STUDIO FY9-C Integrated Smart Instrument Screen Instruction Manual

FY9-C Integrated Smart Instrument Screen

“`html

Specifications:

• 8.9-inch high-definition 2.5D laminated screen
• High-performance operating system
• 2 UI theme styles
• 5 car model colors available
• Resolution: 1920*720P
• Integrated smart instrument screen with camera

Product Usage Instructions:

Installation:

1. Gather the necessary tools: Plastic tool, Small Phillips
screwdriver, T20 screwdriver.

2. Ensure the screen is powered off before installation to
prevent malfunctions.

3. Follow the installation diagram provided in the manual.

Features:

– OTA upgrade capability for software updates

– Carplay/Android Auto integration for smartphone
connectivity

– Forward blind zone display for enhanced safety

Connection:

1. Connect the screen to the main wiring harness using the
adapter cable.

2. Ensure successful connection by checking the screen for a
“Connection succeeded” message.

Charging:

– To charge, plug in the charger after opening the charger
cover.

– Charging status will be indicated on the screen.

Door Status:

– All doors must be closed for normal operation interface
access.

Auto-assisted Driving:

– Follow prompts on the screen for auto-assisted driving mode
reminders.

Settings:

– Access and adjust settings through the on-screen menu
options.

FAQ:

Q: Can I use this product with any car model?

A: The product is compatible with Year 2017 and newer Model 3
and Year 2019 and newer Model Y.

Q: How do I know if the screen is properly connected?

A: Look for the “Connection succeeded” message on the screen
after connecting the wiring harness.

Q: Can I charge my device while using the screen?

A: Yes, you can charge your device by plugging in the charger
after opening the charger cover.

“`

Parts list

diagram

1

Screen Plastic tool Camera (optional)

Screen main wiring harness

Positioning stickers

USB stick

Fixed bracket

Adapter cable

1. Tools required for installation
Plastic tool; Small Phillips screwdriver ; T20 screwdriver Optional tools required ( T20 screwdriver; threading tape; 10mm socket)

2. Installation Precautions
Note: Please ensure that the screen is powered off to prevent malfunctions. Tip : For faster installation, be sure to read these instructions carefully.

8.9- inch high-definition 2.5D laminated screen
High performance operating system
The screen is large and does not block the wind
2 UI theme styles

0
Synchronously display original vehicle driving information Original vehicle control
Forward blind zone display
5 car model colors

Year: 17+ Model 3, 19+ Model Y Name: Model 3/Y FY9-C integrated smart instrument screen (with camera) (LHD) Features
1. Installation: Dedicated to special vehicles, non-destructive installation, does not affect the functions of the original vehicle 2. Experience: Linux high-performance operating system, 8.9- inch high-definition 2.5D laminated screen , 1 9 2 0 * 7 2 0 P , windproof design 3. Functions: Compatible with synchronized original car driving information display, compatible with synchronized original car screen partial data display, 2 creative UI theme style displays, adaptive day and night mode, supports original car side control, 5 car model colors, OTA one-click upgrade, PIaid mode, frontview camera 1080P, charging prompt, wired and wireless Carplay /Android Auto ,
Product Description

1. Specially designed for special vehicles, non-destructive installation without damaging the original vehicle wiring harness and functions. 2) Linux high-performance operating system, integrated with the car to achieve vehicle- machine integration , 8.9 – inch high-definition 2.5D laminated screen IPS true color full viewing angle, resolution 1920*720P highdefinition image quality, truly wind-free design experience 3) Compatible with synchronized original vehicle driving information display: (time, left and right turn signals, rear fog lights, side lights, low beam, high beam, automatic braking, seatbelts, outside temperature, speed limit reminder, battery usage, Vehicle distance, speed / door opening information, gear position, cruising range, total mileage, tire pressure, automatic assisted driving); compatible with synchronized partial data display on the original car screen: (same type icons for automatic assisted driving); 2 creative UI theme styles for display : (simple, classic); adaptive day and night mode (brightness adjustment), changes automatically in sync with the original car; compatible with the original car button control screen; 5 car model colors: (white, red, black, blue, gray); OTA: supported OTA one-click upgrade (universal WIFI- mobile phone Bluetooth), PIaid mode display , front-view camera 1080P (optional): long press the right button on the original car steering wheel to enter the front-view camera interface, charging prompt: (will prompt when opening the charger cover : Not charging or charging), wired wireless Carplay/Android Auto : The new 5G network ensures stable connection, fast transmission without lag , and stable and smooth connection between Carplay module and mobile phone;

OTA upgrade
2

Carplay/Android Auto

Note: Priority will be displayed when the door is not closed, and the vehicle speed will be displayed after the door is closed!
Model classification: FY9-C is equipped with a camera (camera is shipped as standard)

2.5DIPS laminated screen
IPS high-definition true color full viewing angle, 2.5D lamination process. Resolution 1920*720P
3

Distracted vision makes information difficult to see
The original car’s central control screen
requires you to turn your head to read
information, which affects driving safety.

