Shengda D310 3 Channels Car DVR Camera User Manual
- June 27, 2024
- Shengda
Table of Contents
Shengda D310 3 Channels Car DVR Camera
Product Information
Specifications:
- 3 channels camera
- Built-in 64M DOR
- 3.16-inch IPS high-definition screen
- LCD resolution: 640×320 pixels
- USB: 5V/1A
- External port: Max support 32G Class10 TF card
- Speaker: Monophonic 15*10mm speaker
- MIC: 4015 Standard Omnidirectional Microphone
- Image format: JPG
- Camera resolution: Max support 3M
Features
Front Camera | 6 glass/F2.0 aperture/170° wide angle |
---|---|
In-car Camera | VGA 120° |
GPS Tracker | No |
AV OUT | No |
Rear Camera | 5.5 cable/2.5mm port |
Photo | Support |
Lens Rotate | Adjust manually |
WDR | Support |
HDR | Support |
Image Format | JPG |
Video Format | AVI |
Image Coding Format | H.264 |
Battery | 150mAh polymer lithium battery |
Language | Support multi-language |
G-sensor | Support |
Motion Detection | Support |
Delay Shutdown | Support |
Loop Recording | Support, Do not leak seconds |
Sound Record | Support |
Fill Light for Night Vision | Support |
Parking Monitoring | Support (Open manually) |
Front Camera Resolution | Max 1680×960 (30f/s) |
In-car Camera Resolution | HD 640×480 (25f/s) |
Camera Resolution | Max support 3M |
Product Usage Instructions
Power Button:
Short press to turn on/off the screen. Long press to switch on/off the device.
Menu and Camera/Playback:
Press [OK] key to stop recording. Press [M] to enter photo mode.
Press [OK] to take a photo. In camera mode, press [M] to enter playback mode.
Press [OK] key to playback.
Lock Function:
In video recording, short press [M] for a key lock function to protect the current video file from being overwritten by the cycle video.
Recorder Menu:
- Resolution
- Brightness
- WDR (Wide Dynamic Range)
- Loop recording: Off/1 minute/2 minutes/3 minutes
- Motion Detection: On/Off
- Sound record: On/Off
- G-sensor: High/Medium/Low
1 | Resolution | 1080P FHD/720P/VGA |
---|---|---|
2 | Loop Recording | Off/1 minute/3 minutes/5 minutes |
3 | HDR | On/Off |
4 | Exposure | +2, +1, 0, -1, -2 |
5 | Motion Detection | On/Off |
6 | Record Audio | On/Off |
7 | Date Stamp | On/Off |
8 | G-sensor | High/Medium/Low |
9 | Parking Monitor | On/Off |
10 | Frequency | 50Hz/60Hz |
11 | Screen Saver | Off/1 minute/3 minutes |
12 | Format | Yes/No |
13 | Default Setting | Yes/No |
14 | Version |
Buttons
Power Button
Short press to turn on/off the screen. Long press to switch on/off the device.
Menu (M) Button
Press [OK] key to stop recording, press [M] to enter photo mode, press [OK] to take a photo. In the camera mode, press [M] to enter playback mode, press [OK] key to playback. Lock function: In case of video recording, short press [M] for a key lock function to protect the current video file, and this file will not be covered by the cycle video. In video mode, long press [M] to enter video menu settings as follows:
Photo Mode
In photo mode, long press [M] to enter photo menu settings as follows:
1| Shooting Method| Single shooting/2 seconds timer/5 seconds timer/10 seconds
timer
---|---|---
2| Resolution| 1M/2M/3M
3| Continuous Shooting| On/Off
4| Picture Quality| High quality/standard/economy
5| ISO| Auto/100/200/400
6| White Balance| Auto/sunlight/cloudy/tungsten lamp/fluorescent lamp
7| EV| +2, +1, 0, -1, -2
8| Anti-shake| On/Off
9| Quick Review| On/Off
Reset Key (RESET)
If the device freezes and accidental operation is not a normal fault, press [RESET] to shutdown the device, then press [OK] to reboot the device.
Installation Notes
- Please tear off the rear camera’s film; if it exists, wash the front/back glass near the rear window with water and dry it.
- Insert the rear camera into the rear camera port.
- Fix the rear camera with 3M tape.
- Connect the rear camera cable to the front camera.
- Adjust the rear camera angle.
- Insert the car charger into the car’s cigarette lighter.
- Connect the car charger to the front camera.
- Fix the front camera to the windshield.
- Adjust the front camera angle.
Features
- Use the advanced recording functions. The camera will automatically start recording when the car engine starts and stop recording when the car engine stops.
- In case of an accident, the G-sensor will lock the current video file to prevent it from being overwritten.
- Supports loop recording. When the memory card is full, the oldest video file will be overwritten by the newest one.
- Supports motion detection. When the camera detects movement, it will start recording automatically.
- Supports parking monitoring. When the car is parked, the camera will start recording if it detects any movement or impact.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Frequently Asked Questions
Q: What is the maximum resolution for the front camera?
A: The front camera supports a maximum resolution of 1680x960 (30fps).
Q: How to reset the device?
A: Press the RESET key to shutdown the device, then press OK to reboot.
Q: How to enter playback mode?
A: In the camera mode, press M to enter playback mode, press OK key to playback.
Q: How to lock a video file?
A: Short press M for a key lock function to protect the current video file.
Q: How to adjust the G-sensor sensitivity?
A: In the settings menu, adjust the G-sensor sensitivity according to your preference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>