ANKER PAP 22 Prime Charging Station Instructions
- July 3, 2024
- Anker
Table of Contents
ANKER PAP 22 Prime Charging Station
Product Information
Specifications:
- Product Number: A91B2 51005004828 V01
- Compliance: FCC, IC, RSS-GEN
- Distance Requirement: Minimum 20cm between product and body
- Warranty: Connected Equipment Warranty
Product Usage Instructions
Safety Instructions:
Ensure to comply with FCC and IC radiation exposure limits by maintaining a
minimum distance of 20cm between the product and your body during installation
and operation.
Installation :
- Place the product on a stable surface with at least 20cm distance from your body.
- Connect the necessary cables following the user manual guidelines.
- Power on the device and ensure proper functionality.
Operation :
Operate the device within the specified conditions to prevent interference and
ensure optimal performance.
Frequently Asked Questions (FAQ)
-
Q: What should I do if the device causes interference?
A: If interference occurs, try adjusting the positioning of the device or other electronic devices in the vicinity. Ensure proper distance from other devices to minimize interference. -
Q: How can I claim the Connected Equipment Warranty?
A: To claim the warranty, follow the instructions provided in the warranty documentation or contact customer support for assistance.
For tutorial videos, FAQs, manuals, and more information, please visit:
- https://support.anker.com
- Or scan the QR code below:
- Product Number: A91B2
- 51005004828 V01
Important Safety Instructions
- Do not connect this product to an outlet that is not grounded.
- Do not use with extension cords.
- Use this product only in dry locations and indoors.
- Do not daisy-chain this product with other power strips.
- Keep this product out of reach of children.
- In the event of failure or a component defect, this product should not be repaired by service personnel. Dispose of this product in accordance with local environmental protection regulations.
- The surge protection feature safeguards your devices against voltage fluctuations, surges, and spikes. If the Surge Protection indicator is off, it signifies that the protection is not active.
- Ensure that the socket-outlet is easily accessible at all times.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party:
- Company Name: Fantasia Trading LLC
- Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
- Telephone: 1-800-988-7973
- Radiation Exposure Statement
- This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the product and your body.
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device contains licence-exempt transmitter(s)/receiver (s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference
- This device must accept any interference, Including interference that may cause undesired operation of the device.
IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the product and your body.
Connected Equipment Warranty
Anker Innovations Limited (“Anker”) offers a limited Connected Equipment
Warranty (CEW) for Anker Power Strips and Outlet Extenders as listed below.
The product shall be purchased originally from Anker and free of defects in
design, assembly, material, or workmanship. Anker reserves the right to
update, amend, and/or revise the terms of this CEW.
For more details about the CEW, please refer to the official website:
https://us.anker.com/pages/connected-equipment-warranty
Or scan the QR code below:
Documents / Resources
|
ANKER PAP 22 Prime Charging
Station
[pdf] Instructions
A91B2, 2AOKB-A91B2, 2AOKBA91B2, PAP 22 Prime Charging Station, PAP 22, PAP 22
Charging Station, Prime Charging Station, Charging Station
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>