Focus on clear information
All information can be seen clearly through the direct view of the instrument panel, and it is not
blocked by the wind , making driving more
refreshing, safer and more convenient.

Instrument function
Open the door to start, drive safely, and improve driving safety. All information is displayed in real time, and you can understand the specific situation of the vehicle in real time without delay. Each
function is displayed as shown above. Note: Priority will be displayed when the door is not closed, and the
vehicle speed will be displayed after the door is closed!
4

Carplay, Android Auto
1. When in Carplay, press the right scroll wheel to the right to enter the Carplay connection interface. 2. Turn on Bluetooth in the phone settings and find the corresponding Bluetooth name on the machine, for example: CarKit- **** 3. Click the Bluetooth name of the machine on your phone to start pairing. 4. When connecting, the dialog box that pops up on the phone (use Carplay with ” Carplay” ) selects to use Carplay. 5. The connection is successful (full screen or split screen can be selected on the settings page) 6. Comes with a built-in speaker, which can output sound from the speaker when not connected to the car. 7. In P mode, touch the front wheel to enter CARPLAY and the rear wheel to enter Android AURO.
Note: After entering the interface, please use your mobile phone to
connect to Bluetooth: Carkit-9DF3
5

Connection interface
Connecting
Connection succeeded

Charging tips When you open the charger cover, the screen will automatically pop up and it will not charge. When you plug in the charger and start charging, it will prompt that it is charging. After it is fully charged, it will prompt that charging is complete.
Door status
Open the car doors ( 4 doors), front cover, and trunk, and there will be corresponding status
prompts. Note: All doors need to be closed to enter the
normal operation interface.
6

Auto-assisted driving mode reminder
One minute after activating the automatic assisted driving mode, the prompt ” Please turn the steering wheel lightly ” will appear , or if the
automatic driving time is long, the reminder ” Automatic assisted steering cannot be activated again for this driving, please hold the steering wheel and drive manually ” will be displayed. The upper part of
the screen will flash along with the original car.

Setting method
1. When starting forward in D gear, it will automatically enter forward view when the speed is below 20 mph, and will automatically exit when it exceeds 20 mph (press the right wheel to push left to exit manually) 2. Press and hold the right scroll wheel downward for 3 seconds to manually enter the front view. 3. Right scroll wheel: push left to exit, push right to confirm selection 4. Left scroll wheel: Push left and press for 3 seconds to restart the machine. Note: The trigger condition for forward view must be that the forward view switch on the settings page is turned on.
7

Set interface
Language switching, time zone switching, temperature switching, hour
format, US speed limit, tire pressure unit, car model color, day and night mode, brightness adjustment, Piaid switch, front camera, audio output, full screen switching, OTA upgrade
Note: 1. Press the right scroll wheel to the right or long press to the left to enter the setting interface.
2. OTA upgrade, long press the right scroll wheel to the right, the version information will appear

1
2 3
The lane rotates with the vehicle
The lane will rotate as the car turns the steering wheel (left, right, straight)
8

Carplay version shortcut

function

1. Click the Carplay icon to enter

Carplay in P file.

4

2. Click here to enter Android

Auto connection

3. Click here to enter the setting

5

interface 4. Volume addition and

subtraction

5. Whether to automatically and

quickly enter the Carplay switch

UI selection setting method
1. Click the right scroll wheel to the right to enter the UI selection interface 2. Touch to pull up the UI interface, and slide left or right to select the desired UI . 3. The right scroll wheel can be scrolled up and down. The selected UI will appear in brightness. After selection, push the right scroll wheel left. (The current picture is of the old UI , but the operation method is the same)
9

Switch mode 1. Adjust the switch by touching left or right (Settings, Theme, Carplay , Android Auto )
2. Push the right scroll wheel left or right to confirm the switch.

