Walmart 9809H Party Speaker with Tripod User Manual
- June 26, 2024
- Walmart
Table of Contents
Walmart 9809H Party Speaker with Tripod
Product Information
Specifications
- Model: 9809H Party Speaker with Tripod
- Power Input: 5V 500mA
- Bluetooth Range: < 33 ft.
- Microphone Input: 6.3mm jack
Product Usage Instructions
-
Power On/Off
Switch on or off the unit by toggling the power button located on the back of the speaker. -
Charging
Ensure the device is fully charged by connecting the USB charge cable from its Micro USB port to a computer or charger with an input power of 5V 500mA. The red light will turn off when charging is complete. -
Bluetooth Mode
Long press the M button to turn ON/OFF the LED light. The speaker automatically enters Bluetooth Mode when powered on. To pair, search for BTX8 on your Bluetooth device and connect. Use passcode 0000 or 1234 if needed. The speaker can be paired with another unit for stereo pairing. -
Auxiliary Input Mode
Connect an audio device through the 3.5mm aux-in cable to enter Aux mode. Adjust volume using the power button. -
TF Card/USB Drive Mode
Insert a TF card or USB drive to play music automatically. Control playback and volume using the buttons on the speaker. -
FM Radio Mode
Switch to FM Radio mode by pressing the M button. Search for and select channels using the buttons on the speaker. -
Karaoke Mode
Enjoy Karaoke by inserting a 6.3mm jack wired microphone into the speaker.
Frequently Asked Questions (FAQ)
-
Q: How do I pair two units for stereo pairing?
A: Turn on both units, ensure they are in Bluetooth mode, then press and hold the >II button on one unit to pair with the other. Follow Bluetooth mode steps to connect to your device. -
Q: How do I switch between different modes?
A: Press the corresponding buttons or follow the instructions for each mode – Bluetooth, Auxiliary Input, TF Card/USB Drive, FMRadio, or Karaoke mode.
9809H Party Speaker with Tripod
USER MANUAL
(Read before proceeding)
- Switch on or off unit by switch the “power” button on the back of the unit.
- The item should come with enough power be powered on. If you are having trouble pairing or powering-on it, please make sure it is fully charged.
- Use the USB charge cable connected to the item from its Micro USB port to your computer or charger. The charging input power is 5V 500mA.
- The red light will turn off when charging completes.
- Long press the “M” button to turn ON/OFF the LED light.
Bluetooth Mode
- Once powered on, the item turns into Bluetooth Mode by default while there is no other connection.
- The item will automatically connect to the last Bluetooth device first. If nothing found, it will search for a new one.
- On the Bluetooth device, switch on Bluetooth setting and search for “BTX8”. For the first-time connection, select “BTX8” to start connection. If necessary, enter the pass code 0000 or 1234.
- To disconnect from current Bluetooth device, switch off Bluetooth from current Bluetooth device.
- Once connected, you can listen to music from the unit wirelessly (< 33 ft.). The music streaming may be interrupted by obstacles between the device and the item such as walls, metallic casing that covers the device or other devices nearby that operate in the same frequency.
- Press “ >II ” button one time to play or pause the music; short press “I<< ” or “ >>I ” button to skip songs;
- Rotate the power button to adjust the volume.
Stereo Pairing Function (requires a 2nd unit):
- Turn on the 2 different units and ensure they are in Bluetooth mode.
- Press and hold “>II” button on one of the units and wait for them to connect with each other.
- Once both units are paired with each other, follow the “Bluetooth Mode” steps the connect them to your device.
- To disconnect the two units actively, press and hold the “>II” button on any of the units.
Auxiliary Input Mode:
- Once powered on, connect the item to the audio device through the 3.5mm aux-in cable(not included), the unit will turn into Aux mode automatically.
- Press “>II” button one time to enter silent mode.
- Rotate the power button to adjust the volume.
TF Card/USB Drive Mode
- Once a TF card/USB drive is inserted, the unit will turn into TF card/USB driver play mode and plays music automatically. Press the “>II” button one time to play or pause the music.
- Short press the “- ” or “ + ” button to skip songs;
- Rotate the power button to adjust the volume.
FM radio mode
- Once powered on, short press the “M” button to change to “FM Radio” mode.
- Press and hold the “>II” button to start searching and lock all possible FM channels automatically. When searching finishes, there will be no channel changing.
- Press the “- ” or “ + ” button one time to select a channel.
- Rotate the power button to adjust the volume.
Karaoke radio mode
Once power on, insert 6.3mm jack wired microphone (not included) to enjoy
Karaoke.
FCC
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment