GLETON GLF2418 Robotic Arm Basin Faucet Instruction Manual
- June 29, 2024
- GLETON
Table of Contents
GLETON GLF2418 Robotic Arm Basin Faucet Instruction Manual
1. Condition for use
a. Water pressure range for hot/cold water: Min 0.05MPa~Max 0.75MPa.
b. Water temperature ≤70℃, Do Not use steam for hot water.
c. It might deform or crack due to freezing when the ambient temperature is
under 0℃, so please use it above 0℃.
2. Maintenance and Use Precautions
a. Please use the faucet in a gentle way for long-term durability.
b. Please unscrew and clean the aerator when the spout is blocked.
c. Do Not use nylon or detergent like cleanser and polishing powder that
contains coarse particles to do the cleaning.
d. Do Not use any acid detergent to avoid corroding the plating, please wash
well the ceramic around the product when cleaning with acid detergent.
e. Please use a cloth dipped in a neutral detergent diluted properly to do the
cleaning when the product is dirty and then wipe it clean with a dry soft
cloth.
f. The plating surface of the product will be tarnished when it’s attached
with any cosmetic or detergent, please wash well and wipe it with a dry soft
cloth.
g. Please take necessary warming measures to your household water supply
equipment when it’s under 0℃. Do Not use the switch handle when the product is
frozen, unfreeze it with hot water before you use it.
h. Free replacement or compensation will not apply for any product damage,
property loss and body inquiry due to non-compliance to the instruction terms.
3. Instruction for Use
-
Water flow rate adjustment
a. Turn the handle toward left, water flow rate increases.
b. Turn the handle toward the faucet, water flow decreases. -
Water temperature adjustment.
a. Turn the handle frontward for hot water.
b. Turn the handle backward for cold water
4. Installation Instruction
a. Make sure to clean the pipes to avoid blocking before installation
b. Please note that the hole for installation must be φ35mm. See the
illustration on the right.
c. Make sure to clean the dirt around the hole before installation,
d. Be cautious to protect the product surface from scratching during unpacking
and installation.
Do Not twist the product with pipe wrench with full force.
Read More About This Manual & Download PDF: