Shengda 2BDTU-TY Wifi Smart Light Instructions
- June 15, 2024
- Shengda
Table of Contents
Shengda 2BDTU-TY Wifi Smart Light
Download” Tuya/Smart Life” app
|
---|---
| 
| 
Register an account and choose your country
- Connect your phone to WiFi (Only 2.4Ghz)
- Turn on the phone’s WI FI/Bluetooth
Turn on/off 5 times(on/off/ on/off/on)
Adjust the bulb to blink
Initialize the smart bulb device
Connect to a 2.4Ghz wifi network(5Ghz is not supported) and turn on Bluetooth on your phone
Connect succeeded. You can control the smart bulb with Tuya smart app now
Connect to Alexa/ Google Home
FAQ & Feedback
- When your Phone turn off Bluetooth, the lights will be disconnected, unable to control.
- You can link 100 Bluetooth light bulbs at the same time to upgrade them into voice control and remote
- Can be controlled remotely, provided that you have a Tuya Bluetooth gateway.
- Works with Alexa, Google, provided that you have a Tuya Bluetooth gateway.
- You can group and manage lights in Alexa APP
- Restore the factory equipment, the equipment continuously switch [power off power on] five times to enter the factory settings flashing
12-month quality guarantee
Connection failure or other problems are often caused by poor compatibility
between the router and the mobile phone please contact us, we have
professional technicians to help you solve it. after we help you solve the
problem, please give us a positive evaluation, we need your affirmation and
encouragement Thank you .
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>