CADOLA1946 CD1044-JP Giulia Suprema Automatic Watch User Manual

CADOLA1946 CD1044-JP Giulia Suprema Automatic Watch

Product Information

Specifications

• Model: GIULIA SUPREMA AUTOMATIC
• Movement: Mechanical Automatic
• Power Source: Self-winding, no battery needed
• Water Resistance: Water-resistant (details below)

Product Usage Instructions

Winding the Mainspring

1. Before use, manually wind the mainspring to start the watch moving.
2. When in a position [0], turn the crown clockwise to wind 5-10 144 times.
3. Wear the watch for at least 8 hours daily to ensure it is fully wound by the wrist’s motion.

Setting the Time

1. Pull the crown to position [2] (2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown back to position [0].
4. Consider a.m./p.m. when setting the hour and minute hands.

Setting the Date

1. Pull the crown to position [1] (1st click).
2. Turn the crown anti-clockwise to set the correct date.
3. Push the crown back to position [0].
4. Avoid setting the date between 9:00 P.M. and 1:00 A.M.

Water Resistance

• The water resistance serves as a guide and may vary based on factors like temperature and water salinity. Avoid jacuzzis, hot showers, or steam rooms.
• Use the screw-down crown to maintain water resistance.

Resizing Metal Bracelet

1. Use a nylon head hammer to remove links with arrows engraved on them for resizing.
2. Adjust using micro-size adjustments if needed.

FAQ

• Q: How often should I wear the watch to ensure it stays fully wound?
• A: It is recommended to wear the watch for at least 8 hours each day to keep it fully wound.
• Q: Can I wear my watch in a hot shower?
• A: It is not recommended to wear your watch in a hot shower, jacuzzi, or steam room as steam may compromise its water resistance.

To ensure correct care, please take some time to review the enclosed instructions to review how to operate your watch.

AUTOMATIC WATCH

• This timepiece is equipped with a self-winding Mechanical Automatic movement.
• It does not need a battery.
• It is powered by the motions of the user’s wrist during the wear of the watch. You may also choose to wind the watch manually.
• For more details on operating this timepiece please refer to the enclosed booklet or visit

Overview

• BEFORE YOU USE THIS WATCH, IT IS RECOMMENDED THAT YOU MANUALLY WIND THE MAINSPRING TO START IT MOVING.
• THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED WITH A MANUAL WINDING MECHANISM.

WINDING THE MAINSPRING

1. When it is in position [0], turn the crown clockwise to the wind. Wind 5-10 times and it will start to move naturally after shaking slightly.

This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is fully wound. An automatic watch will only wind when the watch is on your wrist and your arm moves. Winding the watch by the crown will put power on the spring but not enough to allow the watch to function fully. If your watch stops overnight or loses time it means it is not being fully wound.

HOW TO SET THE TIME

1. Put the crown to position [2]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown back to position [0].

• Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.

HOW TO SET THE DATE

1. Put the crown to position [1]-(1st click).
2. Turn the crown anti-clockwise to set the correct date.
3. Push the crown back to position [0].

• Do not set the date between 9:00 P.M. and 1:00 A.M.

WATER RESISTANCE

• The water resistance indicated on your timepiece serves only as a guide. Actual water resistance may vary depending on many important factors including temperature, water salinity, and actual use underwater.
• The water resistance of your timepiece may eventually be compromised over time with general wear and tear and the use of your watch under adverse conditions.
• Always remember to employ the screw-down crown (if available) to maintain the water resistance of your timepiece.
• Warranty may be voided if the screw-down crown has not been properly employed.
• Note that you should NEVER wear your watch in a jacuzzi, hot shower, or steam room where steam may enter the case despite the watertight seals used to protect your watch.
• The steam may cause condensation inside your watch, which may affect and damage the inner workings of your watch – which would also not be covered by the warranty.

HOW TO RESIZE METAL BRACELET

• On the inside of the bracelet, you will see some small arrows engraved on removable links.

To ensure correct care, please take some time to review the enclosed instructions to review how to operate your watch.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>