GLOBO LIGHTING 78282 SUSSY Wall Clock Instruction Manual
- June 16, 2024
- GLOBO LIGHTING
Table of Contents
GLOBO LIGHTING 78282 SUSSY Wall Clock
Specifications
- Battery: 1x AA 1.5V (not included)
- LED: 16W DC27-42V 230V~ 50Hz
Product Usage Instructions
Installation
- Find a suitable location to install the product.
- Ensure that the power source is compatible with the product’s specifications.
- Insert 1x AA 1.5V battery (not included) into the designated battery slot.
- Connect the product to a power outlet using the provided power cord.
Power On/Off
To turn the product on, switch the power button to the “ON” position. To
turn it off, switch the power button to the “OFF” position.
Replacing LED and Control Gear
Note: The LED light source and control gear cannot be replaced.
Troubleshooting
If you encounter any issues with the product, please refer to the
troubleshooting section in the user manual or contact our customer support at
www.globo-lighting.com.
Installation
Light source
- The light source is not interchangeable because it is determined by the surrounding product design.
- This product contains a light source of energy efficiency class
.
FAQ
- Q: Can I replace the LED light source?
- A: No, the LED light source cannot be replaced.
- Q: Can I replace the control gear?
- A: No, the control gear cannot be replaced.
GLOBO Handels GmbH
Gewerbestrasse 3
A-9184 Sankt Peter
AUSTRIA
References
Read User Manual Online (PDF format)
Loading......