Letsfit E26 Smart Watch User Guide
- June 28, 2024
- Letsfit
Table of Contents
E26 Smart Watch
“`html
Specifications:
- Product: E26 Smart Watch
- Package Contents:
- Smart watch with bands x 1
- Charging cable x 1
- Quick start guide x 1
Product Usage Instructions:
Charging:
-
Please fully charge your watch before initial use.
-
Insert the USB plug of the charging cable into a USB
charger. -
Attach the other end to the charging contacts on the back of
the watch.
Install the Letsfit App:
-
You can download Letsfit App from Apple Store / Google Play or
scan the QR codes below to download. -
Open the Letsfit App. Go to the Device page and tap Pair
device.
Pair the Watch with Your Phone:
-
Turn on the Bluetooth of your phone.
-
Choose a pairing method: Scan QR Code or manually pair with the
watch. -
Tap on the watch to confirm the connection.
Controls:
The watch controls include waking the screen, returning to the
home screen, pausing/resuming sports activities, powering on/off,
navigating different interfaces, entering functions, changing watch
faces, etc.
Watch Interfaces:
Customize settings like Do Not Disturb mode, Wake On Wrist
Raise, screen brightness, power-saving mode, BT Call function, and
more.
Notifications:
Receive notifications on your watch. Note that for Android
phones, proper App connection and settings are required for message
notifications.
Important Safety Guide:
It is recommended to follow safety guidelines such as keeping
your skin dry when wearing the watch, avoiding wearing it too
tight, and cleaning it after exposure to water.
FAQ:
Q: What should I do if my watch faces connectivity issues?
A: Try restarting both your watch and phone, ensure Bluetooth is
enabled on both devices, and check for any software updates on the
App.
Q: How can I change the watch face?
A: Hold the home screen to access options for changing the watch
face.
“`
E26 Smart Watch
Quick Start Guide
All pictures in this guide are for illustration purposes only. Actual product
may vary due to product firmware and app upgrades. This quick start guide will
support you getting started using your smart watch.
PACKAGE CONTENTS
Smart watch with bands x 1
USING YOUR WATCH
Charging
1
Please fully charge your watch before initial use.
1 Insert the USB plug of the
charging cable into a USB charger.
Charging cable x 1 Quick start guide x 1
2 Attach the other end to
the charging contacts
on the back of the
watch.
Install the Letsfit App
2
You can download Letsfit App from Apple Store / Google Play or scan the QR codes below to download.
2
Open the Letsfit App. Go to the “Device” page and tap “Pair device”.
15: 0 5
Pair device
iOS 12.0 & above
Letsfit
Android 6.0 & above
Note: The App is only compatible with smartphones, not tablets or PCs.
Pair the Watch with Your Phone
3
15: 0 5 Settings
Bluetooth
Bluetooth
1
Turn on the Bluetooth of your phone.
15: 0 5
Pair device
Searching…
Pair by model Scan QR Code
3
Two pairing methods
Tap “Pair by model ” ¹”E26-XX-XXXX” to pair.
OR
Tap “Scan QR Code ” and scan the QR code on the watch to pair
15: 0 5
Pair device Device found
E26-XX-XXXX
Bluetooth Pairing Request Pair with “E26-XXXX” ?
Cancel
Pair
Note “Bluetooth Pairing Request” will pop up twice on your phone, please click “Pair” both times.
4 Tap on the watch to
confirm the connection.
Controls
4
· Function Button
Wake the screen. Press Return to the home screen.
Pause / resume the sport.
Hold Power on / off the watch.
· Touch Screen
Swipe to go to different interfaces. Tap to enter the function. Swipe the
screen to the right to
return to the previous interface. Hold the home screen to change
the watch face.
Watch Interfaces
5
Enable/Disable Do Not Disturb (DND) mode.
Some basic settings of the watch.
Enable/Disable Wake On Wrist Raise.
Adjust screen brightness.
Enable/Disable Power Saving mode.
Enable/Disable BT Call function.
Quick Settings
Dialpad Contacts Call records Voice assistant
Function List
Note: If your phone is an Android phone, only when your watch is connected to
the
Letsfit App, the App is running on your phone, and “Notification Alerts” is
enabled in the App, will messages be notified.
Notifications
20229 1236 15.2
Daily Data
Heart Rate
Sleep
Weather
Music
Switch function interfaces
Tips:
Quick Settings
Do Not Disturb (DND) mode:
· When the DND mode is enabled, the watch won’t ring or vibrate when it
receives incoming call alerts, SMS, app notifications.
