adol ASD96 Wireless Earphones Instruction Manual

ASD96 Wireless Earphones

AS-D96
Wireless operation manual

1. 1-click:Volume +,Press 3s:Next
2. PAUSE/PLAY
3. 1-click:Volume-,Press 3s:Last
4. Power ON/OFF switch
5. TYPE-C Charging Port
6. 3.5mm Audio Port
7. Microphone
8. Wireless working status indicator light/charging indicator

Asus wireless earphones

• Wireless 5.3 & Wired 3.5
• Equipped with 50mm Speakers
• With ultra-low latency
• Plug-in use
• Featuring skin friendly leather material and adjustable headbands&earmuffs supports you for a long period of wear without fatigue
• The Battery Life is up to 20 Hours.
• Foldable design
• Build-in microphone with noise-cancellation function can capture and convey your crystal clear voice.
• Multiple platform compatible: PC, and Smart phone which equipted with BT

Specification

Operations

LED Indicator Status

Function Key Operation

Tips

1. The headset cannot be used to listen the music only when using 3.5mm audio cable
2. After inserting the 3.5 audio cable into the socket, the Bluetooth will automatically power off, and the wireless will automatically power off during charging.
3. There is a prompt sound for both wireless disconnection and connection, and it automatically shuts down 5 minutes after disconnecting the wireless connection;
4. If you do not plan to use this product for a long time, please store it in a dry environment and charge the headset at least once a month to extend its battery life.

Operating Enviroment

1. Do not use the device in dusty, wet, dirty or close to the magnetic field, so as not to cause internal circuit failure. When placing the device, please keep away from the electrical appliances with strong magnetic field or strong electric field, such as microwave  oven, refrigerator, etc
2. Do not use this device in thunderstorm weather which may cause device failure or electric shock hazard. Please use the device in the temperature range of-10C-+55C, When the ambient temperature is too high or too low, it may cause device failure.
3. Do not put the device lose to heat source or exposed fire source, such as electric heater, microwave oven, oven, water heater, fire, candle or other places that may produce high temperature.

Battery Safety

1. Do not disassemble or modify the battery, insert foreign matters, or diffuse into water or other liquids to avoid battery leakage, overheating, fire or explosion
2. Do not disassemble or modify the battery, insert foreign matters, or diffuse into water or other liquids to avoid battery leakage, overheating, fire or explosion.
3. The device is equipped with a non removable built-in battery, do not replace the battery by yourself to avoid damaging the battery or device, causing explosion and setting on fire

Environmental Protection

1. Do not treat this device and its accessories as ordinary domestic waste.
2. Do not treat this device and its accessories as ordinary domestic waste.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in  a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The device can be used in porlable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>