NAVAC NX1 Nexus Digital Manifold Gauge User Guide
- September 18, 2024
- NAVAC
Table of Contents
NAVAC NX1 Nexus Digital Manifold Gauge
Empowering you to work smarter
Step 1: Link NX1 with Temperature Probe
- To pair the low-side temperature probe, press and hold for 3 seconds.
- To pair the high-side t,fil!lll,erature probe, press and hold for 3 seconds.
- NST1 Successfully Connected
- NST2 Successfully Connected
Step 2: Link NX1 with Vacuum Gauge
To pair the vacuum gauge, click “Mode” button to switch NX1 to Evacuation Mode, then press and hold for 3 seconds.
NMV1 S Successfully Connected
Step 3: Link NX1 with myNAVAC APP
Note: If you are using NX1 with a vacuum gauge and temperature probes, follow step one and two before connecting the NX1 to the APP.
- Turn on your mobile device’s Bluetooth.
- Scan QR code or search for “myNAVAC” in the APP market and install the APP.
- Register and login to access full APP features.
| |
---|---|---
- On the Device page, tap the plus button in the lower right corner to search available devices.
- Find the NX1, and click the plus button in the upper right corner to link NX1 with myNAVAC APP.
- Click the NX1 icon to enter the tool interface to explore various functionalities including pressure, temperature, and vacuum reading, Record, Device Description, and Test Reports.
CUSTOMER SUPPORT
NAVAC Inc.
www.NavacGlobal.com
Tel/Fax:+ 1 877 MY-NAVAC
877 696 2822
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>