SounDigital RLC-1000750670 SD Remote Level Control Owner’s Manual
- July 1, 2024
- SOUNDIGITAL
Table of Contents
SounDigital RLC-1000750670 SD Remote Level Control
Specifications
- Model: SD REMOTE LEVEL CONTROL
- Cable Length: 16.4 feet (5 meters)
- Accessory: 02 4x12mm self-tapping Phillips screws
- Compatibility: SounDigital products with REMOTE LEVEL CONTROL input indication
- Weight: 0.044 kg (0.097 lb) – Net, 0.173 kg (0.381 lb) – Gross
INTRODUCTION
In this manual you will learn about the features of SD REMOTE LEVEL
CONTROL, an exclusive accessory for SounDigital audio amplifiers, it provides
improved compatibility with our products. Follow the information contained
here and enjoy an exceptional audio control experience. The device provides
practical, real-time adjustment of the amplifier’s volume level, putting the
user in total control of the sound experience.
If you deem it necessary, do not hesitate to contact our technical support via the following contact details:
Product Usage Instructions
PACKAGE CONTENTS
- 01 SD REMOTE LEVEL CONTROL.
- 16.4 feet (5 meters) of cable with RJ12 plug.
- 02 4x12mm self-tapping Phillips screws.
IMPORTANT INFORMATION
- The SD REMOTE LEVEL CONTROL accessory must be purchased separately, it does not come with the SounDigital audio amplifier.
- The SD REMOTE LEVEL CONTROL accessory is not compatible with products from other manufacturers.
- The SD REMOTE LEVEL CONTROL accessory is only compatible with SounDigital products that have the “REMOTE LEVEL CONTROL” input indication on the side of the amplifier (Fig. 01).
You can check whether the SounDigital amplifier has a compatible input by physically checking the device or the product’s digital manual, available for download at the address or QR Code below: www.soundigital.com/en/product- manuals/
Installation
- Ensure that the SounDigital amplifier has the REMOTE LEVEL CONTROL input indication as shown in Fig. 01.
- Purchase the SD REMOTE LEVEL CONTROL accessory separately if not already owned.
- Connect the SD REMOTE LEVEL CONTROL to the amplifier using the provided 16.4ft (5m) cable with RJ12 plug.
- Secure the SD REMOTE LEVEL CONTROL in place using the 4x12mm self-tapping Phillips screws.
SounDigital audio amplifiers are generally installed in trunks or confined spaces, which can make access to the amplifier’s controls difficult. With this in mind, the SD REMOTE LEVEL CONTROL was designed to conveniently bring the amplifier’s volume level control within reach of our hands, ensuring intuitive and efficient operation, and can be easily installed on the vehicle dashboard. Installing this device enhances the user’s experience by offering easier accessibility and simplifying the adjustment of the amplifier’s volume level. It is worth mentioning that this accessory is accompanied by a 16.4 feet (5 meter) cable, providing greater flexibility and versatility in installation.
LED monitoring
SD REMOTE LEVEL CONTROL provides the user, in addition to controlling the
amplifier’s volume level, the facility to monitor the amplifier’s operating
conditions in real time, through LEDs POWER and CLIP (Fig. 02).
AMPLIFIER OPERATIONAL LEDS
“POWER” LED indicator (blue)
- LED “POWER” Off …………………………….. Product off.
- LED “POWER” On…………………………….. Product on.
- LED “POWER” Flashing …………………. Low/high battery voltage. Out of operating voltage specification.
“CLIP” LED indicator (yellow)
- LED “CLIP” Off Product ……………………………………. operating normally.
- LED “CLIP” On……………………………………. Amplifier output distortion indication.
- LED “CLIP” Flashing…………………………. No audio. Output short circuit indication.
- LED “CLIP” Flashing…………………………. With audio. Indication of the beginning of distortion at the output.
Power and Monitoring
The SD REMOTE LEVEL CONTROL allows you to control the amplifier’s volume level
and monitor its operating conditions in real-time through LEDs.
LED Indicators:
- POWER LED: Blue color – Indicates power status (Off – Product off, On – Product on, Flashing – Low/high battery voltage).
- CLIP LED: Yellow color Indicates amplifier output status (Off – Normal operation, On – Output distortion, Flashing without audio – Output short circuit, Flashing with audio Beginning of distortion).
Dimensional Data
The SD REMOTE LEVEL CONTROL dimensions are as follows:
- Width: 57.90mm (2.27″)
- Height: 33.35mm (1.31″)
- Depth: 33.35mm (1.31″)
WWW.SOUNDIGITALUSA.COM
SOUNDIGITALUSA
SOUNDIGITALUSA
FAQ
Is the SD REMOTE LEVEL CONTROL included with the SounDigital audio
amplifier?
No, the SD REMOTE LEVEL CONTROL accessory must be purchased separately.
Can the SD REMOTE LEVEL CONTROL be used with amplifiers from other
manufacturers?
No, the SD REMOTE LEVEL CONTROL is only compatible with SounDigital products.
Where can I find the digital manual for SounDigital products?
You can download the product’s digital manual from www.soundigital.com/en
/product-manuals/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>