· DND mode does not affect Alarms and Raise to Wake function.
Turn on Bluetooth Calling:
1. DND mode must be disabled before using Bluetooth Calling.
2. On the watch, tap
¹
to turn it on.
3. On your phone, go to “Settings” ¹ “Bluetooth” , tap “E26-xxxx” to connect.
Notes:
· To use the Bluetooth Calling feature on the watch, please keep the watch
connected to your phone via Bluetooth.
· Ringing or vibration switching can be modified in “Setting” ¹ “Ringtone”.
· This feature will reduce the watch’s battery life.
Weather
Weather
· On the “Device” page of Letsfit app, you can turn on/off the “Weather”
function, and the default is off
· Weather forecast for the next few days. Weather data is obtained through
your phone’s network. Connect the watch to your phone to timely update weather
data.
Important Safety Guide
Some people with allergic skin may react when their skin is exposed to
materials used in watches for a long time. This may be caused by allergies,
environmental factors, prolonged exposure to irritants such as sweat and soap,
or other factors. If you have known skin allergies, please pay special
attention when wearing the watch.
Please do not wear your watch too tight.
If your watch gets wet (for example after sweating or showering), clean and
dry it thoroughly before putting it back on your wrist.
Make sure your skin is dry before you put your watch back on.
Prolonged rubbing and pressure may irritate the skin, so give your wrist a
break by removing the watch regularly.
Important Safety Instructions
The device contains electrical equipment that may cause injury if not used
properly. For example, prolonged contact may contribute to skin allergies for
some users. To reduce irritation, please read the safety guidelines on the
following pages to ensure proper use and care.
· Do not expose your device to liquid, moisture, humidity or rain while
charging; do not charge your device when it is wet, as this may result in
electrical shock and injury.
· Consult your doctor before use if you have any preexisting conditions that
might be affected by using this device.
· Do not expose your watch to extremely high or low temperatures. · Do not
leave your watch near open flames such as cooking stoves, candles, or
fireplaces. · This product is NOT a toy – never allow children or pets to play
with this
product. Always store the product out of the reach of children. The devices
themselves or the many small parts they contain may cause choking if ingested.
· Never try to abuse, crush, open, repair or disassemble this device. Doing so
will void the warranty and can result in a safety hazard. · If any parts of
your product require replacement for any reason, including normal wear and
tear or breakage, please contact us. · Do not use your device in a sauna or
steam room. · Dispose of this device, the device’s battery and its package in
accordance with local regulations. · Do not check any notifications, or any
information on your device’s display while driving or in other situations
where distractions could cause injury or hazard. Always be aware of your
surroundings while exercising.
Battery Warnings
A lithium-ion battery is used in this device. If these guidelines are not
followed, batteries may experience a shortened life span or may cause fire,
chemical burn, electrolyte leakage, and/or injury. · Do NOT disassemble,
modify, remanufacture, puncture or damage the device
or batteries. · Do NOT remove or attempt to remove the non-user-replaceable
battery. · Do NOT expose the device or batteries to fire, explosion, or other
hazards.
Health Warnings
· If you have a pacemaker or other internal electronic device, consult your
physician before using a heart rate monitor.
· The optical wrist heart rate monitor emits green light and flashes
occasionally. Consult your physician if you have epilepsy or are sensitive to
flashing lights.
· The device, accessories, heart rate monitor, blood oxygen level measurement
and related data are intended to be used only for recreational purposes and
not for medical purposes and are not intended to diagnose, monitor, treat,
cure, or prevent any disease or condition.
· Always consult your physician before beginning or modifying any exercise
program.
· The heart rate and blood oxygen level readings are for reference only, and
no responsibility is accepted for the consequences of any erroneous readings.
· While the optical wrist heart rate monitor technology typically provides the
best estimate of a user’s heart rate, there are inherent limitations with the
technology that may cause some of the heart rate readings to be inaccurate
under certain circumstances, including the user’s physical characteristics,
fit of the device, and type and intensity of activity.
· The smart watch relies on sensors that track your movements and other
metrics. The data and information provided by these devices are intended to be
a close estimation of your activity and metrics tracked, but may not be
completely accurate, including step, sleep, distance, heart rate, blood oxygen
and calorie data.
FCC ID: 2BAS2-E26
NOTE: This equipment has been tested and found to comply with the limits for
Class B digital devices, in accordance with section 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>