Forward and reverse tips
Follow the display corresponding to the original vehicle gear information status prompt
10

Innovative design
The product design style is simple, the screen is large and does not block the wind , and it adopts touch operation. It is a
high-end Tesla instrument that is truly not blocked by the wind , redefining Tesla’s high-end instrument screen.
11

1. Remove the triangular panel on the left side (the same goes for the right side)

2. Remove the instrument middle trim panel

3. Take out the passenger rectangular trim panel
12

4. Remove the clips on the passenger door trim panel and remove the door sill trim panel (the same applies to the left and right)

5. Take out the positioning sticker

6. Place the sticker correctly on the driver’s side front dash trim plate

7. The three points on the sticker correspond to the

13

three holes on the dash trim plate.

8. Align the wiring harness plugs on the screen and pass them through

9. The screen is stuck in, and the back of the trim panel looks like this
14

10. Take out the fixing bracket and tighten the screws one by one.

Intel version

1. Use T20 to unscrew the fixing screws and buckles of the passenger floor.
15

2. Unplug the second gray plug on the computer board and plug it in

AMD version

1. Connect the plug to the white plug under the A-pillar of the right front seat
16

Y
2. Insert the plug into the blue plug under the A-pillar of the right front seat

Front view plug The(yoelplowtiwoirneahalr)ness is the

fwronitrviinewgplhugarness

11. Plug in the corresponding plug according to your 12 . Each plug has a corresponding label. You must check it first. If it is

car version, and then run the wiring harness along the correct, just plug in the plug according to the color. If you find anything wrong,

edge to the front of the steering wheel.

please contact us (the yellow wire harness is optional on the front view)

17

13. After plugging in the plug, test whether the product is nor mal (you can watch the usage video for testing)

14. Restore it (the screen air vent must be inserted into the original car air outlet)

1. Remove the air intake trim panel

2. Use a No. 10 socket to unscrew the four fixing screws.

3. Pry open the buckle that fixes the front trunk
18

4. Unplug the front trunk button and take out the front trunk

6. Pass the camera harness through the heat dissipation grille hole into the cabin.

7. Use double-sided tape to stick the camera in the center of the license plate, align the position with the fixing screw (clean it before pasting)

8. Cut off the raised position of the rubber plug

19

as shown in the picture ( the location is in the upper right corner of the passenger frunk)

9. Thread the threading tape from the cut position ( Don’t break the rubber plug, otherwise it will be difficult to snap it back in)

9. Pull out the threading strap from the passenger side (tie the extension harness over there in the cabin)

11. Plug the extension cord into the camera plug

20

(fix the excess wire harness)

10. Walk along the main wiring harness to the front of the steering wheel (the wiring harness can be fixed with tape to prevent abnormal noise)
The yellow wire harness is the front view plug
12. Plug the other end into the screen plug. (fix
the excess wire harness)

The yellow wire harness is the front view plug
1. Plug all the plugs in, turn on the product and test whether there is any problem with the front view, then restore and install the vehicle.
21

Fault
Black screen (the screen does not light up after installation)
Start without display The original car information is not synchronized or not displayed How to switch between day and night mode Dimming
How to switch body color?
How to switch UI interface Why can’t I enter the front view? What should I do if the machine crashes?
How to adjust the volume

Reason

Solution

Other factors cause the microprocessor to work abnormally
After the host plug was unplugged, it was not plugged back within 5 minutes.
The host or screen plug is not tightly plugged in
Background data error

restart key
Connect the wiring harness, lock the car for 2 hours, keep the mobile phone and remote control key more than 20 meters away from the car, and check after 2 hours to see if the screen can be lit. Reconnect the console plug Reconnect the console plug

The power line protocol line is blocked
Push the right scroll wheel to the right to enter the settings interface Push the right scroll wheel to the right to enter the settings interface Push the right scroll wheel to the right to enter the settings interface
Press the right scroll wheel to the right to enter the UI selection interface Set the front-view camera to turn off

Re-plug the cable and check the cable interface Set to manual or automatic mode Set to desired brightness Set desired color Set up the required UI Open the front camera on the settings page

system breakdown
1. There are shortcuts on the right side of the interface that can be adjusted directly by touching 2. Rotate the left wheel up and down to increase or decrease the volume.

Press and hold the left scroll wheel to the left to force restart.

22

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>