msi VELOX100RW Mpg Velox White Mid Tower User Guide

msi VELOX100RW Mpg Velox White Mid Tower

Specifications

• Case Dimensions: 474(D) x 231(W) x 490(H) mm / 18.67(D) x 9.09(W) x 19.29(H) inch
• Motherboard Support: ATX/ M-ATX/ ITX
• Drive Bays: 2x 2.5 SSD trays, 2x 3.5 HDD trays
• IO Panel: 1x LED switch button, 1x USB 3.2 Gen2 Type C port, 2x USB 3.2 Gen1 Type A ports, 1x Mic in jack, 1x Audio out jack, 1x Reset button, 1x Power button
• Fan Support : Top – 120 mm x3 / 140 mm x2, Front – 120mm x 3 / 140mm x 3, Rear – 120 mm x 1, Side – 120 mm x 2
• Radiator Support Clearance: Top – 120/140/240/280/360 mm, Front – 120 / 140 / 240 / 280 / 360 mm, Rear – 120 mm, Side – 120/240 mm
• CPU Cooler Height: Max 175 mm / 6.89 inch
• Graphics Card Length : Max 380 mm / 14.96 inch
• PSU Length : Max 220 mm / 8.66 inch (without 3.5” HDD tray installed)
• Material: Chassis – SPCC 0.6 mm, Left Panel – Tempered glass, Right Panel – Metal

Product Usage Instructions

1. Opening the Left & Right Side Cover
   To access the interior components of the case, gently remove the left and right side panels by unscrewing the fastening screws located on the back of the case.

2. Motherboard Installation
   Install your ATX, M-ATX, or ITX motherboard onto the standoffs inside the case. Secure the motherboard using the provided screws.

3. Graphics Card Installation

   • Vertical Installation: Use the vertical graphics card holder kit to securely install your graphics card in a vertical position.
   • Horizontal Installation: For horizontal installation, use the PCIe slots on the motherboard and secure the graphics card with appropriate screws.

4. ARGB Fan Connection
   Connect the ARGB fans to the included fan LED controller for customizable lighting effects. Follow the LED switch control description for changing LED effects.

Accessories

Specification

Case Features (MPG VELOX 100P AIRFLOW)

Case Features (MPG VELOX 100R)

Side & Front View

IO Panel

1. LED switch button
2. USB 3.2 Gen 2 Type-C
3. USB 3.2 Gen 1 Type-A
4. Mic in
5. Audio out
6. Reset button
7. Power button

3.5″ HDD Installation

2.5″ SSD , HDD Installation

Opening the Left & Right Side Cover

Motherboard Installation

Graphics Card Vertical Installation

Graphics Card Horizontal Installation

ARGB Fan Connection

LED switch control description:

1. Short press the LED switch once to switch the LED effect
2. Press and hold the LED switch for 3 seconds the LED flash white light once, and then into the MSI motherboard Mystic Light synchronization mode. Short press once to back to the Hub control mode.
3. Press and hold the LED switch for 6 seconds to turn off the LED.

Note

• This LED Hub can support up to 10 MSI devices or 6 non-MSI devices.
• Each port can support a maximum of 64 ARGB LEDs, with a total of no more than 128 LEDs.
• Exceeding these limits may cause ARGB LEDs to display abnormal colors, flicker, or be unable to change colors.

FAQ

Q: How do I switch between different LED effects on the fans?
A: Short press the LED switch once to switch the LED effect. Press and hold the LED switch for 3 seconds to enter MSI motherboard Mystic Light synchronization mode.

Q: What is the maximum CPU cooler height supported by the case?
A: The case supports a maximum CPU cooler height of 175 mm.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>