PHILIPS BDP100 LED30, 830 II DS PCF GR 62P TownGuide Performer Owner’s Manual

: June 30, 2024
: Philips

Table of Contents

BDP100 LED30, 830 II DS PCF GR 62P TownGuide Performer
Specifications
Product Usage Instructions
Installation
Control and Dimming
Maintenance
- Frequently Asked Questions (FAQ)
1. Can the LED module be replaced in this product?
2. Is this lighting fixture suitable for outdoor use?
3. Does the product come with surge protection?

BDP100 LED30, 830 II DS PCF GR 62P TownGuide Performer

“`html

Specifications

Product Name: TownGuide Performer BDP100
LED30/830 II DS PCF GR 62P
Light Source: LED module 3000 lm, 830 warm
white
Safety Class: II
Distribution: Symmetrical
Cover: Polycarbonate bowl/cover frosted
Color: Gray
Mounting: Post-top for diameter 62 mm
Input Voltage: 220-240 V
Power Consumption: 23.5 W
IP Rating: IP66 (Dust penetration-protected,
jetproof)
Impact Protection: IK10 (20 J
vandal-resistant)
Surge Protection Level: Up to 6 kV
differential mode and 6 kV common mode
Warranty Period: 5 years
Compliance: EU RoHS compliant

Product Usage Instructions

Installation

Ensure the post-top diameter is 62 mm for proper mounting.
Connect the lighting fixture to a power source with an input
voltage of 220-240 V.
Securely fasten the fixture using appropriate screws or
mounting hardware.

Control and Dimming

This product does not support dimming. It operates at a constant
light output.

Maintenance

This luminaire is equipped with serviceable parts including the
LED board, driver, control units, surge protection device, optics,
front cover, and mechanical parts. Regularly check and clean these
components to ensure optimal performance.

Frequently Asked Questions (FAQ)

1. Can the LED module be replaced in this product?

Yes, the LED module in this product is replaceable. Refer to the
datasheet for instructions on replacing the light source.

2. Is this lighting fixture suitable for outdoor use?

Yes, this luminaire is designed for outdoor use with an IP66
rating for dust penetration protection and jetproofing.

3. Does the product come with surge protection?

Yes, the product offers surge protection up to 6 kV in both
differential and common modes.

“`

Lighting

TownGuide Performer

BDP100 LED30/830 II DS PCF GR 62P
TOWNGUIDE PERF FLAT CONE, LED module 3000 lm, 830 warm white, Safety class II, Distribution symmetrical, Polycarbonate bowl/cover frosted, Gray, Post-top for diameter 62 mm
The TownGuide Performer family consists of six recognizable, yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED lights sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energyreduction programs. This includes LumiStep, DynaDimmer, and LineSwitch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with integrated gland located in the spigot, there’s no need to open the luminaire for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.

Product data
General Information Lamp family code

LED30 [LED module 3000 lm]

Light source replaceable Number of gear units

Datasheet, 2024, May 29

Yes 1 unit
data subject to change

TownGuide Performer

Driver included Light source engine type Service tag Product family code Lighting Technology Value ladder Serviceability class

Yes LED Yes BDP100 [TOWNGUIDE PERF FLAT CONE] LED Performance Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts

Light Technical Upward light output ratio Luminous Flux Standard tilt angle posttop Standard tilt angle side entry Luminous Efficacy (rated) (Nom) Correlated Color Temperature (Nom) Color rendering index (CRI) Light source color Optical cover type Luminaire light beam spread Optic type outdoor

3 1,710 lm 0° 73 lm/W 3000 K 80 830 warm white Polycarbonate bowl/cover frosted 75° Distribution symmetrical

Operating and Electrical

Input Voltage

220-240 V

Line Frequency

50 to 60 Hz

Inrush current

22 A

Inrush time

0.29 ms

Power Consumption

23.5 W

Power Factor (Fraction)

0.97

Connection

Screw connection block 5-pole

Cable

–

Number of products on MCB of 16 A type B 26

Temperature Ambient temperature range

-40 to +35 °C

Controls and Dimming Dimmable Driver/power unit/transformer Control interface Constant light output

No Power supply unit regulating No

Mounting device Optical cover shape Optical cover finish Overall length Overall width Overall height Overall diameter Effective projected area Dimensions (Height x Width x Depth)

Post-top for diameter 62 mm Conical flat Frosted 570 mm 570 mm 209 mm 570 mm 0.051 m² 209 x 570 x 570 mm

Approval and Application Ingress protection code
Mech. impact protection code Surge Protection (Common/Differential)
Sustainability rating Protection class IEC Flammability mark CE mark ENEC mark Warranty period EU RoHS compliant

IP66 [Dust penetration-protected, jetproof] IK10 [20 J vandal-resistant] Luminaire surge protection level until 6 kV differential mode and 6 kV common mode Lighting for circularity Safety class II Yes ENEC mark 5 years Yes

Initial Performance (IEC Compliant) Luminous flux tolerance Initial chromaticity Power consumption tolerance Init. Color Rendering Index Tolerance

+/-7% (0.43, 0.40) SDCM <5 +/-10% +/-2

Over Time Performance (IEC Compliant)

Driver failure rate at 5000 h

0.5 %

Control gear failure rate at median useful 5 %

life 50000 h

Control gear failure rate at median useful 10 %

life 100000 h

Lumen maintenance at median useful life* L98

50000 h

Lumen maintenance at median useful life* L96

100000 h

Application Conditions Performance ambient temperature Tq Maximum dim level

25 °C Not applicable

Mechanical and Housing Housing Material Reflector material Optic material Optical cover material Fixation material Housing Color

Aluminum Acrylate Polycarbonate Steel Gray

Product Data Order product name Full product name Full product code Order code Material Nr. (12NC) Numerator – Quantity Per Pack

BDP100 LED30/830 II DS PCF GR 62P BDP100 LED30/830 II DS PCF GR 62P 871829190993400 910925866296 910925866296 1

Datasheet, 2024, May 29

2

data subject to change

TownGuide Performer

Net Weight (Piece) EAN/UPC – Product/Case Numerator – Packs per outer box
Dimensional drawing

6.200 kg 8718291909934 1

EAN/UPC – Case

8718291909934

© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.

www.lighting.philips.com 2024, May 29 – data subject to change