CERIHA 600W Portable Power Station User Manual

: June 14, 2024
: CERIHA

Table of Contents

600W Portable Power Station
**** SAFETY PRECAUTIONS
INCLUDED ITEMS:
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
BUTTON OPERATIONS
TROUBLESHOOTING
SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Portable Power Station
600W Portable Power Station
User Manual

600W Portable Power Station

**** SAFETY PRECAUTIONS

DANGER- WARNING Read and understand ail safety information before using this product. Failure to follow these instructions may result in electric shock, explosion, fire which can lead to serious injury, death or property damage.

Read all instructions before using the product.
Do not get your Portable Power Station wet or store in extreme temperature conditions.
Do not disassemble or attempt to repair your Portable Power Station yourself.
Use a cloth to clean the exterior of your Portable Power Station. Do not use liquid detergent or chemicals of any kind.
When used correctly, LiFePO4 rechargeable batteries provide a safe and dependable source of portable power. However, if they are causing personal injury or damage to other devices.
Misusing or incorrectly connecting your Portable Power Station may cause electric shock to users and damage equipment.
Keep your Portable Power Station dry and away from moisture and corrosive materials. The Portable Power Station should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
Do not expose your Portable Power Station to moisture, water, rain, or snow.
Keep your Portable Power Station away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that product heat.
The LiFePO4 rechargeable battery used in this charging device may present a risk of fire or chemical burn if mistreated, Do not expose to fire or excessive temperature. Do not expose to heat above 212°F (100°C) or incinerate.
Your Portable Power Station may become warm under extended high power operation. Do not cover, wrap, or otherwise restrict the Portable Power Station during operation.
In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher.
Do not disassemble your Portable Power Station. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.
Do not drop or subject to strong impacts. Do not operate your Portable Power Station if it has received a sharp blow, or has otherwise been damaged in any way.
Do not puncture, crush or subject to mechanical shock.
The Portable Power Station, along with its accessories, are not toys and should be kept away from children.
Do not insert any foreign object into the ports or openings of your Portable Power Station.
Do not clean your Portable Power Station with harsh chemicals, soaps or detergents. Just wipe the case with a soft cloth.
Do not modify or attempt to repair the Portable Power Station except as indicated in the instructions for use and care.
Make sure the Portable Power Station charging ports do not become contaminated with lint or other debris.
Batteries should be recycled or disposed of as per state and local guidelines.
The device shall be stored indoors and protected from the elements;
When in use, steps should be taken to prevent the exposure to rain, sleet, snow, and the like.
For appliance and battery storage, do not exceed 104°F (40°C)
Do not operate in explosive atmospheres such as in the presence of fammable liquids, gases or dust.

SAVE THESE INSTRUCTIONS.

INCLUDED ITEMS:

Portable Power Station
Wall Charging Adapter
AC Cable

LOCATION OF CONTROLS

Input Power LED
DC Input
DC ON/OFF Button
12V DC Power Socket
12V DC 5525 Output Ports
Collapsible Handle
LCD Screen ON/OFF Button
LCD Screen
USB Output ON/OFF Button
USB-A Output Ports
USB-C PD Input/Output Port
AC Output ON/OFF Button
230V AC Output Ports
Floodlight ON/OFF Button
Floodlight
Wall Charging Adapter
AC Cable

OPERATING INSTRUCTIONS

Please make sure to fully charge the Portable Power Station be first use.
CHARGING THE Portable Power Station
Using the Wall Charging Adapter:
Use the provided Wall Charging Adapter, and plug the adapt the DC charge input. Next, connect the Wall Charging Adapter i wall outlet. The Portable Power Station will automatically beg charging. When the Portable Power Station is fully charged, all battery indicator lights will be solid green and the LCD digital displ will indicate 100%. When fully charged, disconnect the cable
NOTE:

For optional or dual charging, The Portable Power Station can also be charged via the USB-C PD port with a USB-C charging adap (not included).
The Portable Power Station can also be charged via solar panel (not included) and car charger (not included).
The Portable Power Station can be charged and discharged simultaneously.

BUTTON OPERATIONS

LCD Button:

To turn on/off the LCD display, simply press the LCD button. The LCD display will automatically turn off after 15 seconds if nothing is connected to the output ports.
OC ON/OFF Button:
To turn ON, press DC ON/OFF Button. The DC Indicator will lig the LCD Screen will turn on. To turn OFF, press the DC ON/OFF But
NOTE:

The Type C port in/out will not be controlled by the ON/OFF button.

