ADA ZAC 1000 AC Voltage Detector Instruction Manual

ADA ZAC 1000 AC Voltage Detector

Product Information

Specifications

• Detection: AC Voltage
• Operation temperature: Not specified
• Operation humidity: Not specified
• Storage temperature: Not specified
• Power supply: Batteries
• Dimensions: Not specified
• Weight: Not specified

Product Usage Instructions

Checking for AC Voltage

1. Ensure the device is properly powered by inserting batteries.
2. Press the On/Off button to turn on the voltage detector.
3. Hold the detector near the area you want to check for AC voltage.
4. If AC voltage is detected, the LED will turn on, indicating the presence of voltage.

Using the Flashlight

1. To activate the built-in flashlight, press the On/Off button.
2. The flashlight with LED backlight will illuminate the area.
3. Press the On/Off button again to turn off the flashlight.

Frequently Asked Questions

Q: How do I replace the batteries in the ZAC 1000?

A: To replace the batteries, locate the battery compartment on the device, remove the old batteries, and insert new ones following the polarity markings.

Q: Can the ZAC 1000 detect DC voltage as well?

A: No, the ZAC 1000 is designed specifically to detect AC voltage only.

Q: What should I do if the LED does not turn on when checking for voltage?

A: Make sure the device is properly powered with fresh batteries. If the issue persists, contact customer support for assistance.

Description

• The Volt finder voltage detector is intended to check for the presence of AC voltage, signaling the user with an LED on.
• Built-in bright flashlight with ON/OFF button.

Features

1. Detector
2. Clip
3. On/Off button. Turns On/Off the torch.
4. Torch with LED backlight

Specifications

Safety instructions

• This instruction manual and any markings on the tool provide information for avoiding hazards and unsafe practices related to the use of this tool.
• WARNING Read and understand this material before operating or servicing this equipment.
• Failure to understand how to safely operate this tool can result in an accident causing serious injury or death.

Electric shock hazard:

• Contact with live circuits can result in severe injury or death.
• Do not use the unit if it is wet or damaged.
• Do not apply more than the rated voltage between the probe tip and the earth’s ground.
• Do not operate with the case open.
• Failure to observe these warnings can result in severe injury or death.
• Do not attempt to repair this unit. It contains no user-serviceable parts.
• Failure to observe these precautions can result in injury and can damage the instrument.

Battery Replacement

• Press the clip (2) and move the half of the housing in the opposite direction from the detector (1).
• Replace the batteries. Observe the polarity.

Operation

• The Voltage Detector is useful for identifying hot and neutral conductors, finding a break in a wire, and detecting the presence of AC voltage at.
• Outlets
• Switches
• Circuit breakers
• Fuses
• Wires and cables
• Note: The voltage detector can be used to find a break in a wire:
• To find a break in a hot conductor, trace the wire until the signal stops.
• To find a break in a neutral conductor, connect a load between the hot and neutral. Trace the wire until the signal stops.
• Place the probe tip (1) on or near the circuit or unit to be tested. The detector lights up in red color. Sounds alarm.
• LED indicates the presence of AC Voltage from 90~1000 VAC (50/60Hz).
• Note: The voltage detector cannot detect voltage on armored cable or cable in conduit, behind panels, or in metallic enclosures.

WARRANTY

• This product is warranted by the manufacturer to the original purchaser to be free from defects in material and workmanship under normal use for two (2) years from the date of purchase.
• During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at the manufacturer’s option), without charge for either part of labor.
• In case of a defect please contact the dealer where you originally purchased this product. The warranty will not apply to this product if it has been misused, abused, or altered.
• Without limiting the foregoing, leakage of the battery, and bending or dropping the unit are presumed to be defects resulting from misuse or abuse.

EXCEPTIONS FROM RESPONSIBILITY

• The user of this product is expected to follow the instructions given in the operators’ manual.
• Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of the product’s accuracy and general performance.
• The manufacturer, or its representatives, assumes no responsibility for the results of faulty or intentional usage or misuse including any direct, indirect, consequential damage, and loss of profits.
• The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any disaster (earthquake, storm, flood …), fire, accident, or an act of a third party and/or usage in other than usual conditions.
• The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss of data interruption of business, etc., caused by using the product or an unusable product.
• The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage other than explained in the users’ manual.
• The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due to connecting with other products.

WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:

1. If the standard or serial product number will be changed, erased, removed, or wil be unreadable.
2. Periodic maintenance, repair, or changing parts as a result of their normal runout.
3. All adaptations and modifications with the purpose of improvement and expansion of the normal sphere of product application, mentioned in the service instruction, without the tentative written agreement of the expert provider.
4. Service by anyone other than an authorized service center.
5. Damage to products or parts caused by misuse, including, without limitation, misapplication or negligence of the terms of service instruction.
6. Power supply units, chargers, accessories, and wearing parts.
7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of any liquids and foreign objects inside the product.
8. Acts of God and/or actions of third persons.
9. In case of unwarranted repair till the end of the warranty period because of damages during the operation of the product, its’ transportation, and storing, the warranty doesn’t resume.

WARRANTY CARD

• Name and model of the product __
• Serial number ____
• date of sale ___
• Name of commercial organization ____

stamp of a commercial organization

• The warranty period for the instrument exploitation is 24 months after the date of original retail purchase.
• During this warranty period, the owner of the product has the right to free repair of his instrument in case of manufacturing defects.
• Warranty is valid only with the original warranty card, fully and filled (stamp or mark of the seller is obligatory).
• Technical examination of instruments for fault identification which is under the warranty, is made only in the authorized service center.
• In no event shall the manufacturer be liable before the client for direct or consequential damages, loss of profit, or any other damage that occurs as a result of the instrument outage?
• The product is received in the state of operability, without any visible damages, in full completeness. It is tested in my presence. I have no complaints about the product quality.
• I am familiar with the conditions of qarranty service and I agree.
• purchaser signature __
• Before operating you should read service instructions!
• If you have any questions about the warranty service and technical support contact the seller of this product
• For more information, you can visit our website WWW.ADAINSTRUMENTS.COM, or write a letter with your questions to info@adainstruments.com

Documents / Resources

| ADA ZAC 1000 AC Voltage Detector [pdf] Instruction Manual
ZAC 1000 AC Voltage Detector, ZAC 1000, AC Voltage Detector, Detector
---|---

References

• ADA Instruments
• ADA Instruments

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>