anko 42959540 Gaming Microphone Pack Instruction Manual
- June 7, 2024
- Anko
Table of Contents
Instruction Manual
42959540
Gaming Microphone Pack
Please read the instruction manual carefully before operation.
Product Diagram
- Microphone Stand
- Table Clamp
- POP Filter
- Microphone
- Microphone Clip
- USB Audio Cable
- Mic Windscreen
(1)Step 1, Check the accessory list.
| |
---|---|---
(2)Step 2,Fix the clamp on the edge of the table| (3)Step 3, Insert the foot
base (black)of the
adjustable microphone stand into the table clamp| (4)Step 4, Tighten the screw
| |
(5)Step 5, Screw the shock mount
onto the threaded end of the
adjustable microphone stand| (6)Step 6, Insert the microphone
into the microphone clip| (7)Step 7, Fix the pop filter on the
adjustable microphone stand to
complete the assembly.
(8)Step 8, Connect the microphone with your computer,prepare wired headphones to hear the voices from the microphone
Specifications
| Polar Pattern | cardioid |
|---|---|
| Sensitivity | -42±3dB (1.5V. 6801(0; OdB-1V/Pa. 1KHz) |
| Frequency Response | 100Hz-18000Hz |
| Impedance | <6800 |
| S/N Ratio | >58dB |
| Max SPL | 125d8 |
| Sampling Rate | 192KHZ/24Bit |
| Operation voltage | DC5V.800mA |
Packaging Contents:
1 x USB Condenser Microphone
1 x Table Clamp
1 x Microphone Stand
1 x Microphone Clip
1 x Windscreen
1 x Pop Filter
1× Audio cable
1× User Guide
General operation cont
To manually adjust your input level via your computer’s system preferences,
use the following instructions relevant to your device platform/operating
system.
Adjusting the input level on a Mac OS computer:
-
Click on the Apple symbol at the top left of your screen, and select System Preferences.
Accessing Mac OS System Preferences -
Click on ‘Sound’ to open the sound options.
Opening ‘Sound’ options -
Open the ‘Input tab’.
-
From here, select the ‘2-USB Audio LCS’ from the list of devices, and adjust the input level using the slider.
Adjusting the input level on a Windows computer:
-
Open the Start menu and click on ‘Control Panel’
Accessing Windows Control Panel -
Open the ‘Sound’ preferences from within the Control Panel folder.
-
Open the ‘Recording’ tab and double click on ‘2-USB Audio LCS’ from the list of devices
Selecting the 2-USB Audio LCS input device -
Adjust the input level using the slider.
Adjusting input level