PROGRESSIVE LIGHTING 1100-4V-CH 4 Light Vanity Light Instruction Manual
- June 13, 2024
- PROGRESSIVE LIGHTING
Table of Contents
PROGRESSIVE LIGHTING 1100-4V-CH 4 Light Vanity Light
Product Information
The product is a fixture that requires installation. It is essential to follow the provided instructions for proper and safe operation. The fixture comes with a universal mounting plate (B) and requires grounding for safe usage. The fixture wires are divided into two groups, Group A and Group B, which need to be connected to the corresponding wires from the outlet box.
Product Usage Instructions
- Before starting the installation, ensure that the electricity to the wires you are working on is shut off. Remove the fuse or shut off the circuit breaker.
- Take out the fixture from the carton and ensure that all parts, including screws, are included.
- Secure the universal mounting plate (B) to the outlet box using outlet box screws. Do not attach the fixture directly to the outlet box.
- For grounding, insert the green grounding screw into the hole with two raised dimples on the circular strap. If the fixture has a ground wire, wrap it around the grounding screw and connect it to the ground wire from the outlet box using a wire connector. If the fixture does not have a ground wire, wrap the ground wire from the outlet box around the grounding screw and tighten it.
- Identify the color of the wires on your fixture and connect them according to the following groups
- Group A : Connect to Black House Wire
- Group B : Connect to White House Wire
- Place the fixture wires from Group A evenly against the black wire from the outlet box. Do not twist the wires together.
- Fit a wire connector over the wires and screw it clockwise until it feels firm.
- Check the connection by gently trying to pull the connector off the wires. If it comes off, repeat steps 6 and 7 and ensure a firm connection.
- Connect the fixture wire from Group B to the white wire from the outlet box using the same method as in steps 6 and 7.
- After connecting the wires, tuck them carefully inside the outlet box.
- Assemble the backplate to the universal mounting plate (B), ensuring that the mounting holes align properly.
- Tighten the backplate on the universal mounting plate.
Please note that the line art shown may not exactly match the fixture enclosed, but the installation steps apply to this fixture. The item numbers for different variations of this fixture are: 1100-1S, 1100-2V, 1100-3V, 1100-4V, and 1100-5V.
INSTALLATION AND SAFETY INSTRUCTIONS
FOR YOUR SAFETY WARNING
BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER
THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS SHUT OFF.
GENERAL
You don’t need special tools to install this fixture. Be sure to follow the
steps in the order given. Under no circumstances should a fixture be hung on
house electrical wires, nor should a swag type fixture be installed on a
ceiling, which contains a radiant type heating system. Read instructions
carefully. If you are unclear as to how to proceed, consult a qualified
electrician.
NOTE: Proper wiring is essential for the safe operation of this fixture.
FIXTURE ASSEMBLY
Carefully removed the fixture from the carton and check that all parts are
included as shown in figure. Be careful not to misplace any of the screws or
parts, which are needed to install this fixture.
INSTALLATION
- IMPORTANT: Do not attach fixture directly to outlet box.
- STEP 1 : Secure universal mounting plate (B) to outlet box with outlet box screws
GROUNDING INSTRUCTIONS
-
STEP 1 : Insert the green grounding screw into the hole with two
raised dimples on the circular strap. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector (not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it. -
NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
-
STEP 2 : Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below
GROUP A: Connect to Black
House Wire
| GROUP B : Connect to W h i t e
House Wire
---|---
BLACK| WHITE
*PARALLEL W I R E ( round &
smooth)
| *PARALLEL W I R E ( square &
ridged)
WHITE OR GREY WITH TRACER| WHITE OR G R E Y
W I T H O U T TRACER
BROWN G O L D OR
B L A C K WITHOUT TRACER
| BROWN, GOLD OR BLACK WITH TRACER
-
*NOTE: When parallel wire (SPT-I & SPT-2) is used, the tracer wire is square shaped or ridged and the less tracer wire is round in shape or smooth (seen best when viewed from wire end.) STEP 3: Take your fixture wire(s) from group A and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
-
STEP 4 : Fit a wire connector (not supplied) over the wires and
screw the connector clockwise until you feel a firmness. -
STEP 5 : Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4, as above, and check again for a firm connection.
-
STEP 6: Connect the fixture wire from group B to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.
FINAL ASSEMBLY
- STEP 1 : After wires are connected, tuck them carefully inside outlet box. Assemble backplate to the universal mounting plate (B) allowing the mounting holes are align up.
- STEP 2 : Tighten the backplate on the universal mounting plate with the mounting screws (A) from the top and the bottom of the backplate, slide the glass (E) over the socket, then secure the retaining ring (G) and metal cover (F) to the Socket with spacer tool (H).
- STEP 3 : Install light bulb. (BULB IS NOT INCLUDED, please do not exceed the maximum capacity recommended on the socket.)
CLEANING
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not
use abrasive materials such as scouring pads or powders, steel wool or
abrasive paper.
ORDERING PARTS
Keep this sheet for future reference, and in case you need to order
replacement parts. All parts for this fixture can be ordered from place of
purchase. Be sure to use exact wording from illustration when ordering parts.
Line art shown may not exactly match the fixture enclosed. However, the installations do apply to this fixture.
- ITEM NO : 1100-1S 1100-2V 1100-3V 1100-4V 1100-5V
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>