LANCOM SYSTEMS 1803VA Router and SD-WAN Edge Instruction Manual

LANCOM SYSTEMS 1803VA Router and SD-WAN Edge

Specifications

• Model: LANCOM 1803VA
• Power Supply: Supplied power adapter
• Interfaces: WAN (SFP / TP combo port), Ethernet, ISDN, USB, VDSL / ADSL
• LED Indicators: Power Off (Blue, permanently on), Online (Blue, blinking)

Connect different interfaces as follows:

• For WAN connections, insert a LANCOM SFP module into the WAN SFP interface or connect the WAN TP interface to a WAN modem.
• Use kiwi-colored connectors to connect Ethernet interfaces ETH 1 to ETH 4 to PC or LAN switch.
• For ISDN, connect to ISDN 1 or ISDN 2 internal bus] interfaces.
• Use the USB interface for USB data mediums or printers.
• Connect the VDSL interface and TAE socket using the DSL cable for IP-based connections.

FAQ
Q: Can I use third-party accessories with the LANCOM 1803VA?
A: No, support for third-party accessories is not provided. Please use only recommended accessories for optimal performance.

Mounting & connecting

Hardware Quick Reference

LANCOM 1803VA

1. Power supply
   connection socket Use only the supplied power adapter!

2. Reset button
   Short press > device restart Long press > device reset

3. Serial USB-C configuration interface
   A USB-C cable can be used for optional configuration of the device on the serial console. (cable not included)

4. Analog interfaces
   Connect analog terminal devices to the analog interfaces either directly via RJ11 or with the help of the enclosed TAE adapters.

5. WAN interfaces (SFP / TP combo port)
   Insert a suitable LANCOM SFP module (e.g. 1000Base-SX or 1000Base-LX) into the WAN SFP interface. Choose a cable compatible with the SFP module and connect it as described in the SFP module’s mounting instructions
   www.lancom-systems.com/SFP-module-MI.
   (SFP module and cable are not included)
   If desired, alternatively connect the WAN TP interface to a WAN modem using an Ethernet cable.

6. Ethernet interfaces
   Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

7. ISDN interfaces

8. ISDN 1: Internal (NT) ISDN bus

9. ISDN2: Internal (NT) ISDN-bus

10. USB interface
    Connect a USB data medium or a USB printer to the USB interface. (cable not supplied)

11. VDSL / ADSL interface
    Connect the VDSL interface and the TAE socket of the provider using the enclosed DSL cable for the IP-based connection. (For more information, please contact your Internet provider).

• Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
• Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
• The power plug of the device must be freely accessible.
• Please note that support for third-party accessories is not provided.

Please observe the following when setting up the device

•  When setting up on the table, use the enclosed self-adhesive rubber pads, if applicable.
• Do not rest any objects on top of the device and do not stack multiple devices.
• Keep all ventilation slots of the device clear of obstruction.
• Rack installation with the optional LANCOM CPE blackline Rack Mount / CPE blackline Rack Mount Plus (separately available)

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 062

LED description & technical details

Hardware Quick Reference
LANCOM 1803VA

*) The additional power LED statuses are displayed in 5-seconds rotation if the device is configured to be managed by the LANCOM Management Cloud.
This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

References

• Business network solutions "engineered in Germany": LANCOM Systems GmbH
• DoC - LANCOM Systems GmbH
• Confluence Mobile - LANCOM Wissensdatenbank

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>