Myko 12000 BTU Air Conditioner User Guide
- July 3, 2024
- Myko
Table of Contents
Myko 12000 BTU Air Conditioner
Specifications
- Brand: Myko
- Compatible Devices: Connected Home Air Conditioner 12000 & 9000 BTU
- Features: Onboarding via QR Code, Temperature Control, Fan
Speed Control, Sleep Mode, Swing Mode, Timer Function, Dehumidify Controls, Troubleshooting
Adding a Product to the Myko App
To add the Air-Conditioner to the Myko app:
- Refer to the Onboarding Products – Myko Support Guide for detailed instructions.
- Locate the QR code on the product or within the Quick Start Guide.
- Scan the QR code using the Myko app for onboarding.
Product Controls Screen
After successfully adding the Air-Conditioner to your Myko account:
- Tap the Air-Conditioner entry on the Myko Home screen to access the product Controls screen.
- Use the Mode menu to select between Heating and Cooling modes.
Myko Support Guide: Air Conditioner
This guide explains how to use features and functions specific to Myko- compatible Air-Conditioner
Terminology
- Myko – this is the brand name for the products, app, and service to enable smart products.
- “Onboarding” means the process of adding a product to a user’s account.
- QR Code – this is a 2D barcode that is imprinted on the product and the quick start guide and scanned by the Myko app to identify and onboard the product.
Applicable Devices
This document applies to the following products: Connected Home Air
Conditioner 12000 & 9000 BTU
Adding a Product to the Myko App
Please refer to the “Onboarding Products -Myko Support Guide” for instructions
on adding a product to the Myko app (“onboarding”). In the section below you
will find the locations of the Air ConditionerQR code, which is needed for
onboarding.
QR Code Locations
- The QR code is printed on the product
- Or within the Quick Start Guide included in the packaging.
Product Controls Screen
Once the Air-Conditioner has been successfully added to the Myko account, tap
the Air-Conditioner entry on the Myko Home screen to open the product Controls
screen. Tap the Mode menu at the top to select a mode:
- Heating – Tap to control heating (If applicable. Some models only support cooling.)
- Dehumidify – Tap to control dehumidifier
- Cooling – Tap to control cooling
- Fan – Tap to control fan only
Heating and Cooling Controls
Temperature
- Slide your finger around the temperature wheel to select your desired temperature.
- The control shows the current temperature registered by the product.
- The temperature can also be adjusted using the ‘-’ ‘+’ icons.
Fan Speed
Tap below options to control fan speed
- Low
- Medium
- High
Product Controls Screen
Sleep Mode – For Heating or Cooling modes only
- Sleep mode can be turned On/Off using the toggle.
- When sleep mode is turned on, fan speed is set to Low by default.
- After the sleep function is enabled if the ambient temperature is less than or equal to the desired temperature in cooling mode, the desired temperature will rise by 1°C after 1 hour and another 1°C after 2 hours (a total rise of 2°C).
- In heating mode, if the ambient temperature is greater than or equal to the desired temperature, then the desired temperature will decrease by 1°C after 1 hour and again by 1°C after 2 hours (a total decrease of 2°C)
Swing
- Swing mode can be turned On/Off using the toggle.
- When turned on, the flap on the top of the product will move up and down when the fan is in operation
Set Timer – auto off timer
- This enables the setting of the auto-off timer.
- It can be set from 1 to 24 hours.
- After the timer expires, the product will switch off.
Dehumidify Controls
Swi ng
- Swing mode can be turned On/Off using the toggle.
- When turned on, the flap on the top of the product will move up and down when the fan is in operation
Set Timer -auto off timer
- This enables the setting of the auto-off timer.
- It can be set from 1 to 24 hours.
- After the timer expires, the product or device will switch off.
Fan Controls
Tap below options to control fan speed
- Low
- Medium
- High
Swing
- Swing mode can be turned On/Off using the toggle.
- When turned on, the flap on the top of the product will move up and down when the fan is in operation
Set Timer -auto off timer
- This enables the setting of the auto-off timer.
- It can be set from 1 to 24 hours.
- After the timer expires, the product or device will switch off.
Troubleshooting
Notifications will be sent out for these errors 
Schedules
Schedules can be set up to have the unit turn on and off into any mode or
setting.
Setting up a schedule:-
- Open the Myko App and then tap the schedule button at the bottom right of the screen
- Tap + and select your device
- Select the days and timings, then tap save
Help & Advice
Device could not be added to the Myko App
If you are having trouble connecting to Myko and the product is powered on and
close by, the problem could be one of the following:
- QR code is lost or damaged. You can onboard the product by using the steps in the Myko Support Guide, “Onboarding Products” that can be found on mykoapp.com. Or within the Quick Start Guide included in the packaging.
- Wrong QR code. You are scanning the wrong QR code, make sure you are scanning the QR code that is on your product or on the Quick Start Guide. If these continues, then, follow the instructions in Can I set up a Myko product without a QR Code? What can be found within the FAQ’s on mykoapp.com
- Non-Myko device. Double-check that the product is, in fact, a Myko device. Myko devices will have a Myko logo and QR code, non-Myko products will not have a logo or QR code
Individual product support guides and FAQ’s are available to help with Myko product-specific and operational questions. Please visit www.mykoapp.com
References
- Myko - Smart Home Living - on Google Play & App Store
- Myko - Smart Home Living - on Google Play & App Store
- Myko - Smart Home Living - on Google Play & App Store
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>