AC ON/OFF Button:
To turn ON, press the AC ON/OFF Button. The AC Indicator will light up and the LCD Screen will turn on. To turn OFF, press the AC ON/OFF Button.
Note: To preserve the battery , turn off the DC, USB and AC outputs when the product is notin use.
CONNECTING YOUR ELECTRONIC DEVICES, EQUIPMENT AND APPLIANCES
The Portable Power Station is compatible with AC and DC electronic devices, equipment and appliances where portable, stationary, or emergency power is required. CERIHA 600W Portable Power Station - parts2 There are several ways to power and charge electronic devices with the Portable Power Station. Both AC and DC Output Ports can be used simultaneously.
Using the 230V AC Output Ports:
The Portable Power Station can be used to power your 220-240V AC electronic devices, equipment and appliances rated for 600 Watts or less. To begin, connect the AC power plug from your device/equipment/appliance into the AC Output Port of the Portable Power Station, then press the AC ON/OFF Button.
NOTE:

+ Make sure the AC Power Plug is fully plugged into the AC Output Port.

The Portable Power Station will provide up to 1000 Watts peak power for 5 seconds.

Using the USB Ports:
The Portable Power Station is compatible with the USB charging cable provided with your electronic device. To begin, press the DC ON/OFF Button, then plug the standard USB end of the cable into any of the 5V/2.4A USB Output Ports. Connect the tip into the input of your electronic device to begin charging. For PD (Power Delivery) Output, use a USB-C to USB-C cable (not included) to charge your compatible electronic devices.
USB Smart Charge Technology
Your Portable Power Station contains the USB SMART CHARGE TECHNOLOGY to achieve higher compatibility for charging USB electronic devices. The USB SMART CHARGE TECHNOLOGY will allow the Portable Power Station to communicate with your electronic device and provide the fastest and safest charge for that device.
Using the 12V DC Power Socket and 5525 Output Ports
The Portable Power Station can be used to power your 12V DC electronic devices, equipment and appliances. To begin, press the DC ON/OFF Button, then connect your 12V compatible device/equipment/appliance into the Power Socket or 5525 Output Port(s).
USING YOUR Portable Power Station FLOODLIGHT
Press the Floodlight ON/OFF Button once to turn ON.
Press the Floodlight ON/OFF Button twice to turn 50% brightness.
Press the Floodlight ON/OFF Button three times to turn 100% brightness.
Press the Floodlight ON/OFF Button four times to turn OFF.
Double Click the Floodlight ON/OFF button to turn on SOS mode light.
Press the button again to turn off SOS mode light.

TROUBLESHOOTING

If the Portable Power Station cannot charge or power devices, please check the following steps:

Make sure the Power ON/OFF Button is ON.
Make sure the AC and DC Power Buttons are ON and confirm the LED buttons are green.
Check the battery capacity. If it is lower than 3%, please recharge the Portable Power Station.
Make sure the power consumption does not exceed the rated power of the port.
If an error code is observed, refer to the Error Code Chart on the next page.
Do not operate the Portable Power Station outside the allowable operating temperature. (-10-40°C)

Error Codes:

| Input Overvoltage Protection: The symbol will flash for 5 seconds when an input over voltage condition is detected.
---|---
| Output Overload Protection: The symbol will flash for 5 seconds when an AC output overload condition is detected.
| Low Power Alarm:The symbol will flash when the power station batter capacity is less than 3%.
| Low Temperature Alarm: This low temperature symbol will be displayed if the power station is attempted to be used outside the allowable operating temperature.
| High Temperature Alarm: This high temperature symbol will be displayed if the power station is attempted to be used outside the allowable operating temperature.

SPECIFICATIONS

Output

CHARGING

Here are some common devices and their power requirements for each charging port: CERIHA 600W Portable Power Station - parts3 * Usage is estimation only
RECHARGING
Before using or storage.plug your Power Station CP1000W into the wall plug until it is fully charged. If the LCD shows less than 20% capacity, plug it into a power source, like an AC outlet or a solar panel, as soon as possible.
There are four ways to recharge your Power Station:
*DC 552.5mm Input**

| Wall Charger (120W)
Around 7 Hours
---|---
| Car Charger (120W)
Around 7 Hours
| 200W Solar Panels(Optional)
Around 10 Hours
(Depending on Weather)

Type C Input
Type C Wall Charger ( PD 100W)
Around 15 Hours
DC input and Type C input Simultaneously (220W)
Around 5 hours

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>