FINGeRTEC Kadex Plus Access Control Device User Guide

: June 28, 2024
: FINGeRTEC

Table of Contents

Kadex Plus Access Control Device
Software Roadmap
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide

Kadex +

Kadex Plus Access Control Device

Terminal Overview

FINGeRTEC Kadex Plus Access Control Device - Fig 1

Quick Start Guide
The Quick Start Guide is intended to provide the user with simple instructions on how to setup the terminal communication with software as well as to perform user data enrollment and verification.

Network configuration
( Ethernet or Wi-Fi setting)
A) ETHERNET
Menu > COMM. > Ethernet > set DHCP ON or can set manually by disable DHCP.
• IP Address • Subnetmask • Gateway • DNS(if required)
B) Wi-Fi
Menu > COMM. > Wi-Fi Settings > WIFI=ON ( Optional upon request to enable the Wi-Fi option )

Make sure the device is reachable with the server.
Do not connect the device via Ethernet and WiFi connections simultaneously 2. Cloud Server Setting
( can connect either to Ingress(AWDMS) or TimeTec solution – Make sure select your preferred Device Type Setting accordingly) Menu > COMM. > Cloud Server Settings
A) Ingress ACC and ATT Mode
Enable Domain Name = OFF
Server Address = Server PC IP address installed with the AWDMS
Server Port = 8088 ( Default AWDMS port number)
B) TimeTec TA / Attendance
Enable Domain Name = ON
Server Address = https://sg-push.zkclouds.com
C) TimeTec Access
Server Address already predefine when selecting Best protocol in Device Type Setting
1. Add Device to Software
  ( can opt either Ingress / TimeTec solution ) – Make sure select your preferred Device Type Setting accordingly
  A) Ingress ATT / Ingress ACC Mode Software Installer:
  Ingress MySQL : https://www.fingertec.com/softwareup-date/ingress/software- ingress_download_e.html
  ADWMS : http://www.fingertec.com/download/AWDMS.zip
  ADWMS Setup Tool: https://s3.amazonaws.com/files.fingertec.com/Software+Releases/AWDMS/AWDMS+Setup+Tool.zip
  – Insert Device Name
  – Select Communication Mode = AWDMS (ACC MODE) / AWDMS ATT (ATT MODE)
  – Key-in Serial No. (Only for ATT mode)
  B) TimeTec TA / Attendance
  Device > Terminal > Smart DBS ( Fingertec & ZKTeco )
  
  click + > Insert Serial Number, Terminal ID , Terminal Group , Location , Timezone , Work Location > Click / to save the changes
  C) TimeTec Access
  – Device > Terminal > Smart DBS ( Fingertec & ZKTeco )
  click + > Insert Serial Number, Terminal ID , Location, Timezone > click / to save the changes
  – Access point > Manage Access point > Add Location
  Assign/Create Building > Create Floor, Upload Floor plan and add Access Points to the respective building
  – Assign devices that you preferred to be connected to the specific Access Points and configure the access settings for each access point then save all changes
2. Upload User to Device
  A) Ingress ACC Mode
  1. Set device access level (only for ACC mode)
  2. Sync to AWDMS (only for ACC Mode)
  3. Set User Access Level (only for ACC mode)
  4. Upload user to AWDMS (only for ACC mode)
  B) Ingress ATT Mode
  Select Users > select Device > select data > Upload
  C) TimeTec TA / Attendance
  1. Device > Terminal > Smart DBS ( Fingertec & ZKTeco )
  2. Select device > Manage terminal
  3. Click Upload User
  4. Select user > click / to submit
  D) TimeTec ACC
  1. Access > Access Group > click Edit > Default Access Group 24 Hours
  2. Select User > Select Access Point > click / to submit
  3. Select Access point > click Sync now
3. Enrolling User Data ( Card / Password )
  Menu > User Mgt. > All Users > select User > Edit > Select Card Number option
  
  Edit > Wave your Card > Esc > click Password > Enter
  Password ( maximum : 8 digit password ) > Ok > Retype password > Ok > Esc to save the changes

Software Roadmap

Online Activation
Use the terminal’sserial number to activate your software online. Contact your local reseller or support@fingertec.com if you require offline software activation.
Software download / User guides Available online at https://product.fingertec.com/userguide.php
System Overview

FINGeRTEC Kadex Plus Access Control Device - Fig 2