3 in 1 Magnetic Wireless Charger

Product Information

Specifications:

• Model: ABC123
• Dimensions: 10 x 5 x 3 inches
• Weight: 2.5 lbs
• Power Source: Rechargeable battery
• Material: Plastic

Product Usage Instructions:

1. Charging:

Before first use, ensure the product is fully charged using the
provided charger. Connect the charger to a power source and plug it
into the product’s charging port. Allow it to charge for at least 4
hours.

2. Powering On/Off:

To power on the product, press and hold the power button for 3
seconds. To power off, repeat the same process. Make sure to turn
off the product when not in use to conserve battery.

3. Functionality:

This product has multiple functions accessible via the control
panel. Refer to the user manual for specific instructions on each
function. Use the appropriate buttons to navigate through the
functions.

4. Maintenance:

Regularly clean the product with a damp cloth and mild
detergent. Do not submerge in water. Store in a cool, dry place
when not in use.

Frequently Asked Questions (FAQ):

Q: How long does the battery last on a full charge?

A: The battery can last up to 8 hours on a full charge,
depending on usage.

Q: Can this product be used outdoors?

A: This product is designed for indoor use. Avoid exposing it to
moisture or extreme temperatures.

Q: What should I do if the product malfunctions?

A: If you encounter any issues, refer to the troubleshooting
section of the user manual. If problems persist, contact customer
support for assistance.

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>