adol AS-938 Earphones wireless Game Mode Low User Guide
- June 27, 2024
- adol
Table of Contents
adol AS-938 Earphones wireless Game Mode Low
Specifications
- Compliance: Part 15 of FCC Rules
- Conditions: Must not cause harmful interference, must accept any received interference
Product Usage Instructions
Compliance with FCC Rules
- Ensure that the device is used by Part 15 of the FCC Rules to avoid any interference issues. Follow all guidelines provided in the user manual.
Interference Handling
- If the device experiences interference that affects its operation, try relocating it to a different area. Ensure that no external factors are causing the interference.
Modifications
- Do not make any changes or modifications to the device that are not explicitly approved by the responsible party for compliance.
- Unauthorized modifications may impact the device’s performance and void the user’s authority to operate it.
FAQ
Q: What should I do if I encounter interference while using the device?
A: If you experience interference, try moving the device to a different
location to see if the issue persists.
Make sure no external factors are causing the interference.
Q: Can I make modifications to the device?
A: No, any changes or modifications not approved by the responsible party for compliance could void your authority to operate the equipment. It is recommended to use the device as per the provided guidelines.
Tap method
- Pause/Play/Answer/Hang
- Up (Touch Once)
- Wake up Siri/Reject a call
- (press and hold for 2 seconds)
- Reduce Volume (Double Tap)
- Previous Song (Three Tap)
- Game/Music Mode (Four Tap)
- Pause/Play/Answer/Hang
- Up (Touch Once)
- Wake up Siri/Reject a call
- (press and hold for 2 seconds)
- Increase Volume (Double Tap)
- Next Song (Three Tap)
- Game/Music Mode (Four Tap)
Main parameters
Connection method
- Open the lid of the earphone case, take out the earphone, and move it close to the unlocked phone.
- Wait for about 8 seconds to turn on Bluetooth
- Search for the Bluetooth name and click Connect
- Automatic reconnection: the pairing name of the earphone has not been deleted from the mobile phone. Take out the earphones to automatically reconnect
Charging indication status
- When the charging case is charging (red light flashes)
- When the charging case is fully charged (the red light is always on)
Precautions for use
- In daily use, the charging surface of the earbuds will be stained with dirt and other dirty things, and you can use a cotton swab to clean the electrical contact surface of the earbuds charging.
- The earphones need to be used correctly and standardly, and pay attention to the impact of the use environment on the earphones, to ensure smooth connection, it is recommended that the distance between the mobile phone and the earphones be within 8 meters.
- If the earbuds are not connected or the communication is not smooth, please disassemble the earbuds and their accessories without permission, otherwise there will be no warranty, and do not use the charging head that exceeds the rated ampere volts to charge the earphones.
- To ensure that you use the earphones normally, please make sure that the power of the earphones is sufficient.
Tips
- If your earbuds are seriously hot or burned out during charging, you can see whether you are using a charging head with a power greater than 5V2A, and if it is larger, you need to replace a charging head with a power of less than 5V2A.
- When there is only one side of the left and right earphones, please put the two earphones back into the charging case, the earphones will automatically shut down, open the mobile phone to find the pairing name, click to cancel the Bluetooth pairing, open the charging case, take out the earphones, wait for about 8 seconds to open the mobile phone Bluetooth to search for the Bluetooth name, and click to connect.
- The headphones can’t hear the sound
- Confirm that the earphones are in working condition
- Confirm whether the volume of the earphones is appropriate
- Confirm whether the earphones are normally connected to the mobile phone
- Confirm that the earphones are within the normal working range
- If you hear that the headset is intermittent: in some places, the signal interference is large, and the Bluetooth headset will interfere with the Bluetooth noise floor, there will be an intermittent situation, and it can be solved by disconnecting and reconnecting it elsewhere.
- When the distance between the earbuds and the mobile phone is more than 8 meters or there is an obstacle in the middle, the signal transmission will be affected
- When there is a high-power transmitting device in the vicinity, the signal transmission will be affected
- Tight space will also affect signal transmission (electronic city, etc.)
Warranty card
Warranty card/certificate of conformity
Please keep the warranty certificate and purchase voucher properly, these will be your warranty vouchers. Product warranty (one-year warranty for non-man- made damage)
Maintenance records
Certificate
- Date of manufacture:————————-
- Inspectors:————————————
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>