting it feed naturally as you sew.
STRAIGHT STITCH for 5-7mm models
Ref: 200-331-021
Gently guide the fabric along the seam guideline on the needle plate, letting
the fabric feed naturally. Often used for delicate fabrics.
Note: Select only the straight stitch with a central needle position.
Machine Settings
- Stitch: Straight stitch (Center needle position)
- Thread tension: “Auto” or 3 – 6
- Stitch length: 1.5 – 4
- Stitch width : 0
FAQ
Q: What should I do if the stitches are too loose or too tight?
A: If the stitches are too loose, increase the thread tension. If they are too tight, decrease the tension slightly. Test on a scrap fabric before sewing on your project.
Q: Can I use this machine for thick fabrics?
A: While this machine is best suited for delicate fabrics, you can sew on thicker fabrics by adjusting the thread tension and stitch length accordingly. It is recommended to test on a scrap piece first.