ADA IPX8 Stream Pump Mini User Manual
- June 1, 2024
- ADA
Table of Contents
IPX8 Stream Pump Mini
User Manual
Before use
- Before using this product, be sure to read this instruction manual carefully and fully understand the correct way to use the product. Do not use the product unless you know how to use it.
- Keep this instruction manual in a safe place and refer back to it whenever necessary.
- Please note that ADA in not responsible for any breakage, damage, malfunction, and/or accident caused by improper use of this product.
- Never run the submersible pump idle. Turn on the submersible pump while it is submerged in water.
- Be sure to check that the pump is working properly when starting up or restarting after a power failure.
- The pump cannot be used in seawater.
- Do not give the pump a strong shock or drop it.
- If pieces of aquatic plants or other debris accumulate in the slit, remove them immediately.
- Do not allow small fish or shrimp to enter the pump through the slit or the top of the main body. If fish or shrimp should enter the main body, immediately unplug the USB adapter from the power outlet to rescue them.
- ADA is not responsible for any illness or death of organisms.
Safety Instructions
CAUTION: This symbol indicates a potentially hazardous situation which, if ignored and mishandled, may result in personal injury or property damage.
- Firmly insert the USB adapter into a power adapter. Do not use the USB adapter in a place where it may be exposed to water, humidity, or dust.
- Do not touch the USB adapter with wet hands as it may cause electric shock.
- Unplug the USB adapter from the power outlet when not using the product.
- When using the product, keep the USB adapter and power cord securely connected.
- This product is designed for both 50Hz and 60Hz, but use the correct power supply voltage. Improper use may cause fire, electric shock, or a malfunction.
- Do not damage the power cord or handle it roughly. Doing so may cause fire, electric leakage, or electric shock.
- Never attach an intermediate switch to the power cord or modify the main body of the submersible pump. Doing so may cause a malfunction or serious accident.
- KEEP OUT OF REACH OF CHILDREN.
- Unplug the USB adapter from the power outlet when the submersible pump needs to be stopped.
Features of Stream Pump Mini
This pump produces an appropriate water flow in a small aquarium. The flow is not too strong and can be widely used for keeping aquatic organisms and growing aquatic plants.
Parts
Usage
① Use the suction cup to fix the product to the glass surface.
② After confirming that the main unit is submerged in water, plug the power
cord into the USB adapter. Do not run the submersible pump idle, as this may
cause a malfunction.
[Maintenance Procedure]
- Daily Inspection and Precautions / Periodically check to see if the flow rate of water coming out of the outflow port has decreased.
- Pump maintenance / Unplug the USB adapter from the power outlet, disconnect each part, and carefully remove any foreign objects using tweezers or similar tools. If the impeller or other parts are dirty, wash off the dirt with a brush or similar tool.
*Do not remove or disassemble the pump unless necessary.
Precautions for use
- Do not attach a sponge or other object that will put excessive load to the inflow part of the cover. Excessive strain on the inflow part will cause wear and tear on the internal impeller, which may easily cause problems such as pump stoppage.
- The pump operation sound can always be heard from the Stream Pump Mini. This is not abnormal. When air enters the pump, it makes a loud noise that differs from the normal operating sound. If this happens, unplug the USB adapter from the power outlet to completely remove the air from the pump, and then turn on the pump again. Using the pump with air in it may cause the pump to stop, which may result in malfunction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>